114 



GRIFFITH (a TURNER CO 



WILSON 



FAMILY GRIST MILL 



This mill is especially made for 

 grinding Graham Flour or Corn- 

 meal; can be adjusted for cracking 

 grain if desired. Weight, 30 lbs. 

 Price, $4.00. With Iron Stand, Price, 

 $6.00. Weight, 65 lbs.; diameter of 

 hand wheel, 20 inches. 



WILSON N0.1 BONE 

 AND SHELL MILL 



No. 1 — Grinds oyster or clam 

 shells and dried bones, and is an 

 excellent mill and largely used. 



Will also grind corn. 

 Weight, without stand, 33 lbs.$4.00 

 Weight, with stand, C4 lbs... 6.00 



0. D. GRINDING MILL 



Capacity 1 to 2 bushels per 

 hour, as the mill may be set 

 fine or coarse. Note flat con- 

 struction of balance wheel. 



May be adjusted for meal or 

 only cracking the grain. 



No. 1 P. W. Ply Wheel, list 

 Price, $4.50; Our Special Price, 

 $2.75. 



No. 1 C. with crank only, less 

 fly wheel, list Price, $3.20; 

 Our Special Price, $2.00. 



BLACK HAWK FEED 

 AND GRIST MILL 



Just the thing for crack- 

 ing corn, etc., for poultry. 

 Makes best Graham flour 

 and meal for table use. 



C-rinds corn, wheat, rye, 

 rice, spices, etc. Weig'ht, 

 17 pounds. Price $3.00 



RED CHIEF GRINDING 



No. 2 



ITo. 1 — For Small Poultry 



Raisers. Price $ 2.50 



No. 2 — Best Crank Mill 

 on Earth. Feed gauge to 



regulate grinding. Price.... 3.00 



No. 5 — With large capac- 

 ity, feed gauge and fly wheel. 



Clamps to box. Price 4.00 



No. 10 — With feed gauge, 

 fly wheel and handsome 

 stand to screw on table. 



Price 5.00 



No. 12 — Best Hand 

 Mill on Earth; bronze 

 boxes, steel axle, large 

 fly wheel. Price 10.00 



No. 15 — Power Mill 

 for one-horse engine; 

 strong, durable and 

 easy running. Price.. 10.00 



:n bone gutter 



I7o. 5EM. 



IiATEST mODEl. 



The feed is both automatic and self-governing. Cuts all 

 gristle and meat. Nothing escapes uncut. 



No. 5C. — This machine is ex- 

 actly the same as the No. 5B, 

 with a crank handle instead of a 

 balance wheel. Capacity not quite 

 equal to 5B. Weight, 35 lbs. $6.00. 



No. 5B. — This machine is ex- 

 actly the same as the No. 5BM, 

 except that it has not the iron 

 stand. The capacity is the same. 

 Weight, 60 lbs. $8.00. 



No. 5BM. — Intended for flocks 

 of 15 to 25 hens. Mounted on iron 

 stand. Cylinder 6 inches diameter, 

 4 inches deep. Cutter plate has 4 

 knives instead of 3. $10.40. 



No. 7. — Intended for flocks of 

 40 to 100 hens. Mounted on strong 

 iron stand with large table for 

 box or pan to receive cut bone. 

 Weight, 107 lbs. Cylinder, 7% in. 

 in diameter, 5^4 in. deep. Capac- 

 ity, % to 1 lb. per minute. $12.00. 



No. 11. — Intended for large flocks 

 of over 100 fowls. Capacity 100 

 lbs. per hour. Horse-power re- 

 , ^ quired, 1 to IVs. Weight, 215 lbs. 



Diameter of pulley, 15 inches; 3y2-inch face; speed of pulley, 

 300 to 350 revolutions per minute. Capacity, 100 lbs. and up- 

 ward per hour. $26.00. 



HUMPHREY GREEN BONE AND VEGE- 

 TABLE GUTTER 



The knives of the Hum- 

 phrey Cutter act upon the 

 shear principle, producing 

 rranulated cutting. No. 

 2% is the same machine as 

 ilo. 2, with the addition of 

 a hand wheel, making it 

 both a hand and power 

 machine. 



No. 1 — Hand Power.$12.00 

 No. 2 — Semi-pov/er. 13.50 

 No. 2% — Hand and 



Power 15.00 



No. 6 — Direct Power 22.00 



POULTRY^AN'S 

 CLOVER CUTTER 



Designed for cutting, either 

 green or dry, such growths as 

 clover, alfalfa, vegetable tops, 

 etc. These growths are the 

 cheapest and most productive 

 egg-forming poultry foods for 

 cold weather. 

 With four 7-in. knives; 



weight K. D., 60 lbs $8.50 



Red Chief Grinding Mill 



No. 20 



COIVIBINED HAND AND POWER MIIiXi. 



No. 20. — Power Mill for two-horse engine; 

 tight and loose pulley, best of bronze 

 boxes and cold rolled steel axle, capacity 

 10 to 20 bushels per hour. Has no equal. 

 Price $15.00. 



Corn Sheller Attachment, shells the corn 

 and grinds at the same time. 

 Price extra $6.00. 



Table Meal Separator, makes flne table 

 meal while grinding stock feed. 

 Price extra $5.00. 



All burrs are as hard as can be made, 

 and all of our mills will grind in a satis- 

 factory manner dry bone, oyster shells, 

 old china, etc. New Feed Gauge enables 

 the operator to grind fine withont mill 

 turning hard. New Burrs will grind fine 

 and quick. 



