Miscellaneous Parts for Incubators and Brooders 
Zenith Burner 
A No-Chimney 
Burner for incubators, 
brooders, and fountain 
heaters. Perfect com¬ 
bustion without a chim¬ 
ney. Wick size, 1 in. 
No. 201 Burner. 50 cts. 
each; $1.40 for 3; $2.50 
for 6. 
MaKomb Draft Adjuster 
Automatically compensates for changing- 
winds. No matter how the wind may blow out¬ 
side the brooder house, the draft of air into the 
brooder stove remains constant and unchanged. 
The Draft Adjuster equalizes the pull, taking 
the air out of the room instead of through the 
brooder. No danger of a fire in a stove being 
raced by a strong outside wind. ^ 
Sun Hinge Burners 
Extra-heavy Burners for 
incubators and brooders. 
So designed that perfect 
combustion is insured. Eas¬ 
ily cleaned and trimmed. 
No. 202. For 1-in. wick. 50 
cts. each; $1.35 for 3; 
$2.40 for 6. 
No. 203. For lj^-in. wick. 
60 cts. each; $1.75 for 3; 
$3.25 for 6. 
No. 212. For 1-in. wick; 
wide cone. 60 cts. each; $1.60 for 3; $3.00 
for 6. 
M6-54. 4-in...$0 70 
M6-55. 5-in. 75 
Thermostat Connecting Rods 
Newtown Brooder. 25 
Cyphers Incubator. 50 
Cyphers Brooder. 50 
Buckeye Incubator (give number of incu¬ 
bator) . 25 
Buckeye Incubator Lamp Bowls. (Give 
number of Incubator.) $1. 
Brooder Stove-Pipe 
Double-Wick Sun Hinge Burners 
A Sun Hinge Burner 
with 2 wick-tubes. Gives 
double the heat of a 
single-wick Burner. 
Made of heavy brass 
throughout. 
Size No. 3. Diam. of 
thread 1% in.; diam. of 
cone ZYi in.; wick size 
1K in. 
No. 214. 
Each 3 for 
$0 75 $2 00 
6 for 
$3 90 
Moe’s Lamp Bowls 
No. 101. Capacity 1 qt.; diam. 6% in.; height 
in. Takes Nos. 201, 202, and 212 Burners 
and No. 103 Chimney. 
No. 102. Capacity 2 qts.; diam. 
2% in. Takes Nos. 203 and 214 
No. 102 Chimney. 
No. 101. 
No. 102. 
8 in.; height 
Burners and 
Each 3 for 6 for 
$0 60 $1 65 $3 00 
75 2 00 3 75 
Metal Chimneys 
For incubators and brooders. 
Made of sheet steel with round 
mica windows. The mica can be 
easily replaced if broken. No. 103, 
height 6 in., fits Nos. 202 and 212 
Burners. No. 104, height 6 in., 
fits Nos. 203 and 214 Burners. 
Each 3 for 6 for 
No. 103 _$0 25 $0 65 $1 20 
No. 104 _ 25 65 1 20 
Ohio Lock, No. 28 Gauge, Galvanized Steel 
Pipe, made in 2-foot lengths. 
3- in.$0 25 
4- in. 30 
5- in. 35 
MaKomb Adj ustable 
Roof Saddle 
Consists of two die- 
drawn spheres locked in 
any desired position by 2 
set screws. Adjusts easily 
to any pitch of roof and 
takes pipe without cutting 
or fitting. You simply slip 
the pipe through the sad¬ 
dle and screw the clamp¬ 
ing band down to exclude 
water. Die drawn of 26- 
gauge galvanized steel 
with no seams to rust out. 
Comes with cap and 
12-inch pipe. 
M4-24 4-in.$1 35 
M4-25. 5-in. 1 35 
Pipe-Caps 
Made of galvanized steel, to slip on 
top of regular pipe. Keeps out rain and 
snow and improves the draft. Easy to 
install. 
M6-27. Moe’s Pipe-Cap for 4-in. Pipe.. . .$0 25 
M6-28. Moe’s Pipe-Cap for 5-in. Pipe.... 25 
Miscellaneous Pipe Fittings 
Pipe Dampers. 4-in., 15 cts.; 5-in., 20 cts. 
Galvanized Elbows. 3-in., 20 cts.; 4-in., 25 cts.; 
5-in., 25 cts. 
Pipe Collars. 4- and 5-in., 15 cts. 
W. E. BARRETT CO., Providence, R. I. 
78 Miscellaneous Parts 
