VIII 
ttERAMIC STUDIO 
The Revelation Kilns 
h. j. caulkins Especially Well Adapted for Glass Firing 
If you anticipate getting a new kiln do not 
fail to investigate the merits of the Revelation 
THEIR essential feature is the tubular system of fire-brick, by which the 
flame goes to every part of the kiln, ensuring an even temperature 
throughout. By this system there is a very thin wall of fire-brick be- 
tween the flame and oven. A non-conducting outside wall maintains the 
heat developed without allowing it to radiate into the room. 
The rounded surface of the tubes gives equal expansion and contraction, 
when subjected to high heats, so that the parts do not go out of shape or give 
way, which does occur in the case of flat tile or large pieces of brick. 
The most perfect device for a private studio or school work, as good 
chimney connection is all that is required for perfect operation, and the fuel, 
kerosene oil, is easily obtainable in all places. Its operation is so simple that 
a novice can meet with success from the start. 
M. C PERRY 
No. 6, the most popular size for general studio work, 
and No. 7 for professional and factory firing. These kilns may 
be arranged with a series of shelves to accommodate flat glass. 
This is our new No. 3 Round Kiln. 
The removable tubes by the door constitute the in- 
dividual advantage of this kiln, as they make a complete 
circle of flame about the oven. They may be used or not, 
at the will of the firer, but are especially desirable when 
an even, strong heat is necessary for certain classes of work. 
Our School Kiln No. 2 is built on the same plan as 
the one shown above, and is meeting with general favor. 
As a small combination kiln, for general studio and craft 
work, it cannot be surpassed. The lightest heat for glass 
and china may be developed, and it is also so constructed 
that it will fire to the higher heat required for modeled 
clay pieces, or pottery, as well as soft glazes. It has 
proved an admirable kiln for school work, and manual 
training departments. 
We also construct to order all sizes and shapes of 
kilns for all purposes requiring heat in manufacturing, for 
melting, enameling, fusing, testing, etc., both in the open 
flame and closed oven. 
The Revelation Kilns have been thoroughly tested by years of experience, both in studio ^oork and for la K 
manufacturing purposes. If you are not familiar <with their use <we take pleasure in referring you to any of the 
leading ceramic artists you may know in this country, Canada and many foreign countries. Send for one of our 
catalogues. 
H. J. CAULKINS & CO., LTD. 
MANUFACTURERS OF 
China Kilns, Enamel Furnaces, Dental and other High Heat Furnaces 
24 Gratiot Avenue, DETROIT, MICH. 
When writing to advertisers please mention this magazine. 
