The L W, Scott Company, Pittsburgh, Pa, milking machines and shearing machines 115 
HINMAN PIPELINE MILKER 
The Hinman “10 Star” Milking Unit 
The simplest and easiest to clean of all popular Pipeline Milking Machines. It embodies 
the latest improvements in design—the result of many years of development and manufac¬ 
ture of Milkers. The Hinman “10 Star” Milking Unit can be used on any pipeline. 
The teat-cups positively stay on without a surcingle; snappy relief is effective through 
squeeze of one-piece rubber-lined 
cups. New visible milk-flows; auto¬ 
matic vacuum shut-off at milk- 
claw; and a timer mechanism that 
has been in constant operation for 
more than three years, perfected in 
every detail. 
Standard equipment includes a heavily tinned 
18-quart pail with sturdy jug-type handle. A seam¬ 
less, non-rusting aluminum pail can be had at an 
additional cost. 
The New 
Hinman Power Unit 
“10 Star” Milking Unit 
A completely assembled unit—motor and pump 
are direct connected. No belts required; no complicated parts to oil; no 
tank that is hard to clean. All these difficulties are swept aside by the com¬ 
pact Hinman Power Unit with visible automatic lubrication. Furnished 
with either Electric Motor or Gasoline Engine. 
The New Hinman Power Unit 
Ask for price-list and complete details of this latest improved Milker before you buy any Milker 
Stewart Clipping and Shearing Machines 
Latest Model 21 Clipmaster 
New Improved No, 31 Shearmaster 
Clips Cows, 
Horses, and 
Mules 
Has new motor with 
ball-bearings instead of 
bushings that develops nearly 
double the speed and power of 
former models. Air cooled by 
enclosed fan. Shock-proof com¬ 
position handle—no ground wire 
to bother with. New ball-bear¬ 
ing tension enables blades to 
stay sharp longer. The latest of 
the famous Stewart Clippers. 
For any 110-volt current, AC or DC, complete 
with 20-foot rubber-covered cord. 
No. 21. $17.95. 
Same as above, for 32-volt direct current. 
$19.95. 
New improved motor in handle Electric Shearing 
Machine. Motor develops nearly double speed and 
power of former models. Ball-bear¬ 
ings instead of bushings. Improved 
E-B tension control. Easy-grip 
handle just 2 inches in diameter. 
Designed for sheep or goats but can 
be used for clipping by chang¬ 
ing the bottom blade or 
comb for No. 4-HC clip¬ 
ping blade listed below. 
For 110-volt current, either 
AC or DC, complete with 
2 combs, 4 cutters, and 20-foot 
special rubber-covered cord. 
No. 31. $22.95. Same as above, for 32-volt current. $24.95. 
SHEARING MACHINES ARE FOR SHEARING SHEEP OR GOATS—CLIPPING MACHINES FOR COWS, HORSES, AND MULES 
Stewart opE^TED Clipping 
and Shearing Machine 
For Clipping—No. 1 
Where electricity is not available, this is the 
most satisfactory Clipping Machine. Built 
sturdy and strong for years of use. Complete 
with 6-foot flexible shaft and chain, latest 
patented D-1 clipping head including one set of 
blades. Shipped complete, knocked down, in 
wooden box. No. 1. $13.45. 
For Shearing—No. 9 
Special gears make this Stewart Machine the 
easy way to shear sheep and goats. Universal 
jointed cog-driven shaft with light-running, ball¬ 
bearing No. 7 narrow handpiece complete with 
two combs, four cutters. Shipped complete. 
No. 9 knocked down, in wooden box. No. 9. $23.50. 
Extra Blades for Shearing 
No. 276. Three-tooth top plate or cutter for No. 9. 30 cts. 
No. 4-HA. Four-tooth top blade or cutter for Shearmaster. 35c. 
No. 277. Ten-tooth bottom blade or comb for No. 9. 80 cts. 
No. 4-HB. Nine-tooth bottom blade or comb for Shearmaster. 
75 cts. 
No. 4-HC. Bottom blade for Shearmaster; for use in clipping 
only. $1.50. 
Extra Blades for Clipping 
No. 360. Top blade for B-1 clipping head only. $1.35. 
No. 361. Bottom blade same as above. $1.85. 
No. 90. Top blade for C-1, D-1 or D-2 clipping heads. $1.35. 
No. 99. Bottom blade same as above. $1.85. 
No. E-1. Top clipping blade for J-1 and J-2 Clipmaster only. $1.35. 
No. E-2. Bottom blade same as above. $1.85. 
No. C-71M. Top blade for Model 21 Clipmaster. $1.35. 
No. 72-M. Bottom blade same as above. $1.85. 
