GRIFFITH <a TURNER CO 



^163 



HUDSON WATER BOWLS 



STEEL WATER BOWL 



The Hudson New Steel Water 

 Bowl will not break. The bowl 

 has a greater capacity and is 

 easier handled; made of one 

 piece of heavy gauge steel, 

 galvanized, and attached by 

 means of a special designed 

 clamp, which grips the bowl so 

 firmly that there is no possi- 

 bility of it being knocked off 

 by the cow. 



Made of 14-gauge steel; 

 formed with a heavy rolled 

 rim and galvanized afterwards, 

 so that the galvanizing will not 

 be cracked in the process of 

 manufacture. 



Size, 4% Inches deep, 10 

 inches across the top. 



Best Malleable Fittings, Brass 

 Valve Fitted with standard size 

 Rubber Fuller Ball, same as used in any ordinary water fau- 

 cet; easily replaced. Valve seat of brass; will not rust. 

 Pressure plate made of Malleable Iron, and rests low in the 

 bowl, thus avoiding interference with the cow's muzzle in 

 drinking. 1-inch pipe should be used for main supply pipe 

 and %-inch for the short length to connect the bowl to the 

 main supply pipe. 



Bowl weighs 6% pounds each. 



Price $3.85 



QUICK DETACHABLE BOWL 



(Quick Detachable, Antomatic) 



It is easy to install 

 and can be attached to 

 either wood or steel 

 stalls. 



It is easy to operate; 

 the slightest pressure of 

 the cow's nose opens 

 the valve and allows the 

 water to flow as fast as 

 she drinks. As soon as 

 she raises her nose the 

 water stops instantly. 



No chance to overflow. 



The pressure plate is 

 arranged so it can be 

 easily removed to pre- 

 vent the animal drink- 



Specifications: The Bowl is 9% inches across top, 4% inches 

 deep, and is made of the best quality gray iron. 



The intake casting and bracket, valve housing and pressure 

 plate are all made of malleable iron. 



The Valve is Fuller Ball Type, consisting of brass plunger, 

 brass spring and hard rubber head. The valve seat is brass 

 bushed. Size of intake pipe, % inch. 



Weight, 11 lbs. 



Price $3.65 



HUDSON SANITARY STEEL PENS 



No. 58A — Steel cow Pen illustrated 

 below is ideal for a maternity pen 

 and can be used for a testing or 

 feeding pen. 



Specifications: The panel bars of 

 the No. 58A Pen are 11-16" O. D. 

 High Carbon Steel Tubing, spaced 

 not over 6" on center with strong 

 malleable iron fittings. Corner posts. 

 Intermediate Posts, Gate Posts, Top 

 and Bottom Rails and Gate Frame 

 are 1%" O. D. High Carbon Steel 

 Tubing. The gate is furnished with 

 heavy malleable hinges and is sup- 

 plied with a latch that has a grav- 

 ity lock, which can only be opened 

 by the operator. The Pen is 4' 9" high. 



Hudson Cow Pens can be furnished 

 with any style corner or square 

 manger, and with adjustable stan- 

 chion built in panel if desired. Weight, 

 22 lbs. per lineal foot. Price, per 

 foot, $3.85. 



Cow Pen Gate Fittings and 

 Arch, per set $6.35 



Cow Stanchion Built in Panel, 



Each 4.53 



No. 62 Cow Pen, Galvanized 

 Titling Manger 18.25 



The Bull Pen shown in the cut be- 

 low is our No. 63 with No. 65B cor- 

 ner manger. Hudson Bull Pens can 

 be equipped with high or low corner 

 mangers with or without gate, or 

 square manger can be furnished if 

 desired. An adjustable, wood lined, 

 tubular steel stanchion built in the 

 panel can be had when specified. All 

 posts, top rail and panel bars in the 

 Hudson Bull Pens are 1%" O. D. 

 High Carbon Steel Tubing. The filler 

 bars or spindles in the manger rail 

 are 1 5-16" O. D. tubing. Hudson 

 Bull Pens are made only in curb con- 

 struction with each filler bar run- 

 ning into the cement and bolted to 

 angle iron anchor which runs the 

 full length of panel. This construc- 

 tion provides a pen of unsurpassed 

 strength. Weight, 291/2 lbs. per lin- 

 eal foot. Price, per foot, $4.0O. 



Bull Pen Gate Fittings and 



Post to ceiling, set $8.35 



Bull Pen Stanchion Built in 

 Panel 4.70 



No. 58A 



KUSBOir CAI.F FEK. 



Srown above 

 with adjustable 

 lever operating 

 calf stanchions 

 built in panel. 

 Each stanchion 

 can be operated 

 singly. Pen 

 equipped if de- 

 sired with head 

 guards, pail 

 holders, etc. 

 Specifications 

 same as cow 

 pen except that 

 Hudson Calf 

 Pens are 4' 6" 

 high. Weight, 

 per foot, 15 lbs. 

 Price, per foot, 

 $2.25. 



Calf I'on Gate Fittmgs and Arch, per set $6.40 



Calf Pen Stanchions Built in Panel, each 1.15 



Calft Pen Head Guards, each 2.30 



Calf Pen Pail Holder, each 1.45 



