MARYLAND 
WISEMAN-DOWNS COMPANY, INC. 
69 
JOHN DEERE SPIKE-TOOTH HARROWS 
Two-Section John Deere Spike-Tooth Harrow, Having 30 Teeth to a Section 
This harrow is built in sections with 25, 30 or 35 teeth to the section, either K-inch square or %-inch diamond- 
shaped teeth. 
The John Deere Sipke-Tooth Harrow is unusually strong for its weight. One reason for its great strength is that 
there are 2 stiffening bars in each section. The effect of these stiffening bars is to transmit any bending force 
which may come on a tooth beam to all of the other tooth beams in that section, making them all act together 
to resist bending. Thus it is practically impossible in ordinary work to bend a tooth beam on a John Deere 
Spike-Tooth Harrow. The tooth beams are very strong and are made of channel bar, thicker in the center than 
at the edges—a form which offers great resistance to twisting. 
Three-Section John Deere Rigid Spike-Tooth Harrow—Teeth Are Securely Held 
The teeth are held to the tooth bars by special steel clips which fit closely around the teeth, holding them into 
small notches in the edges of the tooth bars. These tooth clips are then drawn up tightly by means of two nuts 
which prevent them from working loose and make it practically impossible for a tooth to twist around, drop out 
and become lost. Each of the steel teeth is complete in itself, well made, with a head formed at the top so that the 
tooth cannot drop through the clip. Four runner teeth are furnished with each section, and are used as transports when 
moving the harrow from one field to another, makingit unnecessary to take the implement down and load it on a wagon. 
50-Tooth 6 A Spikes Harrow. $19.50 60-Tooth A Spikes Harrow. $21.50 
90-Tooth % Spikes Harrow. $35.00 
JOHN DEERE WOOD-BAR SQUARE END HARROW 
?**££** 
When you buy a wood-bar harrow, you want it to last a long time. The longer it lasts, the less it costs and the 
more it pays. Be sure the harrow you buy has the best quality wood—its life is strictly dependent on that quality. 
The John Deere Wood-Bar Harrow is made of carefully selected, thoroughly seasoned oak. It is unusually strong 
and long-lived. 
The tooth bars are riveted at each tooth. They hold the teeth firmly and do not warp. The ends of the tooth 
bars have a strong and durable connection to the side arms. 
Teeth are the strong standardized square type set close together—this harrow puts land in finest condition. Handy 
levers control setting of teeth. 
Sizes Wood-Bar Square-End Harrow 
Section Number of Teeth Width Price 
Two. 84 10 feet $32.00 
Three. 126 15 feet 44.00 
Four. 168 20 feet 60.00 
SYRACUSE LEVER SPRING TOOTH HARROW 
The frame bars of angle steel, thoroughly pro¬ 
tected by steel shoes, which double the life of the 
harrow. Inside frame bars raised at the end, 
giving free outlet to trash. Frame with small 
opening in front, absolutely preventing loading 
at this point, which is so common with other 
makes. The tooth bars are of channel steel 
journaled in malleable brackets above the frame 
which gives the teeth high support and great 
range or adjustment for depth of cultivation and 
clearance. Spring teeth of high carbon steel, 
without bolt holes, and held by malleable 
holders, allowing for separate adjustment when 
worn. By use of the levers the teeth can be 
readily set deep or shallow, or can be thrown 
out of the ground to clear off trash and for 
dragging harrow from one place to another. 
Central and direct draft without side motion; 
adjustable hitch, so that the teeth at the front 
and rear can be regulated to work at the same 
depth. No spring-tooth harrow made is giving 
such universal satisfaction. 
* 
15-Tooth. $23.50 
17-Tooth. 25.00 
23-Tooth. 3.'.00 
25-Tooth. 37.00 
