1 40 
JOSEPH BRECK & SONS 
(Corporation) 
THE “FAVORITE” CREAM SEPARATORS 
No. 2 Favorite 
The “ Favorite” Separators are made in Stockholm, 
Sweden, and are especially designed for the small 
milk producer and for family use. Attention is called 
to a few of the many favorable points covered by 
these machines: 
Construction . Thoroughly made from the finest 
material. 
Ease of Cleaning. The bowl of the No. I 
machine consists of two parts only. The No. 2 has 
two conical plates inside the bowl proper. Cleaning 
can be easily done in a moment’s time. 
Skimming. These separators have a regulator, 
which controls the flow of milk, making very even or 
sharp skimming. 
Ease of Operation. Small separators, as usually 
made, require from 90 to 140 R. P. M. 
No. 1 Favorite 
For the ** Favorite ” machines only 70 R. P. M. are necessary, and at this speed skim evenly and with great ease. 
Adjustability. The “ Favorite ” can be regulated so that a percentage of cream (say 15% ) may be obtained. 
Directions. Complete Instruction Manual sent with each separator. 
No. 1 “Favorite,” about 40 quarts per hour, complete, our net price ....... $20.00 
No. 2 ** “ 60 “ “ ** " ....... 25.00 
LUTHER TOOL GRINDERS 
BestMaide Sickle and Tool Grinder 
No. 254C 
Equipped with combination tool and 
chisel guide, sickle wheel, sickle holder 
and double faced medium and fine wheel 
4xli inches in size. Hall bearings, worm 
gear, can be swiveled to any angle. 
Weight boxed, 22 lbs. Price $5.00. 
No. 255C is the same as 254C. except 
size of wheel (5x14 inches). Weight box¬ 
ed. 23 lbs. Price, $5.60. 
Hummer No. 271C 
Equipped with adjustable toot 
rests and two grinding wheels, one 
medium and one coarse grit, each 
5x1 j in High speed, all steel, shaft 
drive, the grinder head swivels to 
any position. Weight boxed. 87 
pounds. Price $10.00 
Farm Special No. 3 
Equipped with two tool wheels, 
medium and coarse, also sickle 
grinding wheel, sickle holder, disc 
holder and polishing wheel. A com¬ 
plete machine for the farm. Size 
of tool grinding wheels 5xlJ in. 
Sickle cone 34x34 in. Weight 
boxed, 65 pounds. Price $7.00 
Power Bench Grinder No. 309C 
One medium and one coarse wheel 7x1* i«l 
dies. Strong base, wide bearings, oil cin;%, 
adjustable tool rests. Weight boxed, 40 ib* 
Price $7.50. 
Sickle and Disc Attach. No. 925AC 
Used on 309C, is an excellent way to grind 
sickles of any size and all discs up to 28 in 
Weight, boxed, 8 lbs. Price $1.25. 
• Power Bench Grinder No. 305C 
No. 305C is a very practical Power 
Bench Grinder, which can be clamped 
to most any beam, bench or other 
support, and run by a 2 inch pulley. 
Equipped with one medium Carborun¬ 
dum wheel, 5x1 fg inches, in size. 
Weight boxed, 15 lbs. 
Price $3.00 
