Farm Implements 
McCormick-Deering Engines 
POSITIVE vmtSTOW 
LueoKAnoN 
MK3H TENSION 
LAAOE. 6D0P-P0QGED 
STEEL CUMVSHAfl CHCXJUSO 
CRANKCASE 
SIMPLE F\JEL 
AND FIRING SYSTEM 
REMOVABLE 
CYLINDER head 
HAND TRUCK 
AVAILABLE 
AT SLIGHT EXTRA 
COST 
When you select an Engine, you want one 
that will save you money in doing your work 
and give you years of satisfactory service. 
McCormick-Deering Engines are doing this 
all over the country for their owners. They 
will lighten your tasks and save you many 
days of weary, hard work. They are built in 
134 3, 6, and 10 H. P. sizes. 
The Farmall Mower cuts a 7-foot swath 
and is built with the same high standard of 
construction as other McCormick-Deering 
Mowers. It is power driven by the Farmall 
engine through transmission by means of the 
power take-off. The cutter-bar is made of 
high carbon steel tempered in oil. Cut gears 
are used and are enclosed and run in a bath 
of oil. It can be attached in a few moments’ 
time because the method of attaching is 
simple, one bolt only being used. Running 
at the usual cutting speed, from 25 to 30 
acres can be cut in a day. 
McCormick-Deering Hay-Rakes 
All McCormick-Deering Hay-Rakes are 
made of steel throughout and will stand up 
successfully under rough usage. Bushings in 
the wheels can be removed and replaced when 
worn. The height to which it lifts can be 
adjusted for light or heavy hay. 
MYERS HAYING TOOLS 
Clover Leaf Hay Unloader 
Heavily and substantially built of malleable 
iron throughout. Fitted with wide-open 
mouth to receive the fork pulley when ap¬ 
proaching in any direction. Also has a swing¬ 
ing fork pulley which relieves the car from 
all strain when drawing hay over a high beam 
or into a well-filled mow. Track wheels 
revolve on J^-inch turned steel axles. Rope 
sheaves have larger hub than any other make 
of carrier. The lock consists of three parts 
and has no springs. Carrier is adjustable to 
any standard make of steel track. 
Made either for wood or steel track. 
Price, $9. 
Myers Hay Forks 
Automatic Grapple Fork 
The Automatic Grap¬ 
ple Fork is made with 
either 4 tines or 6 and is 
unlike any other inasmuch 
as it is not only balanced 
tion the natural pull on 
the trip-rope closes the fork and locks it 
securely, thus returning it to the load all 
ready to enter the hay without any attention 
whatever from the operator as to the setting 
of the lock, etc. It is doubly braced through¬ 
out, making it very rigid and strong. 4-tine, 
$9.50; 6-tine, $11. 
The Double Harpoon Forks are made in 
two lengths of tine, 25 and 31 inches, and are 
the same excellent quality as the Automatic 
Grapple. 25-in. $2.25; 31-in. $2.50. 
W. E. BARRETT CO., Providence, R. I. 
Farm Implements 73 
