FUNDAMENTAL CONSIDERATIONS 
7 
same time turning the mirror at such an angle that it reflects light 
from the window or lamp up through the opening in the stage to 
the objective. Mirrors have two faces, a plane and a concave. 
Use the concave unless otherwise directed. 
4. Regulate the quantity of light by the diaphragm. If too bright 
it must be cut off somewhat. The higher powers require brighter 
light than the lower. 
5. Place the slide on the stage in a horizontal position with the 
object over the middle of the opening through which light is thrown 
from the mirror. 
6. With the lower pow’er in position, move the coarse adjustment 
until either the object or small solid particles on the slide appear 
distinctly, which means that the lenses are in focus. The object, 
if not under the lens, may now be brought into the field by moving 
the slide back and forth very slowly while looking through the ocular. 
To improve the focus, slowly turn the fine adjustment screw. 
7. To focus with the high-power objective, first find the object 
with the low power and arrange in the center of the field. Put clips 
on slide without moving it. Raise the body tube by means of the 
coarse adjustment. Then turn the high-power objective into posi- 
tion. (If two objectives only accompany your instrument, the high- 
power is the longer one.) Lower the body tube carrying the objec- 
tive until the objective front lens nearly touches the cover glass. 
A slight movement of the fine adjustment should show the object 
clearly. Never focus down with the high-power objective because 
of the danger of pressing it into the cover glass and ruining the 
delicately mounted lenses. 
8. Accustom yourself to use both eyes indifferently and always 
keep both eyes open. If right handed, observe with the left eye, 
as it is more convenient in making drawings. 
RULES FOR THE CARE OF THE MICROSCOPE 
1. In carrying the microscope to or from your table, grasp it 
firmly by the pillar and hold in an erect position, so that the ocular 
which is fitted loosely into the draw tube may not fall out and its 
lenses become damaged. 
