£J0 



E 



This screw plate is made especially for the farmer. 

 It is made from the best material, and will be found 

 one of the handiest tools on the farm. All bolts that 

 have become bruised can be rethreaded in a minute, 

 and save lots of time and worry. Can also be used 

 for threading- iron rods, which may lee used for many 

 purposes. The sizes run % in., 5-16 in., % in., x h in. 

 and % in. These are the sizes generally used. Taps 

 and dies are both included in the price, and the whole 

 outfit is packed in a nice wooden bor, 



Price '. $15.00 



LUTHER POST 

 DRILL 



Luther Post Drills have the feature of 

 higher-priced drills. The frame is built 

 solid, and is well braced. It may be 

 bolted or screwed to a post or an up- 

 right, and holds any ordinary Bit Stock 

 Drill. The work is fed by a hand screw 

 at the top, and can be adjusted to suit 

 the quality of work in hand. When a 

 hole is to be bored in any material, it is 

 very handy to have one of these drills 

 at hand, as it avoids many hours' delay, 

 if you had to carry the work to a repair 

 shop. The size of the work which these 

 drills are capable of doing is altogether 

 according to the hardness of the ma- 

 terial which is being bored and the 

 strength of the person doing the work. 



Price $6.00. 



SILVER & DEMINR DRILLS 



HO. 112. SHORT LENGTH. 



Fitting Bovnton & Plumer and Silver & Deming 

 Blacksmith's Drill Presses, Nos. 1 i\nd 2, with shanks 

 %-inch diameter. 





Length, 



Retail, 







Length, 



Retail,. 



Diam. 



in. 



Pr. ea. 



Diam. 



in. 



Pr. ea. 



1-8 



4% 



$0.45 





13-16 



6 



$1.35 



5-32 



4% 



.48 





27-32 



6 



1.4a 



3-16 



5% 



.50 





7-8 



6 



1.45 



7-32 



5% 



.55 





29-32 



6 



1.50 



1-4 



6 



.60 





15-16 



6 



1.60 



9-32 



6 



.65 





31-32 



6 



1.7a 



5-16 



6 



.70 



1 





6 



l.sa 



11-32 



6 



.73 



1 



1-32 



6 



1.90 



3-8 



6 



.75 



1 



1-16 



6 



2.00 



13-32 



6 



.78 



1 



3-32 



6 



2.10 



7-16 



- 6 



.80 



1 



1-8 



6 



2.20 



15-32 



6 



.83 



1 



5-32 



6 



2.25 



1-2 



6 



.85 



1 



3-16 



6 



2.3a 



17-32 



6 



.88 



1 



7-32 



6 



2.35 



9-16 



6 



.90 



1 



1-4 



6 



2.4a 



19-32 



6 



.95 



1 



9-32 



6 



2.5a 



5-8 



6 



1.05 



1 



5-16 



6 



2.60 



21-32 



6 



1.10 



1 



11-32 



6 



2.7a 



11-16 



6 



1.15 



1 



3-8 



6 



2.80 



23-32 



6 



1.20 



1 



13-32 



6 



2.9a 



3-4 



6 



1.25 



1 



7-16 



6 



3.00 



25-32 



6 



1.30 



1 



15-32 



6 



3.10 







1 



1-2 



6 



3.20 



The above drills have shanks 2% inches long and 

 » inch diameter. 



m MACHINE 

 U BOLTS 



HH 



1% 



2 



2y 2 



3 



3y 2 



4 



4V 2 

 5 



5% 

 6 



6y 2 



7 



7% 



8 



9 

 10 

 11 

 12 

 13 

 14 

 15 

 16 

 17 

 18 

 19 

 20 



03 o 



3S 



y* 



$1.70 

 1.78 

 1.86 

 1.94 

 2.02 

 2.10 

 2.18 

 2.26 

 2.34 

 2.42 

 2.50 

 2.58 

 2.66 

 2.74 

 2.90 

 3.06 

 3.20 

 3.38 



$.03 

 .03 

 .03 

 03 

 .03 

 .03 

 .04 

 .04 

 .04 

 .04 

 .04 

 .04 

 .04 

 .05 

 .05 

 .05 

 .05 

 .05 



■J 3 



5/16 



$2.00 

 2.12 

 2.24 

 2.36 

 2.48 

 2.60 

 2. 

 2.84 

 2.96 

 3.08 

 3.20 

 3.32 

 3.44 

 3.56 

 3.80 

 4.04 

 4.28 

 4.52 



<D aj 

 PiH 



$.03 

 .03 

 .03 

 .03 

 .03 

 .03 

 .04 

 .04 

 .04 

 .04 

 .04 

 .04 

 .04 

 .05 

 .05 

 .05 

 .05 

 .05 



a o3 



Por Other 

 Sizes Write 

 for Prices. 



