28 
SATEX SEED COMPANY, SAN ANTONIO, TEXAS 
POULTRY SUPPLIES 
Chick Trough with Reel Guard 
This popular type of trough is IY 2 inches deep and 3% inches 
wide. Revolving reel has 2 plates with rounded edges to pre¬ 
vent injury of chicks. Chicks cannot roost on this feeder. Turned 
edge of trough prevents feed waste. Reel is adjustable. Per¬ 
mits using trough for different sized birds. 
No. 624A—24-incli, each-$ .30 
♦Oakes’ Chick Feed Troughs 
These troughs are ideal 
for feeding chick starter 
to baby chicks. Trough 
is stamped out of one 
piece of heavy galvanized 
steel without seams. Very 
easy to keep clean. The 
grate is a separate piece 
and slides on and off 
easily. Prevents waste of 
feed. Made of galvanized steel for dry feed and heavy 
charcoal tin for feeding milk. 
MASH FEEDER 
*No. M-71—Galvanized, 10 inch, each _$0.15 
*No. M-72—Galvanized, 20 inch, each_ .25 
*No. M-71A—Tin, 10 inch, each_ .25 
•No. M-72A—Tin, 20 inch, each_ .40 
Oakes’ Capacity 
Chick Feeder 
Saves time, labor and feed for 
large flocks of chicks. Double 
feeding space with 25 feeding 
spaces on each side; 
wires extend into hop¬ 
per so that chicks in 
eating shake down the 
mash and prevent clog¬ 
ging; hinged lid on 
top; capacity 75 lbs. 
of mash; length 48 in.; 
height, 12 in.; width at 
bottom, 11 in. 
*No. M-848—48-in. size, 
capacity 75 lbs. $6.00 
♦Oakes’ New Chick Trough 
A new inexpensive chick trough. Made of galvanized 
iron with galvanized cross wire welded on. Ends are 
soldered on so that trough can be used for either feed 
or water. Easy to fill and clean. Cross wire prevents 
chicks from getting into trough or soiling feed. 
*No. M-5120—18 inch, each_$ .20 
*No. M-5124—22 inch, each_ .25 
♦Oakes’ 
Inexpensive Chick Feeder 
This feeder is made in three sizes, 21 inches, 35 inches 
and 42 inches in length. Sloping top prevents roosting 
and slides off for filling or cleaning. V-shaped bottom 
throws feed toward the outside and prevents clogging. 
21-inch size has 32 feeding spaces; 35-inch size has 50 
feeding spaces; 42 inch size has 68 feeding spaces. 
No. M- 36—21 inches, each_$1.15 
No. M- 37—35 inches, each_1.65 
No. M-375—42 inches, each_2.10 
♦Oakes’ Feeder 
For Growing Chicks 
Made of steel, 4 feet in length, capacity about 12 qts. 
Wires 2 inches apart prevent fowls getting into trough. 
No. M-6A—Without lid_Each $1.75 
♦Oakes’ 
Growing Chick Feeder 
This new feeder is decidedly popular in all parts of 
the country for feeding dry mash and all kinds of 
ground feed to growing chicks and mature fowls. 
rills from the top. Feed flange can be raised or 
lowered to feed either fine or coarse feed. Feed can¬ 
not be thrown out and wasted. Cannot clog, as all feed 
is forced out under the openings by the V-shaped bot¬ 
tom. Chicks feed from both sides. Lid is hinged. 
Tippler prevents roosting on top. 
No. M-29—Length 35 inches_$3.00 
No. M-30—Length 42 inches_3.90 
♦Large Round 
Buttermilk Feeder 
It is 12 inches in diameter 
and 1% inches deep. Holds 
three pints of liquid food. 
Made from heavy dairy tin; 
rustproof; has 22 feeding holes 
making 36 inches of feeding 
space. Chicks cannot waste 
the feed or get in it and get 
wet or contaminate the feed 
or liquid. Top is cone-shape to prevent chicks from get¬ 
ting on it. Easy to take apart for cleaning. 
No. M-82—Each_$ .60 
GOOD POULTRY EQUIPMENT of proper con¬ 
struction pays big dividends in the saving of 
feed and labor. 
