WISEMAN-DOWNS CO., INC. - 34 E. PRATT ST. - BALTIMORE, MD. 
65 
jOHN DEERE No. 4—2 BOTTOM TRACTOR PLOW 
Long, conveniently-reached levers make it 
easy to control depth and leveling accurately. 
The power-lift is simple, and positive. It 
will stand the hardest, roughest work. It will 
last far longer than any ordinary power lift. 
The land wheel, from which the power-lift 
operates, is solid and straight from tire to box 
on the inside; it does not pick up dirt or trash, 
thus it is a natural protection to clutch and 
driving parts. On a half turn of this wheel, 
the bottoms lift high and level—no digging 
into the ground or clogging with trash when 
turning the ends of the field. 
When the bottoms are lowered, they enter 
the ground point first and penetrate quickly 
to plowing depth. 
You Want Strong and Close-Fitting, Quick-Detachable 
Shares 
Bottoms on the John Deere are equipped with quick- 
detachable shares. The John Deere quick detachable device 
is different from others and has important advantages. 
You simply loosen one nut to remove a share; tighten 
the same nut and the share is on tight. 
The nut is large and fits on a large, heavy-thread draw- 
bolt. 
When drawn into place by turning the large nut, the 
John Deere quick-detachable share fits closely and stays 
tight—no loosening to give that “weaving” effect which 
increases draft and impairs work. 
You Want An Easily-Operated Plow 
You want a plow that can be operated with little effort 
on your part—a plow with no complicated mechanism—a 
plow of simple and positiye adjustments. 
The John Deere meets those requirements. 
The hitch is quickly and accurately adjustable up and 
down and to the side. 
JOHN DEERE 
High-Grade Steel Discs Easily Adjustable for Width of Cut 
The discs, made of high-grade steel, are designed for 
good penetration and cut clean. The disc faces are smooth, 
no bolts projecting. 
Twenty-four inch discs are regularly supplied. Twenty- 
six inch discs are furnished on special order. 
The discs may be set to cut eight, ten or twelve inches. 
On the single-disc, the adjustable front furrow axle pro¬ 
vides the means for changing the width of cut. On the 
double and triple-disc, the front disc’s width of cut can 
be changed by adjusting the front furrow axle, while the 
change can be made for the other discs by removing the 
connecting bolts and changing the positions of the beams 
to each other, marks on the beams indicating the different 
positions. 
Bearings Keep Discs Revolving Freely 
The discs are equipped with high-speed chilled bearings, 
oil-tight and dust-proof. These bearings insure long wear 
and easy running—they keep the discs revolving freely. 
The hub and sleeve are full-chilled; the sleeve is remov¬ 
able and can be replaced at small expense when worn. 
The oil tube is provided with a hard oiler which forces 
the hard oil down into the bearing, keeping it running con¬ 
tinually in a bath of oil, causing easy running and long 
wear. 
Prices: 
Pony, single, 20-inch discs, without evener, with 3 
M293 wheels. $50.00 
Pony, double, 20-inch discs, without evener, with 3 
M293 wheels. 63.50 
Prices: 
With Spring Release Hitch and Comb, Rolling Colters 
and Jointers 
1442 Chilled, 24-inch cut.!.$118.50 
1442C Comb, 24-inch cut. 121.50 
1442S Comb, 24-inch cut. . . 125.50 
MP 212 Steel, 24-inch cut.127.00 
1441 Chilled, 28-inch cut.121.50 
1441C Comb, 28-inch cut. 125.50 
144IS Comb, 28-inch cut. 127.00 
1451 Chilled, 28-inch cut.127.00 
1451SC Steel, 28-inch 130.00 
MP314, 28-inch cut.125.00 
MP316 Steel, 32-inch cut. 132.50 
1450 Chilled, 32-inch cut. 127.50 
1450SC Steel, 32-inch cut. 132.00 
Chilled Jointers, instead of Comb, Rolling Colters 
and Jointers, deduct . 6.00 
Rolling Colters instead of Comb, Rolling Colters 
and Jointers, deduct. 4.00 
Comb, Rolling Colters and Jointers not taken, deduct 12.50 
Extension Rims, extra. 3.50 
No. 3 Landing Lever Attachment, extra. 5.50 
DISC PLOW 
No. 1, single, 24-inch discs, with 3-horse evener. 95.50 
No. 1, double, 24-inch discs, with 4-horse evener. 122.25 
No. 1, triple, 24-inch discs, with 4-horse evener 144.00 
26-inch discs instead of 24-inch on John Deere Disc 
Plows, add, per disc. 1-00 
Good Tools Make A Good Farmer Better 
