GASOLINE ENGINE, FEED AND ENSILAGE CUTTERS. 9fe 



THE "NEW WAY" AIR-COOLED ENGINES are built in 2y 2 , 

 i l A, 4)/2 and 6 h. p. single cylinder, and in 8 and 12 h. p. double cylinder. 

 AIR-COOLED. — Xo water, no freezing; cooling absolutely guaranteed. 

 DUST-PROOF. — All parts encased and run in oil. 



LUBRICATION. — Automatic; force feed from one lubricator only; 

 "positive." 



BALANCING. — Mechanical; vibration cut down to minimum; no wear 

 and tear. 



CARBURETOR. — Patented; no needle valve, no gasoline pump. 

 CYLINDER. — One-piece casting. No packed joints to blow out. 

 VALVES. — Instantly removable. No adjustments disturbed to remove 

 them. 



IGNITION. — Jump spark, same as used on automobiles and aeroplanes, 

 on account of its reliability. Also furnished with Bosch High-Tension 

 Magneto. 



The engine with the troublesome parts left off. 

 Let us name you prices. 



"Ohio" Standard Feed 

 and Ensilage Cutter 



Hand and Power Machines 



The No. 11 "Ohio" Standard Feed and Ensilage 

 Cutter, illustrated on this page, is similar in de- 

 sign to the No. 9, with the exception that the 

 knives are longer, and the knife shaft extends 

 through on both sides for the fly-wheel and pulley 

 to better adapt the machine to power. The crank 

 furnished fits directly onto the cylinder shaft, so 

 that the hand drive "s direct. The construction is 

 identically in principle with that in the large- 

 sizes of Ohio Cutters. The safety fly-wheel, ad- 

 justable knives, and patented gear are on these 

 machines, which makes them durable, light run- 

 ning and practical. 



The capacity of the No. 9, operated by hand, 

 is 50 to 60 bushels of hay straw, corn stalks and 

 rough feed of every kind; and 1,500 to 2,000 

 pounds per hour when driven by power, one-horse 

 actual power being sufficient. Four lengths of 

 cut, two or four knives. Weiarht, 400 lbs. ; speed, 

 -100 to 600. 



The capacity of the No. 11 cutting dry feed is 

 2.500 to 3,000 lbs. per hour; of ensilage, three to 

 fDur tons per hour. Speed, 400 to 600; power, 

 one to two horse. 



Pulley, 12 inches by 4-inch face; 6, 8, 10 and 

 15-inch sent if desired. 



No. 9, weight, 390 lbs., 2 knives $26.00 



No. 11, weight, 420 lbs., 2 knives 30. CO 



Figs. 784, No. 11. 

 No. 9 weight 390 lbs, 4 knives. 

 No. 11, weight 420 lbs, 4 knives. 



$30.00 

 34.00 



A Catalogue of Chio Sila£e Cutters mailed on request. 



American Clipper Wood Saw No. 4 



WITH EXTENSION TABLE FOR POLES OR COR D WOOD. 



The illustration is that of the Clipper Wood Frame Pole 

 Saw for sawing all kinds of timber, both long and short. 

 The construction of same is the very best. The lumber used 

 is hardwood and good size, not frail in any particular. The 

 bearings are all babbitted. The arbor is extra large, size 

 1 7-16 inches, and has heavy fly-wheel. Frame is not nailed 

 together, but mortised and tennoned and bolted. They are 

 as good as the best and better than the majority of others. 

 Swinging table is balanced, so as not to consume all the 

 strength of the operator in bringing the timber to the saw- 

 blade. This line of Wood Saws has all the features that 

 others have, together with valuable points lacking on others. 

 There is no reason to hesitate about buying the Clipper 

 Wood Frame Saws. They will fill the requirements in every 

 way. Weight, 330 pounds. Furnished regularlv with 22- 

 inch blade. Larger blades — namely 24, 26, and 28-inch — 

 furnished at extra price. 



Wood frame Pole Saw complete with 22-inch blade $28.00 



Extra for larger Saw Blades. Wood Frame Pole Saw. 



57 



