WISEMAN-DOWNS CO., INC. - 34 E. PRATT ST. - BALTIMORE, MD 
55 
THE COLDWELL LAWN MOWERS 
Imperial 
IMPERIAL HIGH WHEEL ROLLER BEARING 
The New Imperial Roller Bearing Mower is equipped with Timken 
tapered roller bearings. Has ten and a half inch drive wheels and 
the gear ratio has been increased so as to give it higher frequency. 
Easily adjusted. Five blades. Roller bearings enclosed in dust-proof 
housings. The best mower on the market for hard service. 
16-inch.$16.00 18-inch.$18.00 20-inch $20.00 
AMBASSADOR 
The drive wheels are 10 inches in diameter, with the gears raised up 
from the ground, fully protected from the dirt and cut grass. The 
revolving cutter is 6 inches in diameter and has 6 crucible steel blades 
highly tempered and ground true their entire length. It is carried on 
our patented adjustable ball bearings. 
14-inch.$12.00 16-inch. $13.00 18-inch... $14.00 
HOLLYWOOD 
4 
This is a first class, low wheel, 
blades—8-inch wheel. 
14-inch 
machine equipped with ball bearings. 
. $6.00 16-inch 
A very light weight easy running mower. 
$6.35 
METROPOLITAN 10-inch Wheel 
A light, durable mower guaranteed to give 
mower for small gardens—5 blades. 
16-inch 
excellent satisfaction and priced to meet the demand for a cheap lawn 
$7.50 18-inch $8.25 
COLDWELL’S IMPROVED HORSE LAWN MOWER 
Some of its points of merit are: 
Light draft, large driving rollers, 
non-clogging caster wheels; can be 
thrown out of gear without driver 
leaving seat; both sides of machine 
can be adjusted at once; device for 
instantly raising all knives from the 
ground when passing over stones or 
other obstructions, or when drawing 
over a roadway; side-draft attach¬ 
ment to prevent horse from walking 
on grass before it is cut. 
35-inch, complete with seat and 
shafts . $175.00 
Horse and Hand Lawn Mowers Sharpened and Repaired in a Thorough and Satisfactory Manner 
The Coldwell Cub is a light, substantially built power lawn mower with a 
21-inch detachable front cutting unit and a full width drive roller. Separate 
clutches control the cutting unit and the traction roller. The clutch levers 
are conveniently located on the handle and can be engaged or disengaged 
with one finger. The drive roller is divided and is driven through a differen¬ 
tial so that sharp turns can be made without marking the lawn. 
The engine and transmission are mounted on a steel frame in a perfectly 
accessible position and located so the mower is in lateral balance. The engine 
has been specially designed for this mower. 
The front cutting unit makes it possible to cut close to trees or walls so 
that a finished job can be done without the use of a hand mower. 
In this machine we realize our ideal of a light, strong, easily handled 
mower, so simple that an inexperienced man can understand and operate it. 
It is made light and strong by using steel and malleable iron where best 
adapted. Flexibility in maneuvering is obtained by proper distribution of 
weight and mounting on a large drive roller and casters. 
Price $195.00. 
Quality Our Watchword 
