The /. W. Scott Company, Pittsburgh, Pa 
plows 89 
OLIVER CHILLED PLOWS 
The Oliver Chilled Plows need no introduction to the Pennsylvania farmer. We have space to show but a few of the leading favor¬ 
ites among Pennsylvania farmers, but will send a complete catalogue on request. A full line of genuine Oliver repairs always in stock. 
This is the veteran Plow of the Oliver line and for many years it 
has been familiar to a majority of the farmers in America. Its great 
capacity, steady running and turning qualities, make it valuable in 
sandy or alluvial lands, and on farms containing a variety of soils. 
It will turn a furrow 9 x 16 inches. Weight of Wood-Beam, 138 lbs.; 
Steel-Beam, 157 lbs. 
Price, Wood- or Steel-Beam, Plain, $23.10. For Wood-Beam, 
Wheel extra $2.40; Jointer extra $3.75. For Steel-Beam, Wheel 
extra $2.25; Jointer extra $4.75. 
Oliver No. 513 Hillside, Steel-Beam Plow 
This Plow has a distinctive design to the moldboard. It is recom¬ 
mended for conditions where scouring is difficult—the moldboard 
being short and with sufficient curvature to effectively turn the soil. 
It is well adapted for plowing sod as well as stubble. Chilled bottoms, 
trussed steel beam, strong wood handles make this a very serviceable 
Plow. Bottoms are long, insuring steadiness and ease of handling. 
Capacity, 8 x 15 inches. Weight, 160 lbs. Price, Plain, $24; Wheel 
extra $1.65; Jointer extra $3.30. 
Prices of other Oliver Chilled Plows 
Capacity 
Weight 
Wheel Jointer 
Capacity Weight 
Wheel Jointer 
No. 
Beam 
Hand 
inches 
lbs. 
Plain 
Extra 
Extra 
No. 
Beam 
Hand 
inches 
lbs. 
Plain 
Extra Extra 
BN. 
Wood 
Right 
5 x 10 
71 
$13 40 
$1 65 
$3 30 
84. 
Steel 
Right or Left 
8 x 16 
158 
$23 50 
$2 25 $4 75 
10N. 
Wood 
Right 
5K x 11 
74 
15 50 
1 65 
3 30 
153. 
Trussed Steel 
Hillside 
5 x 8 
70 
15 40 
1 65 
E1N. 
Wood 
Right or Left 
7 x 14 
132 
23 85 
2 40 
3 75 
512. 
Trussed Steel 
Hillside 
8 x 13 
139 
23 50 
1 65 3 30 
83N. 
Steel 
Right or Left 
7 x 14 
146 
21 50 
2 25 
4 75 
SPECIAL CIRCULARS OF ANY OF ABOVE PLOWS MAILED ON REQUEST 
Vulcan Chilled Plows 
The Vulcan Chilled Plow has been manufactured for more than a half century and is considered by many users as the best Chilled 
Plow manufactured. They are equipped with ribbed moldboards, which act as strengthening braces, and corrugated points, which it 
is claimed will outwear ordinary points and also hold a cutting edge a greater length of time. 
Capacity 
Weight 
Wheel Jointer 
Capacity Weight 
Wheel Jointer 
Beam 
Hand 
inches 
lbs. 
Plain 
Extra 
Extra 
Beam 
Hand 
inches 
lbs. 
Plain 
Extra 
Extra 
No. 
10. 
Wood 
Right 
6x11 
83 
$17 25 
$1 65 
No. 14. 
Steel 
Right or Left 
8 x 14 
155 
$22 80 $1 65 
$5 25 
No. 
13. 
Wood 
Right or Left 
8 x 13 
127 
21 85 
1 65 
$4 70 
No. 10. 
Steel 
Hillside 
7 x 10 
112 
19 40 
1 65 
5 75 
No. 
14. 
Wood 
Right or Left 
8 x 14 
135 
22 50 
1 65 
4 70 
No. 12. 
Steel 
Hillside 
8x 12 
143 
25 25 
1 65 
5 75 
No. 
13. 
Steel 
Right or Left 
8 x 13 
145 
21 85 
1 65 
5 25 
Wiard Road or Contractor’s Plows 
No. 64. A light Plow intended for road-repair work. It has excellent turning qualities and will 
hang to the ground on a hard and difficult job. Weight, 160 pounds. Price, with steel beam, 
shoe and forged steel point, $44.55. 
No. 65. A medium-weight Plow intended for general contracting work. Weight, 200 pounds. 
Price, with cast-iron beam, cast-iron point, $35.20; with forged steel point, $40.70. No. 65, with 
steel beam and forged steel point, $56.40. 
No. 69. Intended for use with either animal power, tractor, or road-roller. For all road or con¬ 
tractors’ work—for tearing up cobble-stones and macadam—it can be used as a rooter Plow 
by simply removing the steel wing below the moldboard—thus making a two-in-one Plow 
for all-round work. Weight, 315 lbs. Price, with steel beam, and forged steel point, $73.70. (Shoe for end of beam included at prices 
quoted on all Plows.) 
Wiard No, 32 Tractor Plow 
TWO BOTTOM OR SINGLE BOTTOM 
This Plow is constructed with an idea to simplicity, efficiency, and strength. The number 
of parts has been reduced to a minimum, knowing that with few parts making all necessary 
adjustments a standard of desirability in Plow construction has been attained. 
Ease of draft, smoothness of furrow, and durability of Plow are unexcelled. There 
is a good easy turn to the moldboard but it puts the furrow over, covering all 
vegetation, manure, or trash of any kind. 
The Plow is equipped with safety-spring trip-hitch, assuring safety to Plow, 
Tractor, and operator. Operating levers are easily reached from the Tractor seat 
and adjustment made without difficulty with one hand while plowing. Weight of 
two bottom Plows, 650 lbs.; weight of single bottom Plow, 485 lbs. 
PRICES 
Two Bottom; capacity, 24 to 28 inches wide, 5 to 9 inches deep 
With chilled bottoms, combined rolling colters and jointers.$107 80 
For steel moldboards instead of chilled, add. 3 30 
For jointers instead of combined rolling colters and jointers, 
deduct. 8 80 
Single Bottom; capacity, 16 to 18 inches wide, 6 to 10 inches deep 
With chilled bottom, combined rolling colter and jointer.$91 60 
For steel moldboards instead of chilled, add. 1 65 
For jointer instead of combined rolling colter and jointer, 
deduct. 4 40 
