22 
HENRY F. MICHELL CO. GOLF EQUIPMENT 
HOLE 
“PERFECT” 
Style ST — Here is 
a sturdy hole cup 
made with rim of 
heavy gauge seam¬ 
less drawn steel tube, 
which will not bend, 
and fitted with the 
“Perfect” center, 
“MICHELL” 
Heavy galvanized 
sheet steel rim fitted w 
iron “Perfect” center, 
cup at a low price. 
CUPS 
Made entirely of 
aluminum with 
centers to fit spike 
or ferrule end, 
wood, bamboo or 
“Darbysteel” Flag 
Poles. 
The construction 
of this cup pre¬ 
vents the accumu¬ 
lation of mud and 
water, and the bot¬ 
tom slopes sharply 
toward the center; 
this automatically 
forces the flag pole 
into the center hole 
in an upright posi¬ 
tion—there is no 
other place for it 
to go. 
“DARBYSTEEL” 
h our standard cast 
A very substantial 
PRICES OF HOLE CUPS 
Each Set of 18 
“Perfect”.$3.00 $49.50 
“Darbysteel”. 1.75 28.50 
“Michell”. 1.00 16.25 
HOLE-CUP 
Rammer and Lifter 
In soil in which the cups have 
to be rammed into the hole this 
tool is very useful. Made of 
wrought and cast iron. 
Solid iron ramming head that 
will not damage the cup. Special 
hook on the handle simplifies re¬ 
moval of the cup when necessary. 
Price, $2.50. 
HOLE TRIMMER 
This tool is extremely useful to the Greens- 
keeper who does not use a Hole-Cutter 
board, as one or two turns in the hole after 
the cutter is withdrawn finish the lip and 
margin of the hole perfectly. The Trim¬ 
mer is very substantially made of the best 
cast-iron. Price, $3.25 each. 
HOLE RIM SHEARS 
Hole trimming shears, with curved blades 
for cutting around the hole and rims. 
Leather covered handles. $2.00 per pair. 
'‘Darbysteel” 
“Bogey” 
The “Darbysteel” cutter is made of heavy- 
gauge seamless steel tube, will not bend, 
chip or break. The cutting edge has 4 bevel 
sharpened teeth. Each cutter is fitted with 
an easy working turf expeller or knockout. 
Holes may be cut by working the cutter 
either to the right or left or all the way 
around. Price, $12.00 each. 
“Bogey Cutter”—An imported model, 
made of the best seamless steel with three 
cutting teeth, a point for centering and an 
ejector. Available with plain cutting edge 
also. Price, $12.00 each. 
TURF RENOVATORS 
For cutting out weedy or bare patches in 
turf to replace with a similar disk of good 
turf. Assures a perfect patching job. Same 
principle as the “Bogey” hole cutter, but 
made in various sizes. 
Each 
3-inch—Straight edge.$10.00 
414 -inch—Straight or serrated edge... 12.00 
6- inch—Serrated edge. 13.50 
7- inch—Straightedge. 13.00 
8y 2 -inch—Seiratededge. 15.00 
Divot Renovator—Cuts an oval piece of 
turf just the shape of a divot, $10.00. 
MICHELL POLE 
STANDARD 
This is the most practic¬ 
al and economical holder 
for use with plain bamboo 
or wooden poles. It is of 
our own design and is 
quickly and easily at¬ 
tached. Made of iron 
thoroughly galvanized; 
has a spring steel pocket 
to accommodate poles of 
varying thicknesses. The 
latter are held in position 
firmly in the standard by 
means of a clamp also 
galvanized. 75c. each. 
HOLE-IN-ONE 
POLE ENDS 
Made entirely of steel with tubu¬ 
lar pole socket, half-inch cold rolled 
steel pin and our standard flanged 
end. 
Bamboo,Wood, or Steel flag poles 
may easily be inserted or removed 
from the socket and the pole is firm¬ 
ly held in place by means of a single bolt. 
Price, each, $1.00 
GOLF FLAGS 
No. 2 No. 3 
Made of extra heavy bunt¬ 
ing, which will give [long 
service. All flags are fur¬ 
nished with white canvas 
headings, brass^.f grommets 
and tie tapes. 
Style No. 1. Numbered 
flags, 12” x 18”, numerals 
sewed on both sides. Can be 
furnished in any color com¬ 
bination desired with solid 
color background and con- 
No. 1 trasting colored numerals. 
Red with white numbers from 1 to 9 and 
white with red numbers from 10 to 18 are 
carried in stock. Other combinations made 
to order. Price, set of nine, $4.50. 
Style No. 2 & 3. Direction flags, 12” x 
18” available in any color combination. No 
numbers. $4.50 per doz. 
Style No. 4. Same as Nos. 2 and 3, but in 
solid colors, without number. $4.00 per doz. 
“DARBYSTEEL” 
FLAGPOLE (Ulus.) 
This “Darbysteel” Flagpole 
is practically indestructible, 
made of hollow drawn heavy 
gauge-enameled steel, 8 feet 
long, with a beautifully moulded 
spindle top with grooves for the 
flag ties and has the bottom 
formed to the shape of our 
famous “Hole-in-One” Pole end. 
$2.50 each. 
Sets of 18 or more, $2.25 each. 
“MICHELL” 
FLAGPOLE 
A sturdy pole of straight 
grain ash, standard eight foot 
length. The brass ferrule hole- 
end assures rigidity in the cup. 
Painted in wide alternate 
stripes of black, white and 
orange and equipped with a 
special swivel flag holder which 
prevents the flag from wrapping 
around the pole. In ordering 
poles with swivel, specify the 
width of the flag. 
Poles without swivel, $1.25 ea. 
With swivel, $1.75 ea. 
BAMBOO POLES 
Used extensively foi brushing 
worm casts off Putting Greens, 
also for Flag Poles. 
Doz. 100 
16 feet long.$2.25 $13.50 
18 feet long. 3.00 18.00 
20 feet long. 3.50 22.50 
ALL PRICES SUBJECT TO MARKET CHANGES 
