52 
Table 35. — Comparison of mill-eat logs cut into 4-foot sections and into 12-foot lengths, 
by mills in Somerset and Wicomico Counties. Md. 
BUTT LOGS. 
Diameter 
inside 
bark 
small 
end. 
Inch boards . 
Increase 
(not 
'curved). 
Flitch. 
Increase 
(not 
curved). 
Volume 
scaled as 
one 12- 
foot log. 
Volume 
scaled as 
three 4- 
foot logs. 
Volume 
scaled as 
one 12- 
foot log. 
Volume 
scaled as 
three 4- 
foot logs. 
Inches. 
4 
5 
6 
8 
9 
10 
11 
Bd.ft. 
5 
8 
13 
19 
25 
34 
43 
54 
Bd.ft. 
6.6 
10.8 
16.0 
23.1 
30.6 
39.9 
48.8 
57.9 
Per cent. 
32.0 
35.0 
23.1 
21.6 
22.4 
17.4 
13.5 
7.2 
Bd.ft. Bd.ft. 
7- 8.9 
10 14. 1 
15 19.9 
Per cent. 
27.1 
41.0 
32.7 
" ! i 
MIDDLE LOGS. 
4 
5 
6 
7 
8 
9 
10 
11 
5 
8 
13 
20 
28 
36 
44 
54 
8.4 
10.5 
16.0 
21.9 
30.3 
38.9 
47.9 
57.2 
68.0 
31.3 
23.1 
9.5 
8.2 
8.1 
8.9 
5.9 
6 
11 
17 
9.8 
13.7 
19.9 
63.3 
24.5 
17.1 
TOP LOGS. 
3 
4 
5 
6 
8 
9 
10 
11 
1 
5 
9 
15 
21 
29 
37 
46 
56 
4.5 
8.3 
12.1 
18.0 
26.1 
31.2 
39.9 
50.0 
59.2 
350.0 
66.0 
34.4 
20.0 
24.3 
7.6 
7.8 
8.7 
5. 7 
5 
11 
7.0 
11.0 
15.5 
40.0 
57.1 
40.9 
TREE VOLUME TABLES, 
Tables 36 to 44, inclusive, are tree volume tables (for trees under 50 years in age), 
based on the taper table (Table 45) and the log volume tables (Tables 30 to 35) . Tables 
36 and 38 give the volume in cubic feet of trees of different diameters and heights, 
with and without bark. Table 37 gives the per cent of volume subtracted for bark 
from the figures given in Table 36 to get Table 38. 
Tables 39, 40, and 41 show the volume in board feet of trees of different diameters 
and heights, 39 based on actual cut of logs and trees followed through the mill, 40 
based on logs and trees scaled by the Scribner log rule, and 41 scaled by the Doyle 
log rule. It will be seen that the mill -cut table ranges over 10 per cent higher than 
the Scribner rule table, and in comparison with Doyle rule table ranges 100 to 500 
per cent higher on trees under 12 inches in diameter breasthigh, and 25 to 100 per 
cent higher on trees over 12 inches in diameter. The Doyle rule is commonly used 
in logging operations in southeastern Virginia, and is very much to the advantage 
of the mill man when cutting small trees. 
