GRIFFITH ®. TURNER CO 



45 



STOVER TILTING TABLE SAW no. 62 



The table is of the slat type, has five flat steel strips or 

 braces bolted to the same and bent at right angles so as to 

 form a rigid guard for the wood. This construction adds 

 materially to the life of the table, as the wood to be sawed 

 does not come in contact with wood part of the table at any 

 part of the frame. When the wood is thrown on the table 

 it rests on the steel strips and when the wood is pushed to- 

 ward the saw the steel braces carry the strain. The frames 

 are strongly and carefully built and with ordinary care and 

 attention will last indefmitely. 



■Weiffht, without Blade, 250 

 Fovmds. 



Size of Pulley, 5 or 8 in. 

 Diameter by 6 in. race. 



Speed, 850 to 1,000 R. F. M. 



Without Saw Blade $34.80 



With 22-lnch Saw 38.80 



With 24-inch Saw 39.40 



With 2e-inch Saw $4ai0 



With 28-inch Saw 41.10 



With 30-inch Saw 42.00 



SLIDING TABLE 



Without Saw Blade $45.65 



With 22-lnch Saw 49.35 



With 24-inch Saw 49.95 



With 2G-inch Saw $50.75 



With 2S-inch Saw 51.65 



With 30-inch Saw 52.55 



GRITCO CIRCULAR SAW 



These Saws are the result 

 of over 50 years' study and 

 experience. Absolutely the 

 best steel is invariably used 

 and each blade is given a 

 tough, even temper and per- 

 fect tension, all of which is 

 essential to the successful 

 running of the saw. The 

 workmanship of these blades 

 is unequaled. The prices 

 given are for saws sharpened 

 and set. All blades with 

 1%-inch hole. 



Retail 



22-inch, No. 12 gauge .$4.00 

 24-inch, No. 11 gauge. . 4.60 

 26-inch, No. 11 gauge . 5.40 

 28-inch, No. 10 gauge . 6.50 

 30-inch, No. 10 gauge . 7.20 



STOVER POLE SAW NO. 54 



No. 54 Stover Pole Saw has the advantage of having the 

 fly wheel underneath where it is out of the way and will 

 permit the sawing of long poles. A compact outfit easy to 

 move and anchor. 



Without Saw Blade $54.75 



With 22-inch Saw 58.75 



With 24-inch Saw 59.35 



With 26-inch Saw $60.15 



With 28-inch Saw 61.05 



With 30-inch Saw. 



61.95 



STOVER NO. 57 SAW FRAME 



QUICKZ.V ATTACHED 



The frame is carried on four castings attached to the 

 upper and lower ends of the radiator by four bolts that run 

 in front and in back of the radiator. Thus, you attach the 

 Stover Frame without disturbing one snigle bolt or nut on 

 the Fordson, also without drilling any special holes or fur- 

 nishing any special equipment. 



The frame is shipped knocked down with instructions for 

 assembling with all of the equipment illustrated, and which 

 includes the frame, 30-inch saw, sufficient length of 5-inch 

 rubber belt, 8x6 inch pulley on saw mandrel, and special 

 starting crank that slips through the 

 frame to permit starting with the; 

 frame attached. Shipping welght.i 

 knockeddown, 250j 

 pounds. 



PRICE $54.5< 



5 



STOVER PORTABLE SAW RIG 



The under carriage is an ordinary farm truck with stec 

 wheels heavy enough to carry our 6 H. P. engine. The chat 

 nels are steel I-Beams securely bolted to the truck bolstei 

 to which is attached our No. 56 tilting wood sawing tab^ 

 with self-aligning, self-adjusting bearings, that was special; 

 designed by us for mounting on a portable rig of any df 

 scription for either custom or individual work. The equi, 

 ment includes plain pulley on the engine, circular saw, be: 

 belt idler, pole, but no neckyoke or doubletrees. 



