U&nduU ScWfiiney 
'JPvrtlunri jHuin-e 
Special Stall No. 500 
With No. 181-W Stanchion 
Same rust resisting steel tubing and malleable 
fittings as used on other stalls in our line. 
The No. 500 Stall is shipped knocked down and 
without the Hudson Angle Anchor System. (We rec¬ 
ommend the factory assembled stalls with Angle 
Anchors as the saving in cost of installing and elim¬ 
ination of mistakes will more than offset the differ¬ 
ence in price.) 
Upright, Partition and Top Rail: 1% inch O. D. 
carbon steel tubing. 
Fittings: Malleable. Tee Couplings two bolt dust- 
proof type. 
Anchors: No. 10B “U” bolt and yoke as shown on 
page —. 
Width: Regular 3 feet, 6 inches. Narrower stalls 
can be furnished when specified. 
Stanchions: No. 181-W Adjustable wood lined 
stanchion shown on page 128. 
Finish: Hudson Fused Aluminum. 
Weight: Complete with No. 181-W Stanchion, 52 
pounds. 
Can be furnished with other Hudson Stanchions at 
slightly higher prices. 
Hudson Lever Hoist Litter Carriers 
Make a Clean Job Out of a Dirty One 
(Patented) 
Lever Handle Can Be Pushed Up Out of Way When Not in Use 
The ordinary chain hoist carrier raises and lowers by means of the hand chain, which in the 
course of constant usage, becomes covered with manure, and is dirty to handle. Compare this with 
the Hudson lever operated carrier where the business end of the lever is fully four feet away from 
the bucket. The lever can be kept absolutely clean under all conditions. 
Whether the bucket is raised or not, the operator can move the carrier by means of this lever. 
This is possible because the lever is attached directly to the carriage. The ordinary chain hoist 
carrier is usually propelled by pushing the litter smeared bucket. 
The carrier works smoothly and quickly; in fact it is easier to operate and works faster than 
any other carrier. 
Does Not Have Hudson Anchor System 
127 
