Harrows, Culti-Packer and Spreader 
Clarkes Cutaway Utility One-Horse 
Harrow 
The Utility Harrow, as its name implies, 
has a wide variety of uses and is ideal for the 
farmer who wants a one-horse Harrow that 
will give thorough tillage. Being spaced only 
5 inches apart, the 10 discs thoroughly chop 
and pulverize the soil. The discs are Clark 
Cutaway quality. 
Clark’s Tractor Bush and 
Bog Plow and Harrow 
This is a special heavy-duty implement for 
subduing new land, for plowing bogs, old 
pastures, or for any plowing or harrowing job 
too difficult for ordinary implements. It is 
also used extensively for orchard tillage. 
Discs are 24 inches in diameter. This service¬ 
able machine is made in four sizes; use with 
tractor or horses. 
Reversible gangs will be furnished with or 
without weight-box. Screw-control is regular 
equipment, but lever will "be furnished if it is 
preferred. 
Repair Service 
It is our endeavor to carry at all times a 
full line of replacement parts for machines 
we sell, thus trying to avoid vexatious delays 
to our customers in supplying parts needed. 
Clark’s Single- and Double-Action 
Cutaway Harrow 
The discs are cutlery steel, forged sharp. 
Bearings are hardwood, soaked in oil, which 
wear smoother, give less friction, and outlast 
metal, making them cheaper to replace when 
it is necessary to do so. The draft is light, 
due to the elimination of the truss construc¬ 
tion of the forward discs, making it possible 
to hitch the team closer than on any other 
Harrow. 
International Culti-Packer 
This is one of the best built machines that 
ever helped the farmer to get a bumper crop. 
The frame is made of heavy angle steel bars, 
bolted fast. Two channel steel bars run 
diagonally from the tongue across the frame. 
It takes the place of the old roller. This is not 
only a clod crusher, but a pulverizer, packer, 
and cultivator. This machine is practically 
indestructible and will last a lifetime. Length 
54 inches. Weight 560 pounds. 
John Deere Spreader 
A Revolution in the Art of Spreader Building 
Beater on axle makes it easy to assemble; 
easy to load—36 inches high; easy to operate 
—only two levers. 
Ball-bearing eccentric and positive ratchet 
feed insure easy and uniform operation of 
steel-link apron under all conditions. 
All-steel, 10-bar beater mounted on roller 
bearings — practically indestructible — easy 
running. 
Beater driving gears simple and durable, 
like triple gear horsepower—run in oil. 
Cold rolled steel axle, mounted in self¬ 
aligning bearings, stays put, and runs easy. 
No exposed wearing parts—no chains—no 
clutches—no adjustments. 
W. E. BARRETT CO., Providence, R. I. 
Farm Implements 6 9 
