42 
OLDS & WHIPPLE, INC., HARTFORD, CONN. 
John Deere—Syracuse No. 821 
Series Truss Steel-Beam 
Hillside Plow 
Ample throat room and close-fitting joints pre¬ 
vent clogging. Choice of white iron or tempered 
steel mouldboard adapts them to a variety of soils. 
Steel and malleable iron give maximum strength 
and imusual light weight. Two-piece truss-style 
beam is extra sturdy. Renewable shoe protects 
standard and serves as landside. 
825 Small, one horse 824 Medium, one horse 
823 Large, one horse 822 Medium, two horse 
821 Large, two horse Prices on Application. 
John Deere Universal Steel 
Lever Harrow 
mOune-'SX* 
The Universal is the ideal spike-tooth harrow 
for orchard or vineyard work because the end rails 
prevent the tooth bars from catching on trees or 
vines. A spring relief on each lever permits the 
harrow teeth to pass over roots, stones, or other 
obstructions without being damaged. We can 
furnish the Universl in one, two, three and four 
sections, with either 25 or 30 teeth to the section. 
Price on application. 
Syracuse Spring Tooth Harrow 
John Deere—Syracuse No. 31-32 
Series Walking Plow 
The mouldboard of hardened soft-center steel 
is formed so that a furrow may be turned smoothly 
up or down on sloping land. This feature makes 
Syracuse plows of this series popular in sections 
where the land is somewhat rolling. Steel landside 
of extra height, furnished with a cast shoe which 
can be renewed at slight expense. 
32^Medium, two horse 31 Large, two horse 
Prices on application. 
John Deere No. 4 Tractor Plow 
Its special-process, heat-treated spring steel teeth 
penetrate to a greater depth than any other type 
of harrow teeth. They tear out the weeds and 
leave the field smooth. The teeth are securely 
clipped to the tooth bars—no bolt holes to weaken 
them. We can furnish any number of sections you 
desire; also tractor hitch if you want it. 
Price on application. 
The strongest two-bottom tractor plow ever 
built. Beams, beam-bracing and other important 
parts are of the same great strength as similar 
parts "built into larger John Deere tractor plows. 
Heavy-duty, constant power lift raises bottom to 
a constant height regardless of depth of plowing. 
23-inch clearance from beams to share-points in¬ 
sures ' freedom from clogging. Rolling landside 
carries rear weight on greased bearing—no drag¬ 
ging landside friction. Furnished with 12, 14 or 
16-inch bottoms. For any farmer operating a 
‘two-plow” tractor, the No. 4 is a mighty satis¬ 
factory plow. 
24 in. Cut (1442S Bottoms) 
28 in. Cut U441S Bottoms) 
Prices on application. 
The Hi-Bar Weed Hog 
18 Tooth Weed Hog with chain hitch for tractor 
or horses. Width 7 ft. 6 in. Weight 355 lbs. 
Price on application. 
