GRIFFITH ®, TURNER CO 



MODERN ONE-HORSE DRILL, 5 DISKS 



SHAFTS HINCED-NO WEIGHT ON THE HORSE 



out? 



WHEELS 

 CADDY 

 TME 

 LOAD 



Just the thing for the Farmer, Truck Farmer and Gardener. 

 Cups are fitted for sowing peas, beans, ensilage, corn and 

 sugar beet seed, as well as wheat, rye, flax and oats. 



With the disks set 7 inches apart, the distance between 

 outside disks is only 28 inches (or 8 inches apart is 32 inches), 

 so that the drill will safely pass between corn rows 36 inches 

 or wider apart. List Our Special 



Price. Price. 



Price, with Big'ld Prame $41.60 $33.25 



Extra for Truck Wheel 3.00 2.40 



rertilizer Attachment Extra 9.00 7.20 



Grass Seeder Attachment Extra 4.50 3.60 



Extra for Oat Agitator 2.00 1.60 



Extra for Widening' and Narrowing' Iiever. . 2.00 1.60 



GRAIN DRILL TUBES 



Galv. Conductor. 

 IN OBBEBINCt tubes it is always best to send an old 

 tube as a sample. If that cannot be done, be sure to state 

 name of Drill, the kind of Tube, whether ringr flange or plain 

 top, or special hell-shaped top with straps, and by all means 

 the length and diameter at top and bottom. 



Plain Tubes, each 25c. 



Bell Top Tubes, with strap, each 35c. 



Flat or Ring Flange Tubes, each 30c. 



Galvanized Conductors, each 40c. 



GRAIN DRILL POINTS 



We are one of the largest distributers of 

 GRAIN SBIIii; POINTS AND TUBES 



in the Country. 

 Tor All the Iieading Grain Drills. 

 IN ORDERING POINTS, either send an 

 old one or give name of Drill, length of 

 point, and be sure to give distance from 

 center of hole to end of point. It is always 

 best, if possible, to send an old sample. 

 Price, Points, each 10c. 



ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE 



GRAIN AND FERTILIZER DRILL 



Both the grain and fertilizer are positive force feeds, and 

 will sow with absolute regularity any kind of grain, or ferti- 

 lizer in good condition. The grass seeder is also a force feed, 

 and can be used either in front or rear of the hoes; also quan- 

 tity can be changed to any amount necessary. It is fastened 

 on the frame, and very low down, thus preventing the wind 

 from blowing the seed away before reaching the ground. The 

 fertilizer feed can be stopped or started at any time while the 

 drill is in motion, which makes it convenient in case the oper- 

 ator does not wish to sow fertilizer while going over the 

 ground. 



8- Hoe Pin $68.75 



9- Hoe Pin 73.00 



10- Hoe Pin 78.00 



11- Hoe Pin 82.50 



8- Hoe Spring 71.00 



9 - Hoe Spring 76.00 



10- Hoe Spring 81.00 



11- Hoe Spring 85.50 



8- Disk Drill 74.25 



9 - Disk Drill 79.00 



10- Disk Drill 84.25 



11- Disk Drill 89.00 



MOON" ROLLING COULTER 



This handy tool is 

 a great convenience, 

 both m the home gar- 

 den and on the large 

 truck farm. Depth Of 

 cultivation easily reg- 

 ulated. The disks 

 make it possible to 

 cultivate up close to 

 the plants. 



$5.00 



