R.-H. Co/s Chick, 
Broiler and Hen Feeders 
R.-H. Co.'s Winner Chick Trough 
Metal Z-shaped revolving reel. Trough one piece, die stamped 
1% in. deep; 2% in. bottom width; 4 in. top width. Turned flange 
aiong edge prevents feed waste. 
No. 104—Feeder, 10 in. long, each 10c; by mail 20c. 
No. 105A—Feeder, 18 in. long, each 20c; by mail 30c. 
No. 106A—^Feeder, 24 in. long, each 25c; by mail 35c. 
R.-H. Co.'s Utility Chick Trough 
For chicks, day-old 
to 5 or 6 weeks. Ad¬ 
justable metal "Z" 
reel. Trough 1% In. 
deep; 3% in. wide; 
flange along edge 
prevents waste. 
Square bottom. A 
real value. Heavy 
gauge galvanized. 
No. 107—Feeder, 12 in., each 15c; mailed 25c. 
No. 108—Feeder, 24 in., each 25c; maUed 40c. 
No. 109—Feeder, 36 in., each 35c; mailed 50c. 
R.-H. Co.'s Perfection Chick Trough 
For chicks day old to 8 weeks. Extra heavy galvanized steel 
trough; welded ends; 4-blade metal reel revolves, adjustable 3 
positions. Trough 4 in. wide; 2 in. deep. Turned flange along 
trough edge. Adjustable legs. 
No. 342 Ij—C hick Feeder—24 in., each 50c; by mall 65c. 
No. 343Ii—Chick Feeder—36 in., each 65c; by mail 80c. 
No. 344Li—Chick Feeder—48 in., each 80c; by mall $1.00. . 
R.-H. Co.'s New Gro-Fast Feeder 
New STREAMLINE 
design. Round edge pre¬ 
vents feed clogging. 
ALL-PURPOSE trough. 
For day old chicks or 
pullets. Large revolving 
4-blade reel adjustable 
to 3 positions. Legs ad¬ 
justs height of trough as 
chicks grow. 
Trough of 26-ga. gal¬ 
vanized steel; depth 2% 
in., width 5 in. Peed 
capacity: 3 ft., 7 qts., 
4 ft., 9 qts. mash. 
No. 233N—Gro-Fast Feeder, 3 ft. long, each 85c; by mall $1.10. 
No. 234N—Gro-Fast Feeder, 4 ft. long, each $1.00; by mall $1.30. 
R.-H. Co.'s O.K. Broiler Feeder 
Roost Proof Grill, Adjustable Legs 
STREAMLINE trough of 26-ga. galvanized steel, 3 in. deep. 6% 
in. wide; welded Aids, turned flange prevents waste. ADJUST¬ 
ABLE LEGS to raise trough out of litter as chicks grow. Hinged 
wire grill, spacing 1% in. For chicks 3 weeks and older. Fine for 
starting turkey poults. Capacity 12 qts. 
No. 3942W—Broiler Trough, 42 in. long, each $1.35, mailed $1.65. 
R.-H. Co.'s Dandy Broiler Feeder 
Similar to No. 3942W feeder, described above, excepting it has 
solid metal support in place of the legs, large capacity, 6% inches 
wide at top, 3 inches deep with full 1-lnch feed-saving lip, wire 
grills are 1% inches apart, which are hinged, making filling or 
cleaning a very convenient task. 
No. 730H—30 Inches long, each.$0.85; by mall, $1.15 
No. 748H—48 inches long, each. 1.20; by mail, 1.50 
R.-H. Co.'s Streamline Hen Feeder 
Newly designed trough with 
rounded bottom edge. No corn¬ 
ers for feed to lodge and be¬ 
come stale. Eliminates enough 
feed waste to pay for itself in 
a few months. Almost as low 
cost as a home made wooden 
feeder trough and much more 
sanitary. 
Trough 4% in. deep, 9% in. 
wide, with feed opening 7 in. 
Heavy gauge galvanized steel. 
Hinged wire grill, spacing 2% 
in. Wood perch 16 in. high. 
Sturdy legs of angle steel sup¬ 
port body. Turned flange pre¬ 
vents feed waste. We recom¬ 
mend 2—6 ft. or 1—8 ft. for 
100 hens. Cannot be mailed. 
No. 866—Flock Feeder, 5 ft. long, wt. 26 lbs., each $3.80. 
No. 896—Flock Feeder, 8 ft, long, wt. 36 lbs., each $5.45. 
Above not mailable. 
R.-H. Co.'s Streamline Feeder for Growing 
Chicks, Pullets or Hens 
Same dimensions as above. Angle steel 
legs 9 in. long bolt to side—raise trough 
out of litter. Edge of trough adjustable 
from 7% to 9% inches from floor. Hinged 
wire grill lifts for easy filling or cleaning 
of trough. 
Hens EAT MORE PEED from this low 
trough and therefore lay more eggs. This 
trough is cheaper than any home made 
feeder. Makes an ideal starting trough 
for turkey poults. A good range feeder. 
A Super Value. High quality, heavy gauge 
galvanized steel trough. 
No. 860T—Floor Feeder, 5 ft., capacity 4 pks., each $2.80. 
No. 896T—Floor Feeder, 8 ft., capacity 7 pks., each $3.90. 
Above not mailable. 
R.-H. Co.'s Growing Chick Feeder 
No. 536H. Has adjustable metal support and four-blade enamel 
reel, square bottom, feed trough 2y2 inches deep, 5 inches wide, 
36 inches long. Each, 65c; by mail. 90c. 
No. 336H. Round bottom trough with stationary metal support 
and adjustable reel, 4 Inches wide, 2 Inches deep, 36 inches long. 
Each, 40c; by mail. 55c. 
Pans and Guards for Feed or Wafer 
Two sizes for growing fowls or hens. 
Ideal for pigeons. Pans have soldered 
bottoms; water tight. 4 in. deep. 
Wire guards welded to cone top. Pre¬ 
vents birds crowding when feeding or 
drinking. 
PANS ONLY 
No. 6140—14 in Pan only; each 65c; by mail 80c. 
No. 6170—17 In. Pan only; each 80c; by mail $1.00. 
WIRE GUARDS ONLY 
No. 614—14 Vi in. Guard, each 50c; by mail 70c. 
No. 617—17 in. Guard, each 56c; by mail 80c. 
Green Ink List Enclosed 
£77} 
RUSSELL-HECKLE 
