WISEMAN-DOWNS CO., INC. - 34 E. PRATT ST. - BALTIMORE, MD. 101 
STANDARD CARDEN TRACTOR 
WHY THE STANDARD TRACTOR 
In deciding on the purchase of a garden 
tractor, you will have to weigh all of the 
features of design and construction and 
compare their advantages to your present 
method of doing your work and you will 
have to decide on their adaptability to your 
particular requirements. In doing this, may we ask that 
you consider the Standard Tractor in the following light? 
1st—It is a quality machine. 
2nd—It has a 3% H. P. four-cycle engine. 
3rd—It is entirely dirt proof and automatically oiled. 
4th—It has large wheels—giving it a high clearance and 
easy operation over the ground. 
5th—It has an adjustable tread, that enables you to meet 
any particular row condition. 
6th—It can be supplied with a wide axle to give a tread 
of any width. 
7th—Its tools are adjustable in all directions. 
8th—It has the Compound Action Double Draw Bar. 
9th—It has an Independent Tool Control. 
10th—It is light—compact—sturdy. 
11th—Its weight is located properly to give the full benefit 
in traction. 
12th—It has an easily operated clutch and throttle speed 
control. 
13th—It has a differential for easy steering. 
14th—It has a low center of gravity. 
16th—It can work fast or very slow. 
16th—It is a machine, honestly and conscientiously built 
and every inside, unseen part is just as carefully 
made and as thoroughly inspected as the most out¬ 
standing feature on the surface. The Standard is 
quality construction clean through. 
Regular equipment of the Standard Tractor is: Field Lugs, 
Double Draw Bar, Special Tool Control, 2 Caster Wheels, 
Air Cleaner, 2 Front Tool Posts, 2 Rear Tool Posts, 
2 Straight Tool Posts, 6 Steels. All required clamps 
and bolts. For all other tools and attachments 
an additional charge is made. 
Guarantee 
The Standard Garden Tractor is unconditionally guaran¬ 
teed for one year against any defect whatsoever in material 
or workmanship. 
(Descriptive Catalogue and prices mailed on application) 
Specifications 
Capacity: One 16-inch or two 10-inch plows, 2-row 
planter or 2-row cultivator. 
Speed: First, 214; second, 3 1/3; third, 4%; fourth, 6%; 
reverse, 3% M. P. H. 
Crankshaft: Main bearings, 214 inches by 214 inches. 
Connecting rod bearings, 214 inches by 2 inches. 
Lubrication: Full force feed, pressure-geared pump with 
oil filter. 
Carbureter: Double-jet type. 
Air Cleaner: Wash down type with stack. 
Cooling: Tubular radiator, thermo-siphon. 
Air Fan: Gear driven, no belts; R. P. M. 1920; diameter 
1314 inches. 
Governor: Enclosed fly-ball type. 
WITH ADUSTABLE TREAD 
The Model B is an exact duplicate of the 
Model A, being approximately two-thirds its 
size. All of the features that make for prac¬ 
tical, row-crop tractor perfection and economy 
that have been demonstrated in the Model A 
are included in the Model B. The Model B is 
powered with a simple, rugged, two-cylinder 
engine which makes possible simplicity and 
economy not obtainable elsewhere. The tread 
is adjustable on the rear axles from 56 inches 
to 80 inches, with any desired setting in be¬ 
tween. You can adjust it to fit with exactness 
every row-crop job and other work on your 
farm. 
Burns Distillate 
It will successfully burn distillate, fuel oil, 
and similar low-cost fuels at a tremendous 
saving when compared with the cost of gas¬ 
oline or kerosene. 
Enclosed Operating Parts Automatically Oiled 
All of the important working parts are com¬ 
pletely enclosed within a dust-proof case. Oil 
reservoirs are provided in the case. Parts 
operating in oil carry oil to all other parts 
within the case, insuring thorough lubrication. 
Clutch: Two 8-inch dry disks locking in and out. 
Belt Pulley: 10%-inch diameter; 6-inch face; 1150 R.P.M. 
Belt Speed: Feet per minute, 3200. 
Transmission: Spur gear, selective type, four speeds for¬ 
ward, one speed reverse. 
Gears: Forged steel cut and heat treated. 
Fuel Tank Capacity: 12 gallon gas. 
Water Capacity: 514 gallons. 
Over-All Length: 122 inches. 
Width: 85 inches. 
Height at Top of Radiator: 56 inches. 
Turning Radius: 8 feet. 
Wheel Base: 80 inches. 
Engine Bore and Stroke: 414 inches by 514 inches. 
2,455 pounds. 
Weight: 
WRITE FOR PRICE 
