64 
WISEMAN-DOWNS CO., INC. - 34 E. PRATT ST. - BALTIMORE, MD 
SYRACUSE STEEL AND WOOD BEAM PLOWS 
Medium weight general purpose plows, having long mold- 
boards of good turn and superior scouring qualities. 
The plows of this series are unsurpassed for use in hard, 
dry ground, in gravelly soil, or in stony fields where the 
ordinary plow cannot be kept in the ground. They will do 
good work when all other plows fail. In ordinary ground 
they will run alone, thus showing their perfect balance. 
In the cut below is illustrated the straight landside con¬ 
struction. The rib along lower edge extends into furrow 
corner, holding plow to its work. The handles are straight 
at lower ends, permitting convenient replacement, and are 
attached high by combination braces and brackets, placing 
them out of the reach of trash. The lower attachment is 
adjustable, allowing a change in height to suit user. 
Chilled moldboards made from our own mixture of irons, 
melted in a separate furnace and chilled by the Syracuse 
process, producing boards having absolutely no equal for 
scouring quality, strength and uniformity. 
ass.- .- 
Prices: 
With With Wheel 
Plain 
Wheel and 
Jointer 
No. 
1441-B . . . 
.$20.75 
$22.15 
$26.05 
No. 
1442-B . . . 
. 19.25 
20.65 
24.55 
No. 
1459 . 
. 9.00 
10.40 
No. 
1462 . 
. 20.00 
21.40 
25.30 
No. 
1463 . 
. 16.75 
18.15 
22.05 
No. 
1464 . 
. 15.75 
17.15 
21.05 
No. 
1465 . 
. 14.25 
15.65 
19.55 
No. 
1467 . 
10.00 
11.40 
No. 
46, Double 
Mouldboard Cabbage Plow. . 
$8.00 
No. 1 HEAVY or CONTRACTOR’S PLOW 
Similar to the No. 1-78, except that the wearing parts is an excellent plow for general grading purposes. It turns 
and beam are heavier, and it has two heavy iron braces the same furrow as the regular No. 1. 
running from the curve of the beam to the handles. This Price with Wheel.$32.00 
John Deere-Syracuse 
No. 210 Sulky Plow 
JOHN DEERE-SYRACUSE No. 210 SULKY PLOW 
A LIGHT-DRAFT, ALL-WHEEL-CARRIED PLOW FOR EVERY TYPE OF SOIL 
This is acknowledged to be the lightest-draft 
plow of its type. It does an extra good job of 
plowing in any kind of soil and under all con¬ 
ditions. It runs level and plows at uniform 
depth, always even when turning square cor¬ 
ners. It’s the all-wheel-carried plow that has 
established its superiority wherever the use 
of this type of plow is practical. The advan¬ 
tages over the ordinary sulky plow are many. 
The special design of rolling landside, and the 
fact that the plow can be used with either the 
Syracuse or John Deere clean-shedding bot¬ 
toms are features responsible for the extreme¬ 
ly light-draft and good working qualities. The 
rear weight of the plow is supported by the 
rolling landside, which serves as the third leg 
of a triangular rolling support. All of the 
body and frame weight is properly balanced 
and rolls on three bearings that run in oil. 
Thus, friction between the plow and the bot¬ 
tom of the furrow is eliminated, and the side 
pressure against the furrow wall is minimized. 
Shares stay sharp longer than on any other 
riding plows, because the rolling landside pre¬ 
vents the plow from running on its nose. 
Neither is there any dragging friction, which 
is equally destructive to share life and light 
draft. The outstanding feature that is found 
only on this plow, is the front furrow caster 
wheel that actually governs the plow; the con¬ 
trolling device that automatically keeps the plow cutting furrows at uniform width and depth at all times. 
ADJUSTMENT OF FURROW WIDTH IS EASILY MADE 
AND IS POSITIVE 
In order to adjust the front furrow wheel in or out for 
a narrower or wider furrow, it is only necessary to loosen 
one set-screw on each bail, set the wheel where desired, 
and tighten the set-screws. 
CONVENIENT LOCATION OF SEAT AND LEVERS 
For convenience of operation, it has no equal. The seat 
is placed to one side, well to the rear and low down. The 
foot rest is convenient and substantial. The man on the 
seat is made comfortable; he also has all operating levers 
within easy reach. 
A big variety of bottoms are available, from which selec¬ 
tion can be made of the style and size required for your 
purpose. Can furnish bottoms 12-inch, 14-inch and 16-inch. 
Prices: 
With Chilled Jointers, 3-H. Evener, Quick Detachable Share 
No. 1450SC Right, Steel .$72.75 
No. 1441 Right, Chilled. 67.50 
No. 1341 Left, Chilled . 67.50 
No. 1441C Right, Comb. 68.50 
No. 1341C Left, Comb . 68.50 
No. 1441S Right, Comb. 70.25 
No. 134IS Left, Comb . 70.25 
No. 1442 Right, Chilled. 66.50 
No. 1342 Left, Chilled . 66.50 
No. 1442C Right, Comb. 67.50 
No. 1342C Left, Comb. 67.50 
No. 1342C Left, Comb . 67.50 
No. 1442S Right, Comb . 68.50 
No. 1342S Left, Comb. 68.50 
For 2-Horse Evener instead of 3-Horse Evener, deduct 1.50 
14-in. Rolling Colter, instead of Jointer, add. 1.00 
Combination Rolling Colter and Jointer instead of 
Plain Jointer, add.^. 3.00 
Weed Hook, extra, each.50 
