134 



§S GRIFFITH ®. TURNER GO 9g 



HAND LAWN ROLLER 



(CAST IRON.) 



These rollers are especially desirable; they will not dent; 

 wet grass and dirt does not cling to them, owing to their 

 highly polished surface. Have counterbalance, which holds 

 up the handle and makes it easy to push. 



o 



4 or 504 

 6 or 507 

 9 or 509 



No. Sec. 



Width Pace 



Diam. Sec. 



Total 

 Length. 



Weight. 



Our Special 

 Price. 



2 



10 in. 



20 in. 



20 in. 



250 lbs. 



$23.25 



2 



10 in. 



20 in. 



24 in. 



300 lbs. 



27.75 



2 



10 in. 



24 in. 



20 in. 



400 lbs. 



36.75 



STEEL LAND ROLLERS 



IALLAST 

 LAWN ROLLER 



No-Tip attachment 

 holds handle upright 

 when not in use. 



This roller can be 

 filled with water to 

 any desired weight. It 

 can thus be regulated 

 to suit soft turf, firm 

 lawns or driveway, 

 tennis court, etc. It 

 can be emptied for 

 storing away, making- 

 it light and easy to 

 handle. The drum is 

 high carbon steel with 

 all seams electric 

 welded. Edges are 

 rounded back to pre- 

 vent cutting of lawns, 

 courts, etc. 



The axle is mounted 

 on roller bearings, 

 making the roller run 

 very easily. 



•a 

 6 



1824 or 602 

 2424 or 603 

 2430 or 604 



S2 



Sa 



18 in. 

 24 in. 

 24 in. 



24 in. 

 24 in. 

 32 in. 



J5 >> 



80 lbs. 

 115 lbs. 

 130 lbs. 



~£ . 



310 lbs. 

 500 lbs. 

 650 lbs. 



Pi 



$15.60 

 20.40 

 22.80 



HORSE LAWN ROLLER 



GRITGO-D ONE HORSE 

 LAWN ROLLER 



Shafts are 

 made very sub- 

 stantial and 

 well braced. 

 Double - leaf 

 spring seat, 

 therefore less 

 jar than on 

 other lawn rollers. Remov- 

 able self-oiling bearings. 

 Axle 1%-inch diameter. Can 

 be weighted to any desired 

 weight. Just the thing for 

 small farms, lawns and 

 truck farms. 



Length, 

 Feet. 



4 



Diameter, 

 Inches. 

 26 



No. of 



Sections. 



2 



Our Special 

 Price. 

 $37.50 



The above cut represents our Three-Section jLand Boiler. Heretofore attempts have been made to construct an all-steel 

 roller, with the result that the steel brackets employed in this construction invariably allowed the rolls to get out of align- 

 ment, thus quickly wearing out the boxes. To avoid this tendency, we have substituted heavy iron brackets to support the 

 bearings and which entirely surrounds them. This construction insures true alignment and eliminates constant expenditures 

 for repairs and replacing boxes. An additional feature of this roller is the blocking in of the frame under the pole with a 

 4-inch hard wood block. This construction gives the roller perfect rigidity and absolutely springing of the steel frame when 

 turning around, crossing dead furrows, etc. It is further braced with steel braces from the frame to the pole, which not only 

 adds strength to the roller, but prevents breaking of the pole. 



The Drums are 24 inches in diameter, made from extra heave hard steel sheets and are not easily indented. The ends 

 are made from pressed steel and fitted with heavy cast bearings which allows each roll to turn independently. 



The shaft is 1%-inch high carbon steel. 



Sections Length Diameter Weight Our Special 



lbs. Price 

 550 $42.50 

 585 45.00 



Length 

 feet 



Diameter 

 inches 



2 8 24 



3 8 24 

 Price does not include Doubletrees and Neck Yoke. 

 Doubletrees and Neck Yoke 



5-00 



All PRICES IN CATALOG SUBJECT TO CHANGE WITHOUT NOTICE. 



