30 
SUPPLY PLENTY OF FEEDERS FOR BABY CHICKS 
Winner Chick Trough 
Trough is made of heavy gauge galvanized steel; die 
stamped in one piece; holds either feed or water; turned 
flange along trough edge is folded—no sharp edge. 
Flange prevents feed waste. 
Revolving metal reel is “Z-shaped” for strength; will 
not warp or stick; prevents chick from roosting or get¬ 
ting into trough. 
Trough is 1 y 2 inch deep, 2 y 2 inches wide at bottom 
and 3y 2 inches wide at flange upturn. A big value. The 
price is surprisingly low. 
No. 104A—12 in. long, each_$ .15 
No. 105A— IS in. long, each--- .20 
No. 106A—24 in. long, each- .25 
Oakes’ New Cliick 
For starting 
feeding the first 
Metal Z reel is 
two positions. Re 
vent roosting. 
Trough is 1% in. 
•deep and 3% in. 
wide. Smooth 
turned flange to 
prevent waste of 
feed. Made 
heavy gauge 
vanized steel. 
Oakes’ Cliick Feed Troughs 
These troughs are Ideal 
for feeding chick starter 
to baby chicks. Trough 
is stamped out of ODe 
piece of heavy galvanized 
steel without seams. Very 
easy to keep clean. The 
grate is a separate piece 
and slides on and off 
easily. Prevents waste of 
feed. Made of galvanized steel for dry feed and heavy 
charcoal tin for feeding milk. 
MASH FEEDER 
No. 71—Galvanized, 10-inch, each_$ .15 
No. 72—Galvanized, 20-inch, each_ .25 
No. 71A—Tin, 10-inch, each_ .25 
No. 72A—Tin, 20-inch, each_ .40 
Oakes’ Cliick Trough 
A new inexpensive chick trough. Made of galvanized 
iron with galvanized cross wire welded on. Ends are 
soldered on so that trough can be used for either feed 
or water. Easy to fill and clean. Cross wire prevents 
chicks from getting into trough or soiling feed. 
No. 5120—lS-inch, each_$ .25 
No. 5124—22-inch, each__ .30 
Oakes’ Inexpensive Chick 
Feeder 
No. 107 — 12 inches, each _ $ .20 
No. 108—24 inches, each _ .30 
No. 109 — 36 inches, each _ .40 
Square Bottom Chick 
Trough 
WITH METAL, Z REEL 
Revolving metal reel prevents chicks roosting or get¬ 
ting into trough; reel adjustable to 3 positions; will 
feed day-old chicks or 8-weeks old; a real all-purpose 
feeder at a low price. 
Trough of 26-gauge galvanized steel is 4 inches wide 
and 2 inches deep; turned flanges along trough edges 
prevent feed waste. 
No. 342 — 2 feet long, each _ $ .40 
No. 343 — 3 feet long, each _ .55 
No. 344 — 4 feet long, each _ .70 
Oakes’ Feeders for Growing 
Chicks 
Made of steel, 4 feet in length, capacity about 12 qts. 
Wires 2 inches apart prevent fowls getting into trough. 
No. 6A — Without lid, each_$1.20 
POULTRY FLOCKS should always have a good 
pasture available. We have many items of seed that 
make an ideal pasture, such as Chicken Lettuce, 
Rape, Alfalfa and many grains. 
This feeder is made in one size, 42 inches in length. 
Sloping top prevents roosting and slides off for filling 
or cleaning. Y-shaped bottom throws feed toward the 
outside and prevents clogging. Has 68 feeding spaces. 
No. 375—42 inches long, each_$2.00 
Wire Guarded Chick Feeder 
With Adjustable Wire Guard 
This feeder will accommodate a large number of chicks 
at one time. The open trough principle is featured in 
this feeder. It accommodates a larger number of chicks 
at one time than a covered trough with individual feed¬ 
ing holes. The wire bar extends the full length of the 
trough. Adjustable up and down to regulate the width 
of the feeding space from chick size to pullet size. 
Inverted V-bottom throws all the feed forward into 
the trough and prevents it from gathering in the center 
and becoming stale. Hinged lid makes it easy to clean 
and fill. The tilting device prevents roosting on top. 
No. 634 — 35 inches long, 18-qt. capacity, shipping 
weight 10 lbs., each ____ $2.00 
TO PRODUCE BETTER MILK AND CREAM 
STERILIZE ALL DAIRY UTENSILS. 
SAVES TUVfE 
" IV AND LABOR 
Kills the bacteria on utensils immediately—fast 
working and effective. 
(See page 44 for Prices) 
