88 DUSTERS AND PRUNING TOOLS 
American Beauty Duster 
Suitable for row crops or orchards. Will 
dust trees up to 25 feet in height. Weight 
16 pounds. Holds 15 pounds of dust. 
Price $20. 
The I. W. Scott Company, Pittsburgh, Pa . 
California Beauty Duster 
The very Duster for truck crops, such as 
potatoes, peas, beans, cabbage, etc. There 
are no rapidly revolving parts to give trouble. 
Weight 11 pounds. Holds 12 pounds of dust. 
Price $14. 
Platz 
Double-Action 
Duster 
The double bellows 
insures a steady flow of 
dust, and is better 
adapted for dusting a 
denser growth of foli¬ 
age. The 44-inch dis¬ 
charge pipe, with its 
adjustable spreader, is 
sufficiently long to 
dust the underneath 
side close to the 
ground, as well as 
to throw a cloud of 
dust 20 feet in the 
air. Weight 
17 pounds. 
Capacity 20 
to 30 pounds. 
Price $22. 
Bartlett Tree Trimmers 
No. 1 -RJ Compound Lever Type. Built for heavy work and will cut a limb up to 
i }4 inches in diameter. Rod connects the knife lever along one side of the pole to the 
handle lever on the opposite side, which allows the rod to cross the pole and results 
in half of the strain on each side of the pole, giving about double strength. 
This is a jointed pole pruner and has several advantages over a solid pole type of 
pruner. Sections are joined by means of brass sleeves making the tool perfectly rigid. 
8-ft., 2 sections, $6.50; 12-ft., 3 sections, $ 7.25; 16-ft., 4 sections, $8, postpaid. 
No. 1 -W Pulley Type. Furnished with jointed pole. Has rope-operated cutting 
head. Each section is 4 feet long and equipped with brass sleeve body on one end 
and brass ferrule on opposite end. As many of the lower sections can be used as 
desired. An ideal pruner for use near high-tension power lines. 4-foot top section 
$7; extra 4-foot sections, each $3, postpaid. 
No. 44 Bartlett Pole Saw 
Intended for use where the limbs are larger than the capacity of the No. i-RJ or No. 
i-W. The saw blade is 16 inches long and securely held by the head, which is stamped 
from cold rolled steel and fastened to the pole by three bolts. The blade can be adjusted 
to three angles to suit the operator’s position. 4-ft. Jointed Pole Saw with brass ferrule attached, $4.10; 
4-ft. sections, each $3. 8-ft. Solid Pole Saw, $4.40; 10-ft. Solid Pole Saw, $4.70; 12-ft. Solid Pole Saw, $5. 
Clyde Tree Trimmer 
No. 5407 . Blade and hook are made from the best tool steel, firmly riveted to selected basswood 
handle. The blade is held open by means of a coil spring from the lever handle to the pole. A well-made 
No. 1-W Trimmer at a low price. 8-ft., $2; 10-ft., $2.25; 12-ft., $2.45; 14-ft., $2.65. 
No. 1-RJ 
No. 5407 
Porter HKP. Forester 
Patented slide shift gives amazing multi¬ 
plication of cutting pressure. No strain on 
tool or operator. Cuts close up, two sharp 
cutting blades. 
No. 1. For average pruning. 20-in.. ..$5 00 
No. 2 . For general farm and orchard 
work. 27-in. 6 00 
No. 3. For brush clearing and heavy 
pruning. 34-in. 7 00 
Porter HKP. Pointcut Pruner 
The blades are so designed that suckers 
are cut on the point with minimum handle 
opening and limbs up to 1 % inches in diam¬ 
eter with full handle opening. It is in reality 
two tools in one. 
No. 4. 20-in. $5 00 
No. 6 . 27-in. 5 20 
Forged from special steel and tempered to 
stand the strain and hold a keen edge. Put 
together with a heavy rivet under tremendous 
pressure, no nuts to work loose. 
No. 777 Bartlett 
Tree Pruner 
A Pruner designed on scien¬ 
tific principles and built to 
stand up to the work. The 
blade positively will not cut or 
dig into the hook. Both blade 
and hook are hardened drop 
forged crucible tool steel. Han¬ 
dles white ash, 26 inches long. 
$3.85. 
Clyde Hand Pruner 
An excellent tool for an occa¬ 
sional job and where a profes¬ 
sional Pruner is not required. 
Blade and hook hammer forged 
from carbon steel, hardened 
and tempered. Ash handles 
securely held to head by two 
rivets. $1.25. 
FOR TREE PAINT, SEE 
PAGE 72 
