204 ^ GRIFFITH ®, TURNER CO >^ 



GOULDS PYRAMID POWER PUMP 



A pump of high efficiency for use 

 •where water is not more than 22 feet 

 below pump. The gearing is machine 



cut of hard cast iron; the crankshaft 

 is of high carbon open-hearth steel; 

 the bearings are lined with best-grade 



babbitt metal; cylinder is best quality 



hydraulic iron fitted with brass lining; 

 the valves are rubber-disk type on 

 bronze seats, convenient to get to. 

 Size 2%x4, suction and 



discharge IM in., capac- 

 ity 408 gal. per hour. 



List, $40.00. Our Price, 



$32.00. 



Size 3x5, suction and 



discharge 1% in.. 280 



lbs., 720 gal. per hour. 



List, $55.00. Our Pt;ice, 



$45.00. 



Size 4x5, suction and 



discharge 2 in., 325 



lbs., 1260 gal. per hour. 



List, $65.00. Our Price, 



$52.50. 



Air Attachment for either — List 

 $15.00. Our Price, $12.00. 



Special circular and prices <it 

 larger sizes on application. 



Back-Geared 

 5-1. 

 Pulleys 



21/2x4 

 T. & L. 

 3x5—15" 

 T. & L. 

 . 4x5 — 15" 

 T. & L. 



No. 

 1139 

 1141 

 1143 



Cylinder and 



Elevation 

 3-in. — 150 feet. 

 5-in.— 150 feet. 

 8-in. — 100 feet. 



BUCKEYE POWER 

 WORKING HEADS 



The Buckeye Power Work- 

 ing Heads are built in three 

 sizes, and are carefully de- 

 signed to meet the require- 

 ments of deep well pumping. 



In addition to lifting the 

 water from the well, they are 

 capable of forcing the water 

 to an elevated tank or reser- 

 voir at any ordinary height 

 above the pump. 



Especial attention is called 

 to the arrangement of the 

 gear and pinion on these 

 pumps, which secures an al- 

 most vertical lift on the driv- 

 ing rods when the pump 

 plunger is on the up stroke, 

 bringing the wrist pins al- 

 most directly underneath the 

 cross-head when the pump is 

 required to perform its heavi- 

 est work. 



The cross-heads and guides 

 are unusually well con- 

 structed, and prevent entirely 

 the wear of the piston rod in 

 the packing box of the pump. 



The frames of these pumps 

 are of the angle-corner type, 

 tapering in the line of the belt 

 pull from the base, and by 

 disconnecting the piston rod 

 just above the packing nut, 

 and removing the four cap 

 screws which attach the 

 frame to the base, the body of 

 the pump can be hinged out of 

 the way when removing the 

 nlunger rod and valves from 

 the well. 



With air chamber and 

 Size Size differential plunger 

 Stroke Pulleys Iiist Price Our Price. 



71/2, 10 20x4 in. - $ 80.00 $ 56.00 

 10, 12 20x4 in. 104.00 72.80 

 16, 20 30x6 in. 196.00 137.20 



ELECTRIC DEEP-WELL PUMPING HEAD 



This is a moderate- 

 priced deep-well elec- 

 tric working head for 

 moderate require- 

 ments. Its construc- 

 tion combines the best 

 of materials and ex- 

 cellent design and 

 workmanship; has ac- 

 curate machine - cut 

 gearings, and very 

 long shaft bearings; 

 all gears have shields 

 or covers. 



A 2-in. single-acting 

 cylinder against a 

 total lift and force of 

 180 feet. 



A 2 1/2 -in. single-act- 

 ing cylinder against a 

 total lift and force of 

 125 feet. 



A 3-in. single-acting 

 cylinder against a to- 

 tal lift and force of 

 90 feet. 



The length of stroke 

 is 6 in. It is tapped 

 to take any size suc- 

 tion pipe up to 3 in,; 

 weight, 500 pounds; 

 size of motor, one-half 

 H. P.; capacity from 

 240 gallons to 550 gal- 

 lons per hour, depend- 

 ing upon the size of 

 cylinder vsed. 



Price, wi;H 110 or 

 220-volt allernating- 

 current motor — List, 

 $190.00; Our Price, 

 $135.00. 



Add for air pump 

 attachment to List, 

 $10.00; to Our Price, 

 $8.00. 



(FIG. 47E) 



FIG. 45 E ELECTRIC 

 HOUSE PUMP 



For pumping from shallow wells, 

 cisterns, or springs. Will forco 

 water to a height of 100 feet or 

 less against a pressure of 50 lbs.; 

 therefore can be used in connec- 

 tion with either open attic tanks 

 or basement pressure tanks. The 

 machine is no plaything, nor a 

 flimsy affair, but is high class in 

 all particulars. The gearing Is 

 machine cut and of ample dimen- 

 sions. The cylinder is of brass, 

 with brass valves and piston rod. 

 Gears are shielded, as shown in 

 illustration. Capacity, per hour, 

 150 gallons. Price, with 110 or 220- 

 volt A. C. Motor List, $104.00. 



Our Price, $75.00. 



If air chamber is not wanted, deduct from List, $5.00; from 

 Our Price, $3.50. 



Prices on these heads, with iron sub-Dase and with pinion 

 and g'ear for motor quoted on application . 



AUTOMATIC PRESSURE 

 TANK SWITCH 



(FIG. 44) 



For controlling pres- 

 sure in pneumatic 

 tanks. Will control a 

 variation of about 15 

 pounds in water pres- 

 sure; that is, it can be 

 set to throw out at 50 

 pounds and start the 

 motor again when the 

 pressure has gone 

 down to 35 pounds. 

 Not designed for pres- 

 sure of over 75 lbs. 

 List price of switch as 

 shown in cut, $38.50; 

 Our Price, $30.00. 