$2.40 

 2.56 

 2.72 

 2.88 

 3.04 

 3.20 

 3.36 

 3.52 

 3.68 

 3.84 

 4.00 

 4.16 

 4.32 

 4.48 

 4.80 

 5.12 

 5.44 

 5.76 

 6.08 

 6.40 

 6.72 

 7.04 



5.03 

 .03 

 .03 

 .01 

 .04 

 .04 

 .05 

 .05 

 .05 

 .05 

 .or, 



.05 

 .05 

 .Of, 

 .06 

 .06| 

 .061 

 .06 

 .06 



$3.60 

 3.86 

 4.12 

 4.38 

 4.64 

 4.90 

 5.16 

 5.42 

 5.68 

 5.94 

 6.20 

 6.46 

 6.72 

 6.98 

 7.50 

 8.02 

 8.54 

 9.06 

 9.58 



Por Plow Bolts See 

 Page 149. 



I I 



.06110.10 

 .06110.62 

 .06111.14 

 111.66 

 112.18 

 112.70 

 113.22 



IS d 



turn 



.04 

 .04 

 .05 

 .05 

 .05 

 .05 

 .06 

 .06 

 .06 

 .06 

 .07 

 .07 

 .07 

 .07 

 .07 

 .07 

 .07 

 .08 

 .10 

 .10 

 .12 

 .12 

 .12 

 .15 

 .15 

 .15 



CARRIAGE 

 BOLTS 



J3 oi 

 &2 



1% 



2 



2% 

 3 



3% 

 4 



4% 

 5 



5% 

 6 



6% 

 7 



7% 

 8 



8% 

 9 



9% 

 10 

 11 

 12 



$1.00 

 1.08 

 1.16 

 1.24 

 1.32 

 1.40 

 1.48 

 1.56 

 1.64 

 1.72 

 1.80 

 1.88 

 1.96 

 2.04 

 2.121 

 2.20 

 2.28 

 2.36 

 2.52 



x a 

 6fH 



wo 



as 



P5H 



$1.90 

 2.06 

 2.22 

 2.38 

 2.54 

 2.70 

 2.86 

 3.02 

 3.18 

 3.34 

 3.50 

 3.66 

 3.82 

 3.98 

 4.14 

 4.30 

 4.46 

 4.62 

 4.94 



5/16 



$1.40 

 1.52 

 1.64 

 1.76 

 1.88 

 2.00 

 2.12 

 2.24 

 2.36 

 2.48 

 2.60 

 2.72 

 2.84 

 2.96 

 3.08 

 3.20 

 3.32 

 3.44 

 3.68 



03 o 



as 



;.03 



.03 

 .03 

 .03 

 .03 

 .03 

 .04 

 .04 

 .04 

 .04 

 .04 

 .04 

 .04 



.or, 

 .or, 



.05 

 .05 

 .05 

 .05 

 .05 



$3.00 

 3.00 

 3.00 

 3.22 

 3.44 

 3.66 

 3.88 

 4.10 

 4.32 

 4.54 

 4.76 

 4.98 

 5.20 

 5.42 

 5.64 

 5.86 

 6.08 

 6.30 

 6.74 



:.04 

 .04 

 .05 

 .05 

 .05 

 .05 

 .06 

 .06 

 .06 

 .06 

 .07 

 .07 

 .07 

 .07 

 .07 

 .07 

 .07 

 .07 

 .07 

 .08 



All %-inch bolts are packed 100 in 

 are packed 50 in package. 



package. All 5/16-inch, %-inch and %-inch bolts 



BIT STOOK 

 DRILLS 



FOB METAL OB WOOD, No. 109. 





<B 



o J 



o 



Diameter. 



Retail Pri 

 Per Dozei 



Retail Pri 

 Bach, 



2-32 



$1.50 



$0.14 



3-32 



1.65 



.16 



4-32 



2.10 



.20 



5-32 



2.60 



.24 



6-32 



3.10 



.29 



7-32 



3.60 



.33 



8-32 



4.10 



.38 



9-32 



4.70 



.43 



10-32 



5.40 



.48 



11-32 



6.30 



.54 



12-32 



7.20 



.62 



13-32 



8.00 



.68 



15-32 



9.60 



.8* 



10-32 



10.30 



.87 



9-16 



14.35 



1.20 



5-8 



16.15 



1.35 



3-4 



19.75 



1.65 



These Drills will fit any brace on. 

 the market. "Will drill steel, iron or 

 other metals as well as wood. Will 

 bore any kind of wood without; 

 splitting. 



