Poultry Supplies 
Chick Feeder 
A value leader. The trough of heavy prime 
galvanized is die-formed, for feed or water. Su¬ 
perior tumble guard of exclusive design, enameled 
red. Trough 3)4 inches wide and 1)4 inches 
dee P- Each 
H6-310. 10 in. long.$0 12 
H6-320. 20 in. long. 25 
Chick Feeder 
with new end-plates 
having a 2-inch adjustment. Perfectly pro¬ 
portioned to. keep feed in, chicks and litter out. 
Trough 3 24 inches wide, 2 inches deep, with ad¬ 
justable metal reel. Each 
H6-424. 24 in. long, adjustable ends.$0 45 
H6-436. 36 in. long, adjustable ends. 55 
One-Piece Feeder 
Width, 324 inches; depth, 2 inches; non-wast¬ 
ing flanged edge is )4 inch wide. The tumble-bar 
has two positions. 
Very close to perfection. Die-drawn and 
folded into a water-tight Feeder. Ends are 
tightly closed. Has almost vertical walls. 
Each 
H6-324. 24 in. long.$0 35 
H6-336. 36 in. long. 45 
Long Boy Feeder 
The Long Boy trough is 1024 inches wide and 
524 inches deep. It has a “V” center so that 
mash will be eaten down to the last bill-full and 
we build it of heavy (26-gauge) galvanized steel 
with welded ends. The heavy wire grid-guard is 
of special design which discourages roosting. 
Its perches are comfortably wide (3)4 inches) 
and are of 1-inch clear fir. The stand members 
are heavy angles and the assembly will easily 
support a load of 400 pounds. The perch is 
16 inches off the floor. Total height, 26 inches; 
total width, 24 inches. 
H6-105. 5 ft. long.$4 80 
H6-108. 8 ft. long.6 90 
The latest in Broiler or Turkey Feeders. 
Turkeys don’t like reel guards, so this has a 
welded wire grid with non-roosting edge (Pat. 
App.) of extra-heavy (26 ga.) prime galvanized, 
with die-formed welded ends and big trough 
6 inches wide by 3)4 inches deep. The folded and 
wide-flanged edge is turned downward for less 
feed-waste. The heavy wire legs adjust quickly 
and securely without wing nuts (Patented) to a 
floor clearance of 4)4 inches. Each 
H6-2030. 30-in., holds nearly 9 qts.$0 90 
H6-2048. 48-in., holds nearly 14 qts. 1 65 
H6-2058. 48-in., with reel. 1 65 
Flock Feeders 
There will always be a demand for a good- 
looking, good-capacity Flock Feeder at lowest 
prices. This we offer in the Flock Feeder shown 
above. It is similar to the Long Boy Feeder 
shown opposite, but of lighter construction, yet 
sturdily built of heavy-gauge steel channels and 
angles. Troughs are 9 inches wide and 424 inches 
deep. It is 26-gauge galvanized iron. Earh 
H7-94. 4-ft. Feeder.$2 95 
H7-95. 5-ft. Feeder. 3 30 
H7-98. 8-ft. Feeder. 4 95 
Feeder.$1 00 
H6-536. 36-in. Galvanized Feeder. ... 75 
H6-548. 48-in. Galvanized Feeder. ... 1 00 
All-Age Chick Feeders 
Many call these the best, most in¬ 
genious style of adjustable legs (Pat. 
App. For). They adjust easily to four 
positions; have no thumb-nuts or tight- 
fitting slides, and may be quickly re¬ 
moved. The red-enameled, 4-vane reel 
has two positions, rolls on brass pins. 
Chick Feeder sizes: these are 424 hy 
2)4 inches, with wide flanged edges; 
larger than many. 
7 4 Poultry Supplies 
W. E. BARRETT CO., Providence, R. I 
