PLATE VIIL 
Elevation of the plan in Plate VII. and the plan compressed, for the purpose of shewing how the 
oblique sections of the internal parts are drawn. Besides that part shewn as covered in, there are 
four sections through different parts of the house seen in this Plate, by which every part of its 
formation worth shewing in a length section, is seen, and made plain to any capacity. The upper 
sashes, are one third of the length of the whole slope, and the vines are planted inside. 
A, is the portion covered in; at each end of the front wall, are seen oblique sections of it, its flue, 
and path. 
B, shews the section of the back flue, over the furnace (and the neck of the other flue, just entering 
the back wall, its ascent marked by pricked lines, in which the damper is placed). In the other 
end section the revolution of the same flue is seen; its entrance into the back wall, is seen 
over B, and the pricked lines mark its course. 
C, shews the back wall of the pit, with its columns, and an oblique section shewing the path. 
D, shews the plants in the pit, its front wall, with columns and grooves. 
At E, is shewn an oblique section of the pit; the manner of drawing it is seen from the line marked 
1-2- under it in the plan, by drawing up perpendiculars from the respective lines it intersects, 
as the two seen from each extremity. 
