88 HARROWS 
The I. W. Scott 
Iron City Pipe Bar Lever Harrow 
The Iron City Spring-Tooth Steel-Frame Lever Harrow 
shown here represents one of the most popular types of this 
class of Harrows. 
The Iron City has angle steel frame, runner style, and the 
front of the Harrow is constructed with a view to prevent 
the gathering of trash. 
Renewable steel shoes are bolted to the under side 
of all frame angles, and can be replaced at moderate 
expense. 
The tooth bars are steel pipe, to which the teeth 
are bolted and held securely with the assistance of 
spanner clips. 
All teeth are carefully tested before shipment and 
are guaranteed against defects. Two-section, with 15 teeth, weight 225 lbs., $23.50; two-section, with 17 teeth, weight 240 lbs., $25. 
Prices on three- or four-section Harrows will be quoted on request. 
Pittsburgh Perry Wood-Frame Harrow 
__ /—i 
;T. '''' r 
H 1 A 
'If I 
\ _• 
1 | (A \-i 
IP. 
1 • I, 
* 
|l , I] 
Steel Lined, Guarded, Protected Bolt Heads, 
Perfect Tooth Seat, Adjustable Hitch 
THE BEST OF THE 
“WOOD FRAMES” 
The best Wood-Frame Harrow on the market. 
Beams full 3 inches; linings pis-inch angle steel; bolts 
p6-inch; teeth are full length and weight, tempered in 
oil and fully warranted; our tooth fasteners are channel 
steel. Steel braces support and strengthen the outer 
end of the Harrow. 
These Harrows are well made of best oak and hinged 
properly so that they will not buckle in the middle, 
but ride evenly, pulling all teeth in the ground at about 
an even depth. 
Teeth are made from open-hearth, high-carbon 
spring steel, oil-tempered and tested. 
Price, with 16 teeth, weight 191 lbs., $19; with 18 
teeth, weight 209 lbs., $20. 
Pittsburgh Combination 
Harrow 
The illustration tells the story— a strong, simple, 
and efficient Harrow. 
Beams. The under side of the Pittsburgh Com¬ 
bination Harrow is constructed of high-carbon angle 
steel beams, and the upper side of best oak beams* 
so there is no wear against the wood parts. 
Teeth. Best spring steel, formed so that the pitch 
can be changed to suit the operator. They fasten on 
top of the frame and the bolt heads are protected so 
they will not wear off. Malleable Iron Tooth Clips 
and pfs-inch bolts. 
Stump guards (or braces) placed to protect the 
frame and make it perfectly rigid. With 16 teeth, weight 161 lbs., $19. 
