48 



G. EDWARD SCHULTZ, WASHINGTON, D. C. 



"THE GRAND MOWER" (Ball Bearing) 



This is a strictly high-grade Ball-Bearing Lawu 

 Mower, and I have no hesitation in recommend- 

 ing it. It is made of strictly first-grade material 

 throughout, and the workmanship and finish are 

 unsurpassed. It has large driving wheels (10 in- 

 ches high) thus insuring lightness of draft. The 

 large diameter revolving cutter makes it an ex- 

 ceptionally good high-grass Lawn Mower, and the 

 five blades insure fineness of cut. 



POINTS OF MERITS. 

 1, Large driving wheels — insuring lightness of 

 draft. 2. Large diameter revolving cutter— mnk- 

 ing it a good high-grass Lawn Mower. 3. Fire 

 blades in the revolving cutter — insuring fineness 

 of cut. 4, It has a %-inch solid steel shaft run- 

 ning entirely through the revolving cutter and 

 bearings. 5. Simple adjustment of the bearings; 

 one screw doing it all. 6. Locking device which 

 keeps the bearings properly adjusted, requiring no 

 attention from the operator. 7. The bottom knife 

 — the best made — equal to any edge tool. 8. The 

 material, workmanship and finish, and the ar- 

 rangement for mowing terraces. Price, 16-inch, 

 $9.50. 



"NEW DIAMOND" LAWN MOWER (Ball Bearing). I have endeavored, in placing this machine on 

 the market, to produce a strictly first-class, high- wheel, adjustable reel Laiwn Mower, and, after severe 

 test, it has been found satisfactory in every respect. It is very neat in appearance, light running, and al- 

 most noiseless in operation. It is built very strong and cannot be jarred out of adjustment. The casings 

 have long hubs, through which an 11-16 inch solid steel shaft is passed and secured by set screws. 14-in., 

 $6.50; 16-in., $7.00. 



"NEW NORKA" LAWN MOWER, 9-inch wheel. — The principle applied in the construction of this Mow- 

 er is the same as used on machines which are sold for very much more money. The pawl and pinion at- 

 tachment has been thoroughly tested, and is beyond question one of the best to be obtained. The ratchet 

 clutch being cast solid with the pinion, there are no extra pieces to break or to get out of order. 12-inGh, $3. 



New Diamond Mower. 



Haying Tools 



Carriers, Forks, 

 Pullies, 

 Steel Track and Slings, 

 Etc. 



The Carrier is heavy and substantially made. It 

 ! fitted with wide open mouth to receive the fork 

 fully when approaching in any direction. Also has 

 swinging fork pulley, which relieves the Carrier 

 from all strain when drawing hay over a high 

 beam or into a well filled mow. The locking de- 

 vice grasps, the fork pulley on either side and 

 permits it to swing free. Guaranteed to give satis- 

 faction-. Car, $4.85; steel track per foot, locts. 

 Special discount for cash. 



PUSH 

 CARTS 



For the merchant, printer, 

 farmer, etc., to have one of 

 these carts on his premises it 

 will be found a most useful 

 vehicle. There are so many 

 purposes for which they can 

 be employed — carrying bund- 

 les, printers' forms, farmers' 

 tools and light implements, 

 etc. It is never out of place, 

 and always ready to pick up 

 at short notice. They are 

 nicely finished; higher wheels, 

 better ironed and altogether 

 superior to anything of its 

 kind on the market. There is 

 now an immense demand for 

 these carts, but notwithstand- 

 ing we have placed the price 

 low. Price, $7.75. 



