g g GRIFFITH <a TURNER COj^ 83 



ALWAYS ORDER BY FIGURE AND NUMBER WHERE GIVEN 



THE MYERS POWER SPRAY GUN 



LENGTH OVER ALL, 26 INCHES. 



"Utilizes the Entire Capacity of any Power Spray Pump and 

 Does Away "With All Bamboo Extensions, Nozzles 

 and Fittings. 



All Working Parts on the Outside. Not Subject to Corrosion. 

 Fig. 1824 



Pitted for ?4 -inch Hose Coupling" and -inch Pipe. 



Fig. 1824 illustrates the Myers Power Spray Gun designed 

 for use with any Power Spray Pump. Its capacity is only 

 limited by the quantity of material discharged by the pump. 



The idea is to enable one man to do the spraying, thus sav- 

 ing the expense of two extra men as is the case with the 

 ordinary spray rig using two lines of hose with bamboo ex- 

 tensions. 



By a one-third turn of the handle the spray can be adjusted 

 from a long distance spray reaching the top of the tree to an 

 extremely broad spray sufficient to cover the entire tree or 

 shut off entirely. 



It is furnished with four separate spray discs designed to 

 deliver the entire capacity of the pump, either 4, 6, 8 or 10 

 gallons per minute. 



One-third turn of the handle adjusts the spray from a wide 

 open nozzle to a complete shut-off of the mixture. 



LIST PRICE, 516.00. OUR SPECIAL PRICE, $10.00. 



Pig. 468 Pat. Pending. 



This pump is the ideal all-purpose hand sprayer. Its field 

 is practically unlimited, as it may be used for spraying trees, 

 vines, garden truck, potatoes and any field crops. It also can 

 be used for handling whitewash, disinfectants, etc. 



It is made entirely of brass, doing away with all danger of 

 corrosin. All of the parts are made on screw machine and 

 for that reason are interchangeable. 



The pump is double-acting. This feature makes the spray 

 continuous. Anyone who has used a single acting pump of 

 this kind will immediately recognize the advantage in a pump 

 that works on both the up and down stroke. 



The pump cylinder is small in diameter and for that reason 

 the operator can generate a high pressure with little labor. 

 In an actual test this pump generated a pressure of 180 lbs. 

 per square inch with ordinary effort. 



The pump itself is so constructed that it can be taken apart. 



LIST PRICE, $8.40. 



OUR SPECIAL PRICE, $5.50. 



Pig 

 1506 



Improved "MONARCH" 

 Two-Cylinder Spray Pump 



Vertical Outside Packed, Bronze Plungers, 

 Bronze Glands, Valves, Etc. 



High-Grade Sprayer for Orchard "Work. 

 Also for Whitewashing. 



Pig. 1506 — Has two bronze plungers oper- 

 ating in two vertical cylinders, which are 

 packed with a material unaffected by spray- 

 ing solutions. This construction permits all 

 gritty particles to pass through valves and 

 out; does not grind the cylinder. Ports 

 are large and direct. Valves are bronze, 

 ground to fit their bronze seats, are acces- § 

 sible through hand-holes. This is the easi- /^Ev 3t 



est operated Pump of its capacity on the M 



market. Diameter of Cylinder, 2 inches; 

 Suction Hose, ? 4 in.; Discharge Hose, y 2 in. 



List. 

 Price. 



