Protect Your Investment with Rok-Hesive 
The Perfect Coating 
For the repair and protection of expensive 
insulation on refrigeration and steam lines, also 
ideal for protecting bare lines exposed to atmos¬ 
pheric conditions such as salt air, acid fumes, etc. 
Do not confuse Rok-Hesive with ordinary 
pipe coatings. There is no other product on the 
market which will give you the long life and 
protection obtained with Rok-Hesive. 
Application on Insulated or Bare Lines 
Do not mix more Rok-Hesive than can be 
applied in 1 hour. Add slowly 10 pounds of Rok- 
Hesive powder to 1 V 2 quarts of cold water. Stir 
thoroughly while mixing, stir intermittently for 
a period of from 2 0 to 3 0 minutes, or until mix¬ 
ture has reached a creamy consistency. It is 
then ready for use. Clean lines of any excess dirt 
or corrosion. A cheap grade of muslin is recom¬ 
mended as a wrapper. Tear muslin into 4 or 6- 
inch strips; impregnate strips in Rok-Hesive. Be 
sure muslin is saturated with Rok-Hesive. For 
ease of applying also to straighten out strips, 
roll on wooden roller from mixture into size 
suitable for handling. Brush or rub on with 
hands, small amount of Rok-Hesive to surface 
to be covered. Then apply strips in a spiral 
wrap—using a 1 /3 lap. In 24 hours you will 
have a rock-hard, fireproof, waterproof coating. 
For Repairing of Holes or Cracks 
in Walks, Floor, or Walls 
Clean holes or cracks of any dirt or loose ma¬ 
terial—wet thoroughly with cold water. Cut 
edges of holes to at least a 1-inch depth. Mix 
Rok-Hesive in same proportions as for other uses, 
10 pounds to 1 % quarts of cold water—if larger 
mixtures are desired, be sure to use correct equiv¬ 
alents of Rok-Hesive and water. Stir until thor¬ 
oughly mixed. Let stand 20 to 30 minutes or 
until mixture has reached a creamy consistency. 
If you are repairing small cracks, material is 
now ready to use. Apply with brush—be sure 
cracks are completely filled. For use in holes or 
large cracks, after your mixture has reached its 
proper consistency— add slowly clean, dry, sand 
—mix thoroughly, until you have a troweling 
mixture. Fill holes or cracks, and trowel smooth, 
same as cement or plaster. If used for walks or 
floors keep traffic off for 12 hours. 
For Lily Ponds, Reservoirs, Fish Ponds 
and Swimming Pools 
Clean surface thoroughly, use wire brush if 
necessary to remove all dirt, algae or foreign 
substance. 
Follow directions on label closely as to mixture. 
Stir intermittently during period chemicals are 
dissolving. 
When mixture has reached a creamy consist¬ 
ency it is ready to apply. 
Two coats are recommended for best results. 
Wet surface thoroughly before applying Rok- 
Hesive. 
Let first coat stand 24 hours before applying 
second coat. 
Wet surface before applying second coat. 
Use a stiff bristle brush for applying. 
If you have cracks or holes in your structure, 
follow directions given on label for this use. 
If directions are followed closely you will have 
a job of beauty and permanence. 
All shipments express, collect, from factory in 
California or nearest distributor. 
Price: White, 2 3c lb.; colors, 27c lb. 
DISTRIBUTED BY 
SMILEY’S WATER GARDENS 
Seward, Nebraska 
