160 
Plate XVI 
Wedges and knives 
Figuhb 1. Wedge made of a sliver of a rib of a whale. Shell-heap A. Cat. No. VIII-B- 
1078. (Page 56.) 
Figure 2. Wedge made of a large, round prong of antler bevelled off on the concave side. 
Shell-heap A. Cat. No. VIII-B-1080. (Page 56.) 
Figure 3. Wedge made of a small prong of antler whittled off on both sides and battered 
on the top. Shell-heap A. Cat. No. VIII-B-1087. (Page 57.) 
Figure 4. Wedge made of bone sharpened off from both sides. Shell-heap A. Cat. No. 
VIII-B-1089. (Page 57.) 
Figure 5. Wedge made of antler sharpened from both sides. Shell-heap A. Cat. No. 
VIII-B-1081. (Page 57.) 
Figure 6. Pin-shaped object made of antler, punch-shaped at the bottom, battered on top. 
Shell-heap A. Cat. No. VIII-B-1072a. (Page 57.) 
Figure 7. Object chipped from metargillite, possibly a point for a knife. Shell-heap A. 
Cat. No. VIII-B-1003d. (Page 57.) 
Figure 8. Carving knife made of a lower incisor of a beaver with end cut off. Shell-heap A. 
Cat. No. VIII-B-1065a. (Page 58.) 
Figure 9. Short carving knife made of the lower incisor of a beaver with end cut off. Shell- 
heap A. Cat. No. VIII-B-1065b. (Page 58.) 
Figure 10. Carving knife made of the lower incisor of a beaver with inner edge and end cut 
off. Shell-heap A. Cat. No. VIII-B-1068. (Page 58.) 
Figure 11. Carving knife made of the lower incisor of a beaver with inner edge cut off and 
end broken off. Shell-heap A. Cat. No. VIII-B-1069a. (Page 59.) 
Figure 12. Carving knife made of the lower incisor of a beaver with inner edge cut away 
and end broken off. Shell-heap A. Cat. No. VIII-B-10G9b. (Page 59.) 
Figure 13. Carving knife made of the lower incisor of a beaver with both ends cut off. Shell- 
heap A. Cat. No. VIII-B-1065c, (Page 59.) 
Figure 14. Carving knife made of the lower incisor of a beaver with cutting edge cut off 
and broken root end rounded on front and side. Shell-heap A. Cat. No. VIII-B-1064a. (Page 59.) 
Figure 15. Carving knife made of the lower incisor of a beaver with end broken off and 
worn smooth and cutting edge ground off obliquely from side to side. Shell-heap A. Cat. No. 
VIII-B-1066a. (Page 59.) 
Figure 16. Carving knife made of the lower incisor of a beaver with root end cut off and 
cutting end ground off obliquely on one side. Shell-heap D. Cat. No. VIII-B-612a. (Page 59.) 
Figure 17. Carving knife made of the lower incisor of a beaver broken at the root end and 
cut off in two scallops on one side. Shell-heap D. Cat. No. VIII-B-620. (Page 59.) 
Figure 18. Carving knife made of the lower incisor of a beaver broken off at root end and 
sharpened obliquely across a corner of the cutting edge. Shell-heap A. Cat. No. VIII-B-1Q67. 
(Page 59.) 
Figure 19. Carving knife made of the lower incisor of a beaver, a longitudinal piece shar- 
pened on the artificial edges of the upper half, out obliquely across the rear and squarely across 
the end of the root end, and cut across the natural cutting edge. Shell-heap A. Cat. No. VIII- 
B-lG62a. (Page 60.) 
Figure 20. Carving knife made of the lower incisor of a beaver, rubbed on one side. Shell- 
heap D. Cat. No. VIII-B-619c. (Page 60.) 
Figure 21. Carving knife made of a longitudinal section of a lower incisor of a beaver broken 
off at both ends and rubbed on the longitudinal section. Shell-heap A. Cat. No. VIII-B-1062b. 
(Page 60.) 
Figure 22. Carving knife made of the upper incisor of a beaver broken off at root end with 
cutting edge gouged out and inner angle of tooth cut off. Shell-heap D. Cat. No. VIII-B-619a. 
(Page 60.) 
Figure 23. Carving knife made of the upper incisor of a beaver, cut off across the inner angle 
from the root end to near the artificially sharpened natural cutting edge. Shell-heap D. Cat. 
No. VIII-B-619b. (Page 60.) 
Figure 24, Carving knife made of the upper incisor of a beaver with cutting edge ground 
off obliquely from side to side. Eastern part of shell-heap N. Cat. No. VIII-B-820. (Page 60.) 
Figure 25. Carving knife made of the upper incisor of a woodchuck with cutting edge ground 
off obliquely from side to side. Shell-heap A. Cat. No. VIII-B-1071. (Page 60.) 
Figure 26. Carving knife made of a longitudinal section of an upper incisor of a beaver with 
irregular artificial edge sharpened above. Shell-heap A. Cat. No. VIII-B-1062c. (Page 60.) 
Figure 27. Less than a longitudinal half of an upper incisor of a beaver rubbed flat and lacking 
part of the root end. Shell-heap D. Cat, No, VIII-B-617a. (Page 60.) 
