The I, W. Scott Company , Pittsburgh , Pa 
DAIRY SUPPLIES 143 
HINMAN “35” 
THE MILKER OF TODAY 
Here is a Milker unit that 
works on any pipe-line built and 
is guaranteed by a company that 
has more than 100,000 milkers 
at work, plus 25 years of milk¬ 
ing-machine experience. 
The price, $35, is the lowest 
ever quoted for a single-unit 
pipe-line machine. However, 
the performance is not to be 
judged by the price. The Hin- 
man “35” is second to none in 
milking fast, clean, and correctly. 
The teat-cups positively stay 
on without a surcingle; snappy 
relief is effective through squeeze 
of one-piece rubber-lined cups. 
New visible milk-flow; auto¬ 
matic vacuum shut-off at milk- 
claw; and a timer mechanism 
that has been in constant 
operation for more than three 
years, perfected in every detail. 
These are just a few advantages that facilitate year-round 
success, comfort to the cow, and general efficiency. 
If you need a Vacuum Pumping Outfit and Stall Cocks, or a 
Higher Priced Milker Unit made of Nickel and Stainless Steel, 
write us for special circular and prices. 
Finest, Fastest Electric Clipper Ever Invented 
IILHANDLE Clipmaster 
Clips Cows, Horses, and Mules 
The Clipmaster is a completely 
self-contained machine with an extra¬ 
good, universal air-cooled motor 
inside the handle. Users say it’s the 
fastest and best Electric Clipper. 
They like its convenience, too. Just 
plug in at any electric outlet and clip away 
easier and better than ever before. 
The Clipmaster is nicely balanced, and, 
with the adjustable leather strap, has an 
easy, comfortable grip in any clipping posi¬ 
tion. Uses little current—the same as an ordinary light bulb. 
The tension is ball-bearing, specially designed for the Clipmaster. 
It requires very little pressure on the cutting blades, so they 
retain a keen cutting edge a long time. 
J-2 Stewart Electric Clipmaster with leather strap handle for any 110- to 
120-volt current, $15; for any 220-volt current, $17; for 32-volt direct current, 
$17. Postage extra, 25 cts. 
EXTRA PLATES 
E-l. Regular top clipping plate for 
Clipmaster. $1.25. 
E-2. Regular bottom clipping plate for 
Clipmaster. $1.75. 
276 . Top cutter for No. 9. 30 cts. 
277 . Bottom shearing comb for No. 9. 
80 cts. 
360 . Top plate for No. 1. $1-25. 
361 . Bottom plate for No. 1. $1.75. 
4 -HA. Top plate for both clipping and 
shearing for 4H. 35 cts. 
4 -HB. Bottom shearing plate for 4H. 
75 cts. 
4 -HC. Bottom clipping plate for 4H. 
$I. 5 °- No. 361 Bottom Plate 
MAAAA AAAAAAA AAAM 
CD 
VPAT juue^ 
060 
No. 360 Top Plate 
;o5 
361 
Hie ago rifAioit s~ 
^2/ 
Top View 
Armor-Klad Bottle 
Cases 
Bottom View 
Armor-Klad Cases are built so strong that even at the first 
glance you are impressed with their exceptionally fine construc¬ 
tion. Armor-Klad Cases will stack with all standard Cases, and 
once you use them you will soon want to replace all your crates 
with Armor-Klads. 
The top view shows the rigid construction, the lapping corners 
of heavily galvanized iron, and the angle-iron supports for the 
dividing wires. Not a nail or a screw is used in the manufacture 
of this tough crate. All the wires extend clear through the wood 
slats and the corner irons are riveted, inside to outside. One of 
the most important features of this Case is the construction of 
the bottom runners. The runner is dovetailed into the bottom 
slat and is further held in place by the corner irons. 
No. 103C 12-qt. case. . .$1 95 No. 302C 20 half-pt. case .$2 00 
No. 201C 20-pt. case. .. 1 85 No. 303C 30 half-pt. case . 2 00 
10 cases or more, 10 cts. per case less. 
Sensational New Combination 
Shearing and Clipping Machine 
The Stewart Electric Shearmaster is 
primarily designed for shearing of sheep and 
goats but simply with a change of the bottom 
plate only to the No. 4-HC it becomes an 
excellent cow- and horse-clipper. Light and 
easily handled but very strong and 
sturdy in construction. Ideal for flocks 
numbering up to 200 sheep or goats, 
and the right machine to use where 
there is both clipping and shearing to 
be done. Has no-volt motor. 
4 H. Stewart Electric Shear- 
master. $21.50. 
4 H. Stewart Combination for 
shearing and clipping. $23. Postage extra, 25 cts 
Stewart Elec¬ 
tric Shear- 
master Clips 
and Shears 
No. 1 
Hand-Power Shearing and 
Clipping Machines 
Stewart No. 1 . The easiest turning, most 
satisfactory hand-power clipper ever made. 
Long lasting and sturdy, easy to use, with 6-foot 
flexible shaft and chain and latest patented Di 
clipping head. Shipping weight complete, 
knocked down in wooden box, 33 pounds. 
$12.50. 
Stewart No. 9 . Hand-Power FShearing Ma¬ 
chine for shearing sheep and goats. Has uni¬ 
versal jointed, cog-driven shaft, fitted with 
light-running, ball-bearing Stewart No. 7 shear¬ 
ing hand-piece. Built to last a lifetime. Ship¬ 
ping weight complete, knocked down in wooden 
box, 45 pounds. $22.95. 
