69 



REPAIRS AND EXTRAS FOR HORSE TOOLS 



Bin. CULTIVATOR STEELS SHOVtL IMPROVED SHOVEL lOiN. CULTIVATOR STCELS HARftOlV RIDCINC STEELS 



f) .1 .rf:. iK^^ sweeps a^"-^ ifc 11, fi i 



rURROWER ^ V 



lllv WITH REN. Jl I" il^' 



Ik STEELS ^\ 



I2inT^^^ disc 



PUOWS OR MILLERS 



STEELS. We make a large variety of Planet Jr. steel shapes of high carbon steel, 

 all of our own special design. The above styles are much liked for working hard 

 ground and for tearing out quack and wire grass, and for deep cultivation. They fit 

 all Planet Jr. one and two-horse cultivators. For 1915 we can supply also some sizes 

 made from special soft center steel for sticky clay or waxy soils, as noted in price list 

 on page 72. Most of our steel shapes are covered by patents, and to enable customers 

 to be sure of getting the right thing instead of inferior imitations, we stamp the trade- 

 mark Planet Jr. on the back. See that you get them, for you need the best, and they 

 are the cheapest in the end, as they are always full length. 



CULTIVATOR STEELS. We make our regular cultivator steels of beveled 

 steel, which is twice as thick down the center where the wear comes as at the sides, 

 gradually tapering from one to the other. 



This new shape causes the points to remain strong and they 

 do not wear thin or into a notch at the point or bend as others do, 

 so they give much longer service. The^ 8=inch length is made in 

 five widths, and these fit all Planet Jr.^ Horse Hoes, Plain Culti- 

 vators, Pivot Wheel Cultivators and Orchard Cultivators. The 

 l}i and inches are for extra deep work; the 2% for general 

 work in heavy soils ; the 3-inch for light soil. This latter is the 

 size generally used on all one-horse machines, with a 4-inch on 

 the rear standard to fill up against the row and avoid an 

 open furrow there. The 10=inch length is also made 

 in five widths and fits all our two-horse cultivators ex- 

 cept No. 72, the narrowest being used for deep work, 

 the 2>:4-inch for general purposes, and the 3-inch and 4- 

 inch for light lands. All regular Planet Jr. Steels have 

 our patent bolt sleeves to prevent bolts from pulling 

 through. 



ALFALFA STEELS, lf^x9 inches. Price, with bolt, 16 cents. 



It has been found quite necessary to cultivate alfalfa for the same 

 reasons for which we cultivate many other crops and in order to get the 

 best results. The ground often becomes hard and packed on top, and needs 

 to be loosened up. These steels are specially designed to meet the needs 

 of this wjor-k. They are formed from a right angle section of steel, thus 

 enabling them to break and stir soil without turning it upside down or 

 tearing out the alfalfa roots injuriously. 



Section of Planet Jr. 

 Perfect Bevel Steel 

 Coltivator Steel 