Pig. 1506 — Pump only with Suction Strainer and 

 Hose Coupling $77.60 



Pig. 1506. Outfit A — This outfit includes Pump, 

 Suction Strainer, one Mistry, Jr., Nozzle, Hose 

 Bands and Couplings for one lead, but without 

 Hose 



Fig. 1506. Outfit B — This outfit includes Pump, 

 Suction Strainer, two Mistry, Jr., Nozzles, Hose 

 Bands and Couplings for two leads, but without 

 Hose 



Pig. 1506. Outfit C — This outfit is the same as 

 Outfit A, except with one 15-foot lead of No. 1 

 %-inch Discharge Hose and 5 feet %-inch Suc- 

 tion Hose 90.30 



Pig. 1506. Outfit D — This outfit is the same as 

 Outfit B, except with two 15-foot leads No. 1 

 y 2 -inch Discharge Hose and 5 feet %-inch Suc- 

 tion Hose 



Pig. 1506. Outfit C2 — This outfit is the same as 

 Outfit A, except with one 15-foot lead No. 2 

 Wire Wound Vi-inch Discharge Hose and 5 feet 

 %-inch Suction Hose 92.00 



Fig. 1506. Outfit D2 — This outfit is the same as 

 Outfit B, except with two* 15-foot leads No. 2 

 Wire Wound %-inch Discharge Hose and 5 feet 

 %-inch Suction Hose 103.49 



If Pressure Gauge is wanted, add 5.00 



$49.50 



81.90 51.00 



85.24 53.00 



55.80 



99.04 60.75 



56.55 



62.25 

 3.00 



GOULD'S "STURDY 



Duplex Power SPRAYER, 

 with Worm Gear for Direct 

 Connection to Engine Shaft 



The Gould's new "Sturdy" is a high-grade, two-cylinder, single-acting power spray pump, 

 provided with a worm gear so it can be coupled directly to the engine shaft. No jack or 

 extra gearing is necessary. 



The gear ratio is 8% to 1, and the pump is, therefore, suitable for direct connection to 

 engines with speeds of 400 to 600 revolutions per minute. At 50 revolutions per minute the 

 pump has a capacity of 3.40 gallons per minute; at 60 revolutions, 4 gallons, and at 75 revo- 

 lutions, 5 gallons per minute. It is good for pressures up to 250 pounds. The plungers are 

 heavy drawn brass tubing, outside packed. They are 2 inches in diameter, with a stroke of 

 2% inches. The connecting rods are malleable iron. The shaft is steel, and a steel ball 

 thrust bearing is provided to take up the end thrust. The valves and bevel seats are cast 

 bronze. The suction is for 1-inch pipe or hose and the discharges are for %- or %-in. hose. 



All gears are completely enclosed, thus reducing danger of breakage and preventing wear 

 from foreign particles. The air chamber is large, enabling a uniform high pressure to be 

 maintained, and is cored to allow the driving shaft to extend through far enough to operate 

 an agitator. The agitator can be either direct connected or driven by chain and sprocket. 

 The crank pins are extended through the connecting rods to allow for operating a reciprocat- 

 ing agitator. A special flexible coupling is furnished with the pump for connection to the 

 engine. This allows the pump to be operated even when it is not in perfect alignment with 

 the engine shaft. The cylinders and valve boxes are cast separate, making replacements 

 easy whenever repairs are necessary. The valve box covers are held in place by a single 

 bolt, making the valves easily accessible. A drain plug is located at the base to permit the 

 pump to be cleaned out occasionally, and to be drained when not in use. The pump is very 

 compact: the width over all is 14% inches; the height 19% inches, and the length to the end 

 of the shaft is lSVo inches. 



THE "STURDY" 

 Fig. 1631 



1631 — With Flexible Coupling. 



Pump with 

 Strainer and Hose 

 Couplings 



CYLINDERS 



SUCTION 



DOUBLE 

 DISCHARGE 



*Regularlv furnished 

 with flexible coupling 



APPROX. 

 WT. LBS. 



LIST PRICE 



OUR SPECIAL 

 PRICE 



Diam. 1 Stroke 



2 ins. 1 2*<i ins. 



1 in. Hose 



Ms in. Hose 



120 



$132.00 



$82.50 



$126.25 



OUTFIT S. 



Pump with flexible coupling, pressure gauge, water relief valve 10 ft. 1 in. rubber suctioD 

 hose and strainer, Fig. 70%, 4 7/16 in. diameter; two 25-ft. lengths of %-in. discharge 

 hose and couplings ; two brass Y connections and four "Mistry, Jr.." nozzles with fine discs. 



$202.00 



Additional suction and discharge hose furnished at extra cost, if ordered. 

 ♦When pump is to be direct connected to engine, the diameter of the engine shaft should be given when ordering pump. 

 Pulley furnished instead of flexible coupling, if ordered, at extra cost, depending on size. 



ALL PRICES IN CATALOG SUBJECT TO CHANGE WITHOUT NOTICE. 



