WISEMAN-DOWNS CO., INC. - 34 E. PRATT ST. - BALTIMORE, MD. 
93 
ROUGHAGE MILLS 
HAY CHOPPERS 
SILO FILLERS 
The No. 230X LETZ is for the dairyman milking 
10 to 20 cows, or the stock farm feeding 20 to 50 steers, 
100 to 300 lambs, or 50 to 200 hogs. 
With power saving grain separator, No. 230X 
LETZ is the right size for light tractors, 8-16 or 10-20 
horse power, 10-15 horse power electric motors or 4 to 
6 cylinder engines equipped with Letz power take-off 
attachment. It may be operated by 10 horsepower 
single phase motor, using 8 inch instead of 10 inch 
grinding plates. The cost of a Letz is spread over 
many more profitable feed preparing jobs, such as 
chopping and storing alfalfa or clover hay, silo filling, 
20 to 30% added tonnage, chopping and storing soy 
bean or cowpea hay, grinding and storing grain* 
making molasses, feeds, etc. Specifications on Page 
94. Prices on application. 
No. 230X Letz with Grain Separator and Sacking Tower 
Equipment 
The No. 330 Letz with Grain Separator and Standard 
Feed Table 
Think of the new Letz with grain separator and 
finger feed as a “feed mill combine.” Think of its 
ability to chop and store one feed crop after another. 
From field to mow, alfalfa or clover, hay, sheaf oats, 
cured fodder, cowpea or soy bean hay, hay-fodder 
mixtures like one half bundle sorghum, one-half dry 
hay. To fill trench or tower silo and grind grain. 
Think of the modern Letz as the only complete feed 
preparing machine. 
Use it to save work. To reduce feed handling, pre¬ 
paring and storing costs. To increase profits by lower¬ 
ing feed costs. 
Built with standard crawler type feed table with 
three forward speeds and a reverse, or with finger 
table. Takes average size bundles, one after another, 
without cutting bands or clogging. 
No. 330 is built with the powerful Letz cutterhead, 
12" in diameter x 12" wide, mounted on 3 j/g" diameter 
alloy steel main shaft. Equipped with 12 new Tufedge 
knives that cut 35 to 75 tons of feed before resharpen¬ 
ing. 
Smaller plates, 10" in diameter instead of regular 
103 ^" plates, may be used and this size operated to 
good capacity by a 10 or 15 horsepower electric 
motor or 6 cylinder engine. 
Specifications on Page 94. Prices on Application. 
Send For Special Catalogue 
