REPAIRS AND EXTRAS FOR HORSE TOOLS 70 



PATENT SWEEPS we make in two styles. 



REGULAR SWEEPS fit all one or two-horse culti- 

 vators, and are made to cut 8, 10, 12, 15, 18 or 24 inches. 

 Particularly pleasing to growers of cotton, corn, coffee, 

 sugar cane, etc., and in orange groves. They quickly 

 exterminate quack grass and Canada thistles. On one- 

 horse machines are generally used in sets of three (see 

 page 45), or a single sweep may be used on the middle 

 standard. The points adjust downwards, then being 

 valuable for "dirting cotton" and for hilling generally. 



IMPROVED FLAT SWEEPS. Made to cut 3, 5, 

 8, 10, 12, 15, 18 or 24 inches. These are flatter than 

 our regular sweeps and leave the ground more nearly level. 

 They are particularly "^adapted to sugar beet and bean 

 cultivation and- for level cultivation generally. They 

 will not fit our horse hoe side standards, but will fit 

 all other standards on that machine, and also all stand- 

 ards on two-horse cultivators. The '3-inch a"e used 



for deep tillage and the 

 wider sizes for shallower 

 work. 



FINGERED 

 SWEEP. This- cuts 14>^ 

 inches ; a great weed killer, it leaves the ground prac- 

 tically level. (See page 39.) Fits all our one and two- 

 horse cultivators. Used on horse hoes, rear standard 

 for level 

 work. 



O N E = 

 SIDED 

 SWEEPS. 



Made in four 

 sizes, 8, 9y2, 



11 and 14 inches. They are much liked for 

 bean culture, being used on the horse hoes 

 and cultivators, the short ends next to the 

 row, and generally with a regular sweep in 

 the center. 



PATENT FLAT HOE STEELS. There are two 

 sizes — 6-inch cut and 10-inch cut — and they are grow- 

 ing in popularity year by year for market garden, cot- 

 ton and corn cultivation and flat work generally. Horse 

 hoes equipped with thes^ hoes on the side standards and 

 a 10-inch or 12-inch sweep on the rear make an admir- 

 able combination. The hoes cut clean, like the hoe 

 steels on our hand machines, and are sure death to 

 weeds. They fit all our horse hoe side standards and 

 with a special standard can be used on our two-horse 

 cultivators. 



PATENT BEET HOE STEELS. These are made 

 in three sizes, cutting 5, 6 or 7 inches. They fit our 

 No. 3 and No. 53 Beet Cultivators and with special 

 standard our twelve-tooth harrows or horse hoes. They 

 are admirably designed and do beautiful work. They 

 are shaped so as to act perfectly as leaf guards and also 

 to work very close to the row at the surface while 

 curving away from the roots underneath. 



FOR 1915 WE MAKE the 7-inch size with a cut- 

 ting edge slanting five degrees more than the above style, 

 which are much liked in weedy crops. Both styles are 

 made of steel heavy enough to be forged out to a thin 

 edge when dull. 



