28 
SUPPLY PLENTY OF FEEDERS FOR BABY CHICKS 
Square Bottom Chick 
Trough 
WITH METAL Z REEL, 
Revolving metal reel prevents chicks roosting or get¬ 
ting into trough; reel adjustable to 3 positions; will 
feed day-old chicks or 8-weeks old; a real all-purpose 
feeder at a low price. 
Trough of 26-gauge galvanized steel is 4 inches wide 
and 2 inches deep; turned flanges along trough edges 
prevent feed waste. 
No. 342—2 ft. long, each_$ .40 
No. 343—3 ft. long, each_ .50 
No. 344—4 ft. long, each_ .05 
Oakes’ 
Inexpensive Chick Feeder 
This feeder is made in one size, 42 inches in length. 
Sloping top prevents roosting and slides off for filling 
or cleaning. V-shaped bottom throws feed toward the 
outside and prevents clogging. Has 68 feeding spaces. 
No. 375—42 inch, each__ _$2.00 
Winner Chick Trough 
Trough is made of heavy gauge galvanized steel; die 
stamped in one piece; holds either feed or water; turned 
flange along trough edge is folded—no sharp edge. 
Flange prevents feed waste. 
Revolving metal reel is “Z-shaped” for strength; will 
not warp or stick; prevents chick from roosting or get¬ 
ting into trough. 
Trough is l x / 2 inch deep, 2 y 2 inches wide at bottom 
and Sy 2 inches wide at flange upturn. A big value. The 
price is surprisingly low. 
No. 104A—12 in. long, each_$ .15 
No. 105A—18 in. long, each- .20 
No. 106A—24 in. long, each_ .25 
Oakes’ Capacity 
Chick Feeder 
Saves time, labor and feed for 
large flocks of chicks. Double 
feeding space with 25 feeding 
spaces on each side; 
wires extend into hop¬ 
per so that chicks in 
eating shake down the 
mash and prevent clog¬ 
ging; hinged lid on 
top; capacity 75 lbs. 
of mash ; length 48 in.; 
height 12 in.; width at 
bottom 11 in. 
No. 848—48-in. size, 
capacity 75 lbs., 
each _$4.00 
Oakes’ Chick Feed Troughs 
These troughs are ideal 
for feeding chick starter 
to baby chicks. Trough 
is stamped out of ODe 
piece of heavy galvanized 
steel without seams. Very 
easy to keep clean. The 
grate is a separate piece 
and slides on and off 
easily. Prevents waste of 
feed. Made of galvanized steel for dry feed and heavy 
charcoal tin for feeding milk. 
MASII FEEDER 
No. 71—Galvanized, 10-inch, each_$ .15 
No. 72—Galvanized, 20-inch, each_ .25 
No. 71A—Tin, 10-inch, each_ .25 
No. 72A—Tin, 20-inch, each_ .40 
Oakes’ New Chick Troughs 
A new inexpensive chick trough. Made of galvanized 
Iron with galvanized cross wire welded on. Ends are 
soldered on so that trough can be used for either feed 
or water. Easy to fill and clean. Cross wire prevents 
chicks from getting into trough or soiling feed. 
No. 5120—18-inch, each_$ .25 
No. 5124—22-inch, each__ .30 
Oakes’ Feeders for Growing 
Chicks 
Oakes’ 
Growing Chick Feeder 
This new feeder is decidedly popular in all parts of 
the country for feeding dry mash and all kinds of 
ground feed to growing chicks and mature fowls. 
rills from the top. Feed flange can be raised or 
lowered to feed either fine or coarse feed. Feed can¬ 
not be thrown out and wasted. Cannot clog, as all feed 
is forced out under the openings by the V-shaped bot¬ 
tom. Chicks feed from both sides. Lid is hinged. 
Tippler prevents roosting on top. 
No. 29—Length 35 inches_$2.00 
No. 30—Length 42 inches_2.50 
Made of steel, 4 feet in length, capacity about 12 qts. 
Wires 2 inches apart prevent fowls getting into trough. 
No. 6A —Without lid, each_$1.20 
No. 50—2 gal., each 
Bottom Filled 
Fountain 
Consists of a cone-shaped can 
and a stamped pan, which forms 
trough from which the fowls drink. 
Both parts made of galvanized sheet 
metal and well soldered. 
No. 78—1 qt., each 25c_$ .19 
No. 79—2 qts., each 35c_ .25 
$1.25_ .75 
