ORCHARD CULTIVATORS 



62 



THE Planet Jr. Orchard Cultivator does rapid and thorough work and is strong and 

 well designed for either deep or wide cultivation. The standards take almost all 

 of the steels shown on a later page, and the tool works well under many varying 

 conditions. Being adjustable for width from a cut of four feet to six feet six inches, it 

 is admirable in large orchards, vineyards, hopyards and all broad cultivation. 



Two Wheel Fore-Carriage for Nos. 41, 42 and 46 Orchard 



Cuhivators 



In response to a demand for 

 a fore-carriage or truck we have 

 made one which fits the Nos. 



Weight, 80 lbs. 



Price, $9.00 



41 and 42 Cultivators, but a spe- 

 cial attachment will be required 

 for the No. 46. 



The truck has two 16-inch 

 electrically welded steel wheels 

 sixteen inches apart. They have 

 ten spokes with tires 2 inches 

 wide and ^ inch thick. The 

 wheels are mounted on a 1-inch 

 axle hinged in the center, so that 

 one wheel can go over an ob- 

 struction without raising the other 

 wheel off the ground. The sup- 

 port for this axle is pivoted- 

 and the double trees attached so 

 that the team will steer the truck 



without side 

 draft. There 



is a vertical adjustment of the double tree of about 8 inches. 

 The stub tongue takes the sam.e braces as the regular tongue on 

 the Nos. 41 and 42. 



ALFALFA STEELS, 1^ x 9 inches. Price, with bolt, 16 

 cents. Weight, 19 oz. 



It has been found necessary to renovate alfalfa fields to get 

 the best results. The ground often becomes hard and packed on 

 top, and needs to be loosened up. These steels are specially de- 

 signed for this work. They have a right angle section, enabling 

 them to break and stir the soil without turning it upside down 

 or tearing out the alfalfa roots injuriously. They are just what 

 are needed for easy renovation, and for hard ground. 



No. 42 



Improved Planet Jr. Orchard and Universal Cultivator 



Price, with extensions (13 



Price, without extensions (9 

 teeth), $42.00 



Packed weight, 424 lbs. 



With pair of one=tooth 

 tensions (11 teeth), $4 



teeth) and 2=horse hitch, 

 $52.00 



Packed weight, 530 lbs. 



Additional parts to make 4= 

 horse hitch, $5.50 extra 



This is a heavy, strong tool for two, three or four horses ; it cuts 7 feet 9 inches 

 with extensions, or 5 feet 3 inches without extensions ; the standards are high carbon 

 steel, XYz inches by H inch thick. It is a larger pattern of No. 41. In heavy ground 

 it requires four to six horses. Steel tongue. Steels are 2^ inches by 10 inches. 



The wheels can be set 47 or 55 inches apart. No. 42 takes the same extras as 

 No. 41. Irrigating Steels only, per set of four, $3.35. 



