170 ^ GRIFFITH ®. TURNER^^O_^ 



Hudson Chain Hoist 

 Litter Carrier 



No. 58B. — Rigid Track Only. 



This Hudson Heavy Duty Back Geared Litter Carrier is the 

 result of long years experience in the carrier business. This carrier 

 combines great strength and rapid action. It will carry the heaviest 

 loads with perfect ease. The hoisting chain is of special strength 

 and is of a length to correspond with the shaft on which it winds. 

 Longer chains furnished if specified for special jobs. Carrier is 

 equipped with friction brake. The tub is made of heavy galvanized 

 Bheet steel reinforced around the top and ends with 1 inch angle 

 iron closely riveted. The carrier locks at both ends, which in- 

 creases the life of the carrier. The bale is constructed of 1 inch by 

 114 inch channel steel strongly reinforced. The chain shaft is 

 1 inch cold rolled steel. Full swiveled, tandem trucks which give 

 greater bearing on the track and ease in turning corners. 



No. 58B — Tub. 44 inches long, 26 inches wide, 22 inches deep, 

 inside measurements, capacity, 13 bu. "Weight, 200 lbs. Price, 

 $47^0. 



HUDSON FEED CARRIER 



No. 40C. 



The Hudson Raising and Lowering Feed Carrier has all the 

 track operating features found in our celebrated line of litter 

 carriers, and Is furnished with a tub or a carrier box, that is made 

 of selected materials, and shaped so that the operator can work 

 from either end when feeding. 



Equipment can be furnished for the installation of a system of 

 trackage in connection with the litter carrier system. 



Capacity, 16 bushels. Weight, 225 pounds. Price, $ ia.00. 



Hudson Track Equipment 



No. 104. 



r 



L 











No. 102. 



No. 90A. 



No. 102 — I-Beam Track — This track with hangers placed two 

 feet apart will carry many times the load it will ever be called upon 

 to sustain. It is not necessary to have bends made at the factory 

 as the track can be curved to fit when being installed, 

 extension desired. 



No. 103— Two Way all Steel Mounted Switch. 



No. 104 — Three Way all Steel Mounted Switch. 



High quality steel and malleable iron are used in the construction 

 of these switches, insuring durability. 



Mounted and ready for installation — need no assembling on the 

 job. 



Either two or three way switches, right or lest hand, can be 

 furnished. Both styles operate in same manner. 



No. 102— Track per foot 9 ^ 



No. 90B — Hangers, 4 inch, each 33 



No. 90F — Hangers, 8 inch, each 37 



No. 90L — Hangers, 12 inch, each 40 



No. 90P — Hangers, 16 inch, each 45 



No. 103 — Two Way Switch 8.00 



No. 104 — Three Way Switch 9.65 



Hudson Floor Feed Truck 



k:' HUD SON 



This a very convenient and durable truck, built of selected 

 lumber well put together and strongly reinforced. 



Load is evenly balanced on wheels, making truck, easy to handle. 

 Wheels are located so that truck may be turned in its own length. 



Main wheels are fourteen inches high with a two inch face. 

 Castor wheel is seven inches in diameter. Axle is one inch cold 

 rolled steel shafting. Capacity sixteen bushels. 



This truck can be furnished with or withour the Hudson Scale 

 Arch. 



No. 41 Hudson Floor Feed Truck, galvanized steel bottom. 

 Weight, 210 pounds. Price, $37.50. 



ALL PRICES IN CATALOG SUBJECT TO CHANGE WITHOUT NOTICE. 



