136 



^ GRIFFITH ®. TURNER CO^ 



Windrowers 

 and 



Pea 

 Harvester 



Use the Blocki Windrower for harvesting the seed crops of 

 red, alsyke, mammoth and alfalfa clovers. Sometimes also 

 used for harvesting flax, buckwheat, and even short tangled 

 grain. Is an excellent tool to harvest cow peas, beans, etc. 

 Can be readily attached to any mower and gives the best sat- 

 isfaction. The guards are strong, being made of malleable 

 iron; the rods retain their shape because they are made out 

 of_the right kind of steel. 



Pea Harvester No. 7X consists of 7 Guards, 7 Rods 



Block 

 and Divider. 



Blocki Pea Harvester No, 

 and Divider. 



Blocki Pea Harvester No. 



Prices 



and Divider 

 No. 7X. 



No. 8x ; ; ; ■ 



No. 9X 



Extra Guards, each 



Windrower for 4%- or 5-ft 

 Windrower for 6-ft. Mower 



8X consists of 8 Guards, 8 Rods 

 9X consists of 9 Guards, 9 Rods 



Mower . 



.$25.00 

 . 27.50 

 . 30.00 

 . . 3.80 

 . 15.00 

 . 17.25 



KEYSTONE TONGUE 

 SUPPORT 



Por Harvesting AEacblnery 

 and Disk Harrows. 



This Tongue Support is simple 

 and light in weight. The springs 

 are made of best %-inch spring 

 steel. The coils are 4% inches in 

 diameter, and have arms extend- 

 ing 12 inches. The wheel is 11% 

 inches high, with 2 %-inch tread, 

 thus assuring a light draft. No 

 holes need to be bored in the 

 tongue to fasten this support, 

 thus allowing the tongue all its 

 strength. Price, $5.00. 



The Schick All Steel Baler 



This baler is a device that 

 is so low in initial cost that 

 the material which it con- 

 serves pays for it in a short 

 |time. It bales all kinds of 

 material, such as paper, scrap, 

 pasteboard boxes, excelsior, 

 cloth clippings, old rags, to- 

 bacco stems, tin and galva- 

 nized scrap in can factories, steel 

 shavings in machine shops, etc. 



The great and increasing demand 

 for all kinds of waste material of 

 eyery description has put you in a 

 position to change this waste into 

 cash. 



This shows the top of the SCHICK 

 BABER. Note the solid one-piece 

 casting supporting the geared rack. 



A pressure of three tons is ob- 

 tained by means of the wheel and 

 hand lever. 



There are but five working parts. 

 All made of crucible steel, case 

 hardened, making it easy and simple 

 to operate. 



As waste paper accumulates it is emptied into the Schick; 

 a turn of the wheel compresses it. When bale is compressed 

 it is wired and ready to remove from the press. 

 No. 2 — Open Top Schick All Steel Baler Bales, from 



100 to 150 pounds $ 70.00 



No. 3 — Open Top Schick All Steel Baler Bales, from 



150 to 200 pounds 85.00 



No. 4— Open Top Schick All Steel Baler Bales, from 



200 to 350 pou nds 1 25.0O 



LINK CHAIN BELTING 







Av. Ult. 



Price Price 





Links 



strength 



per ft. all 



per 



No. 



per ft. 



lbs. plain links link 



25 



13.3 



700 



15c. 



3c. 



32 



10.4 



1100 



16c. 



3c. 



33 



8.6 



1190 



15c. 



3c. 



34 



8.6 



1300 



17c. 



3c. 



35 



7.4 



1200 



18c. 



3c. 



42 



8.75 



1500 



19c. 



4c. 



45 



7.4 



1600 



16c. 



3c. 



48 



6. 



1660 



20c. 



4c. 



50 



8.7 



1900 



22c. 



5c. 



51 



10.4 



1900 



23c. 



6c. 



52 



8. 



2300 



23c. 



50. 



52ya 



7.9 



2866 



30c. 



6c. 



55 



7.4 



2200 



20c. 



5c. 



62 



7.25 



3100 



27c. 



6c. 



65 



5.66 



2460 



29c. 



8c. 



72 



5.9 



4240 



48c. 



8c. 



72 V2 



7.25 



4590 



52c. 



9c. 



761/2 



5.8 



3890 



35c. 



9c. 



77 



5.2 



3600 



32c. 



9c. 



PITMAN STRAPS OR CLASPS 



\WEAK,r iij _ PLATES 1^^^ 



BINDER CANVAS SLATS 



Each, 10c. 



KNIFE CLIPS price, 

 To Pit the FoUowingr Machines: Each. 



Champion, A413, A468, A467, A693.$ .15 



M533, H496, 



Deering, P94, B461 

 McCormick, M254, 



H919, L39 



McCormick, M290, M293, M652. 

 Milwaukee, Jl. Osborne, E36... 



Osborne (Columbia), K256 



Piano, J46, J106, J325 



Wood, 171, 1432 



.15 



.15 

 .25 

 .15 

 .15 

 .15 

 .15 



WOOD PITMANS 



("Without Pitman Box and Bolts.) 

 To Pit the PoUowingr Machines: 



Deering (Ideal Mower), 1901 and 

 since, D1471 $1.75 



McCormick (Big 4 Mower), 1896 



and since, M392..., 1.75 



Milwaukee (No. 6 Mower), 1894 

 and since, PN290 1.75 



WEARING PLATES 



To Pit the Pollowingr Machines: 



Champion, H315, Under Shoe Cap. 

 Champion, H282, Under Clips. 

 Deering, D1038, Under Clips. 

 Deering, 1040, Under Shoe Cap. 

 Deering, D1455, Under Shoe Cap. 

 McCormick, M468, Under Clips. 

 McCormick, M490, Under Shoe Cap. 

 Milwaukee, PK156, Under Clip PJl. 

 Milwaukee, PG157, Under Shoe Cap. 

 Osborne, K325, Under Clips. 

 Osborne, K326, Under Shoe Cap. 

 Price $0.15 



PITMAN STRAPS OR CLASPS 



To Pit the Pollowingr Machines: 



Malleable Deering, D464, D465, 



Dens, D606, D470, D607. Each... $.30 



Malleable McCormick, M556, M557, 



M147, M304, M315. Each .30 



SPRING COTTERS 



Assorted, box of 100. 



.75c. 



PITMAN WOODS 



Finished and Bored, Without Straps, 

 Bolts and Boxes. To fit the following 

 machines: Deering (Ideal Mower). Mc- 

 Cormick (Big 4 Mower). Milwaukee 

 (No. 6 Mower). Pla,no (Jones Mower). 

 Each, 60c. 



PITMAN BOLTS 



To Pit the Pollowintr Machines: 



Deering Knife End. Deering Box End. 

 McCormick. M322, with Nut; M483, 

 with Nut 2y2x7-16; with Nut 3x7-16. 

 Milwaukee, with Horn Nut, PG174. 

 Milwaukee, with Ratchet Nut, PG175. 

 Osborne, Box End (Long). 

 Osborne, Knife End (Short). 

 Wood, with Nut 9 .15 



PRICES IN CATAl^OG SVTBJECT 

 TO CHANGE WITHOUT NOTICE. 



