116 PRUNING TOOLS 
The /. W. Scott Company , Pittsburgh , Pa, 
Bartlett Tree Trimmers 
No. 1-RJ Compound Lever Type. Built for heavy work and will cut a limb up to 
i yi, inches in diameter. Rod connects the knife lever along one side of the pole to the 
handle lever on the opposite side, which allows the rod to cross the pole and results 
in half of the strain on each side of the pole, giving about double strength. 
This is a jointed pole pruner and has several advantages over a solid pole type of 
pruner. Sections are joined by means of brass sleeves making the tool perfectly rigid. 
8-ft., 2 sections, $6.25, postpaid $6.50; 12-ft., 3 sections, $7, postpaid $7.30; 16-ft., 
4 sections, $7.75, postpaid $8.10. 
No. 1-W Pulley Type. Furnished with jointed pole. Has rope-operated cutting 
head. Each section is 4 feet long and equipped with brass sleeve body on one end 
and brass ferrule on opposite end. As many of the lower sections can be used as 
desired. An ideal pruner for use near high-tension power lines. 4-foot top section 
$6.75; extra 4-foot sections, each $2.75. Postage extra, 10 cts. per section. 
No. 44 Bartlett Pole Saw 
No. 1 -RJ 
No. 1-W 
Intended for use where the limbs are larger than the capacity of the No. i-RJ or No. 
i-W. The saw blade is 16 inches long and securely held by the head, which is stamped 
from cold rolled steel and fastened to the pole by three bolts. The blade can be adjusted 
to three angles to suit the operator’s position. 4-ft. Jointed Pole Saw with brass ferrule attached, 
$4.10; 4-ft. sections, each $2. 75; 8-ft. Solid Pole Saw, $4.40; 10-ft. Solid Pole Saw, $4.70; 12-ft. 
Solid Pole Saw, $5. 
Clyde Tree Trimmer 
No. 5407 . Blade and hook are made from the best tool steel, firmly riveted to selected basswood 
handle. The blade is held open by means of a coil spring from the lever handle to the pole. A well- 
made Trimmer at a low price. 8-ft., $1.80; 10-ft., $1.95; 12-ft., $2.25; 14-ft., $2.45. 
No. 44 
Tiffany “Hammer-Forged” Pruners 
These are strictly high-class Pruners in every detail. Forged from special steel they are carefully 
tempered to stand the strain and hold a keen edge. They are put together with a heavy rivet under 
tremendous pressure, which insures a good fit, having no nuts to work loose. Their steel levers are 
forged thin and light, yet are very stiff and strong. Blade is thin and, having the draw-cut 
principle, cuts very smooth and easy, leaving no stub. Its high quality will prove it a good 
investment. Cuts 1 y 4 -inch limbs with ease. Length 25 inches. Either pattern, $3 postpaid. 
No. 5407 
Tiffany Grafting Tool 
Forged from one piece of fine crucible steel. It makes 
clean splits and does not tear the bark or split the stub too 
far. Length 8 inches. $1.25 postpaid. 
Tiffany Improved Tree Scraper 
A handy tool for removing loose bark that harbors 
insects. Made of thin forged spring steel. Length 
12 inches. $1.25 postpaid. 
Boker’s No. 550. Polished oval 
Rieser pattern hand-forged 
high carbon blade and hook. 
Volute spring. Lock nut and 
bolt. 9-inch. $1. 
PRUNING SHEARS 
Genuine French Shears. Forged tool- 
steel blade. Drop forged handles. 
Wheel-spring type which 
insures easy, positive 
action. 9-inch. $2.75. 
Henckels’ Double-Cut Pruner. Made 
especially for rugged 
work. Forged steel 
blades. Very handy for 
cutting roots and tubers. 
No. 192. $ 5 . 
Snap-Cut Pruner. The 
special hardened 
tool-steel blade cuts 
onto a soft metal an¬ 
vil with a powerful 
drawing or slicing 
action that cuts a J^-inch branch with surprising ease. Makes 
a perfect clean cut on large or small branches. All-steel con¬ 
struction; cannot break or bend. No. 119 . 7J^-inch. $1.75. 
Disston’s No. 116. Mal¬ 
leable iron with blade 
of high carbon steel, 
hardened and tem¬ 
pered. Thread and 
lock-nut tension adjustment. 9-inch. 75 cts. 
lock-nut tension adjustment. 
Disston’s No. 146. Solid 
drop forged tool steel. 
Blade hardened, tem¬ 
pered, ground and 
polished. Thread and 
9-inch. $1. 
Disston’s No. 136. Drop 
forged tool steel with 
detachable, high car¬ 
bon tool-steel blade; 
hardened, tempered, 
ground and polished. 9-inch. 
$1.50- 
hardened, tempered, finely 
8j£-inch. $3. 
Disston’s No. 156. Drop 
forged high carbon 
steel with double 
riveted, detachable 
blade of alloy steel; 
ground and highly polished. 
PRUNING SHEARS BY PARCEL POST 10 CTS. EACH EXTRA 
