The I. W. Scott Company, Pittsburgh, Pa 
DAIRY SUPPLIES 141 
HINMAN “35” 
THE MILKER OF TODAY 
Armor-Klad Bottle 
Cases 
Top View Bottom View 
Armor-Klad Cases are built so strong that even at the first 
glance you are impressed with their exceptionally fine construc¬ 
tion. Armor-Klad Cases will stack with all standard Cases, and 
once you use them you will soon want to replace all your crates 
with Armor-Klads. 
The top view shows the rigid construction, the lapping corners 
of heavily galvanized iron, and the angle-iron supports for the 
dividing wires. Not a nail or a screw is used in the manufacture 
of this tough crate. All the wires extend clear through the wood 
slats and the corner irons are riveted, inside to outside. One of 
the most important features of this Case is the construction of 
the bottom runners. The runner is dovetailed into the bottom 
slat and is further held in place by the corner irons. 
No. 103C 12-qt. case. . .$2 20 No. 302C 20 half-pt. case .$2 20 
No. 201C 20-pt. case. .. 2 00 No. 303C 30 half-pt. case . 2 25 
10 cases or more, 10 cts. per case less. 
Here is a Milker unit that 
works on any pipe-line built and 
is guaranteed by a company that 
has more than 100,000 milkers 
at work, plus 25 years of milk¬ 
ing-machine experience. 
The price, $35, is the lowest 
ever quoted for a single-unit 
pipe-line machine. However, 
the performance is not to be 
judged by the price. The Hin- 
man “35” is second to none in 
milking fast, clean, and correctly. 
The teat-cups positively stay 
on without a surcingle; snappy 
relief is effective through squeeze 
of one-piece rubber-lined cups. 
New visible milk-flow; auto¬ 
matic vacuum shut-off at milk- 
claw; and a timer mechanism 
that has been in constant 
operation for more than three 
years, perfected in every detail. 
These are just a few advantages that facilitate year-round 
success, comfort to the cow, and general efficiency. 
If you need a Vacuum Pumping Outfit and Stall Cocks, or a 
Higher Priced Milker Unit made of Nickel and Stainless Steel, 
write us for special circular and prices. 
Finest, Fastest Electric Clipper 
Ever Invented 
Stewart J-2 Elec¬ 
tric Clipmaster with 
leather strap handle 
for any 110- to 120- 
volt current, $15; 
for any 220-volt 
current, $17; for 
32-volt direct cur¬ 
rent, $17; Postage 
extra, 25c. 
MOTOR-IN-HANDLE 
Clipmaster 
Clips Cows, Horses, and Mules 
This remarkable animal clipper has great 
reserve power. Is very light but extremely 
sturdy in construction. Has perfect balance in 
any clipping position with easy, comfortable 
grip. That shown on 
the left has an ad¬ 
justable leather strap 
handle. Both models 
shown are equally 
handy for left-handed 
or right-handed clip¬ 
ping. Quality con¬ 
struction through¬ 
out. 20 feetof rubber- 
covered 3-lead cord 
with rubber- 
sheathed, 
easy-p u11 
socket plug. 
F ully guar¬ 
anteed by 
world’s largest makers of clipping and shearing 
machines. 
Stewart J-l Electric Clipmaster with aluminum built-on handle for any 110- 
to 120-volt current, $16; for any 220-volt current, $18; for 32-volt direct cur¬ 
rent, $18. Postage extra, 25 cts. 
EXTRA CLIPMASTER PLATES 
The E type of clipping plate can only be used on Clipmaster 
models. E-i top clipping plate for Clipmaster only, $1.25. E-3 
extra-thin top clipping plate, Si.25. 
E-2 regular bottom clipping plate for Clipmaster, $1.75. E 4 
extra-thin bottom clipping plate, $1.75. 
Sensational New Combination 
Shearing and Clipping Machine 
The Stewart Electric Shearmaster is 
primarily designed for shearing of sheep and 
goats but simply with a change of the bottom 
plate only to the No. 4-HC it becomes an 
excellent cow- and horse-clipper. Light and 
easily handled but very strong and 
sturdy in construction. Ideal for flocks 
numbering up to 200 sheep or goats, 
and the right machine to use w'here 
there is both clipping and shearing to 
be done. 
Stewart Electric Shearmaster 
for any no- to 120-volt current, 
$21. Postage extra, 25 cts. 
Stewart Elec - 
trie Shear" 
master Clips 
and Shears 
EXTRA PLATES 
4-HA top plate for both clipping and shearing, 30 cts. 
4-HB bottom shearing plate, 75 cts. 
4-HC bottom clipping plate for clipping cows and horses, $ 1 . 50 . 
Hand-Power Shearing and Clipping Machines 
Stewart No. 10. The easiest turning, most satisfac¬ 
tory hand-power clipper ever made. Long lasting and 
sturdy, easy to use with 6-foot flexible shaft and chain 
and latest patented B-i clipping head. Shipping weight 
complete, knocked down in wooden box, 33 pounds. 
$12.50. 
Stewart No. 9. Hand-Power Shearing Machine for 
shearing sheep and goats. Has universal jointed, cog- 
driven shaft, fitted with light-running, ball-bearing Stew¬ 
art No. 7 shearing handpiece. Built to last a lifetime. 
Shipping weight complete, knocked down in wooden box, 
45 pounds. $22.95. 
Extra Plates 
276 Top cutter for shearing. 30c. 
277 Bottom shearing comb. 80c. 
360 Top plate for clipping. $1.25. 
361 Bottom plate for clipping. 
$1.75. 
