29 
SATEX SEED CO MPANY — SAN A NTONIO, TE^S 
WINNER CHICK TROUGH 
Trough is made of heavy gauge galvanized steel; die stamped in one 
piece; holds either feed or water; turned flange along trough edge is 
folded — no sharp edge. Flange prevents feeding waste. 
Revolving metal reel is ‘’Z-shaped” for strength; will not warp or 
stick: prevents chicks from roosting or getting into trough. 
Trough is 1% inch deep, 2% inches wide at bottom and 3 1/2 inches 
wide at flange upturn. A big value. The price is surprisingly low. 
No. 104A—12 in. long, each _ $ .15 
No. 105A—18 in. long, each _ .20 
No. 106A—24 in. long, each __ .25 
ENFOLD CHICK TROUGH 
For starting chicks and feed¬ 
ing the first 6 to 6 weeks. Me¬ 
tal Z reel is adjustable to two 
positions. Revolves to prevent 
roosting. Trough is 
1% in. deep and 3% 
in. wide. Smooth 
turned flange to pre¬ 
vent waste of feed. 
Made of heavy gal¬ 
vanized steel. 
No. 107 — 12 inches, each___ $ .17 
No. 108 — 24 inches, each_ .25 
No. 109 — 36 inches, each__ .35 
SQUARE BOTTOM CHICK TROUGH 
WITH METAL Z REEL 
Revolving metal reel prevents chicks roosting or getting into trough; 
reel adjustable to 3 positions : will feed day-old chicks or 8-weeks old; 
a real all purpose feeder at a low price. 
Trough of 26-gauge galvanized steel is 4 inches wide and 2 inches 
deep: turned flanges along trough edges prevent feed waste. 
No. 342 — 2 feet long, each _$ .40 
No. 343 — 3 feet long, each _ .55 
No. 344 — 4 feet long, each _ .70 
GROWING CHICK FEED TROUGH 
Made of steel, 4 feet in length, capacity about 12 qts. Wires 2 
inches apart prevent fowls getting into trough. 
No. 6A — Without lid, each_$1.00 
waste of feed. Made of galvanized 
coal tin for feeding milk. 
CHICK FEED TROUGH 
These troughs are ideal for feed¬ 
ing chick starter to baby chicks. 
Trough is stamped out of one piece 
of heavy galvanized steel without 
seams. Very easy to keep clean. 
The grate is a separate piece and 
slides on and off easily. Prevents 
steel for dry feed and heavy char- 
MASH FEEDER 
No. 71 — Galvanized, 10-inch, each_ 
No. 72 — Galvanized, 20 inch, each _- 
No. 71A — Tin, 10, inch, each_ 
No. 72A — Tin, 20-inch, each 
ROUND BOTTOM CHICK TROUGH 
A new inexpensive 
chick trough. Made of 
galvanized iron with gal¬ 
vanized cross wire weld¬ 
ed on. Ends are solder¬ 
ed on so that trough can 
be used for either feed 
or water. Easy to fill and clean. Cross wire prevents chicks from 
getting into trough or soiling feed. 
No. 5120 — 18-inch, each_? *25 
No. 5124 — 22 inch, each- r .39 
CAPACITY CHICK FEEDER 
This feeder is made in one size, 42 inches in length. Sloping top 
prevents roosting and slides off for filling or cleaning. V-shaped bot- 
tom throws feed toward the outside and prevents clogging. Has 68 
feeding spaces. 
No. 375 — 42 inches long, each __$2.00 
WIRE GUARDED CHICK FEEDER 
This feeder will ac¬ 
commodate a large 
number of chicks at With Adjustable Wire Guard 
one time. The open 
trough principle i s 
featured in this feed¬ 
er. It accomodates a 
larger number of 
chicks at one time 
than a covered 
trough with indivi¬ 
dual feeding holes. 
The wire bar extends 
the full length of the 
trough. Adjustable up and down to regulate the width of the feeding 
space from chick size to pullet size. 
No. 634 — 35 inches long, 18-qt. capacity, shipping 
weight 10 lbs., each — 
$1.95 
GRO-FAST FEEDER 
ALL PURPOSE FEEDER 
The Gro-Fast Feeder 
Trough provides sanitary 
feeding conditions for chicks 
of all ages — from day old 
to broiler size. A wonderful 
all purpose feeder. The 
trough is heavy gauge gal¬ 
vanized steel with spot-weld¬ 
ed ends. Flaring sides in¬ 
crease feed capacity. Smooth 
double fold edges are turned 
in at just the right angle to 
prevent feed waste. Trough 
is 4^ inches wide at top edge, 3% inches at bottom. Depth 2% inches. 
The adjustable stand is made of heavy wire which slides up and 
down and is held in place by friction. The several corrugations in the 
end of the trough determine the different heights. Trough stays ^ set 
when adjustment is made. Trough is adjustable to 6 positions ; height 
at trough edges ranges from 2% to 6 inches. 
No. 233 — 3 feet long, each --$ *90 
No. 234 — 4 feet long, each _1-10 
GRILL TOP BROILER FEEDER 
A convenient and dur¬ 
able feeder for growing 
chicks. The galvanized 
wire grill is hinged and 
swings back for filling 
and cleaning. 
Trough is 6% inches 
wide and 3 inches deep. 
It is made in heavy gal¬ 
vanized iron or in bright 
charcoal dairy tin for 
milk feeding. 
No. 3942W — 42 inches long, galvanized, each 
(With Adjustable Legs) 
lia.334ZW 
$1.35 
NEW STREAMLINED CHICK TROUGH 
This series has rounded edge. No sharp corners for feed to lodge 
and become stale. Trough of 26 gauge galvanized iron, 4 in wide 
and 2 in. deep. Turned flange along trough edge to prevent feed 
waste. Reel adjustable to 3 positions. Complete with adjustable 
legs. 
No. 424 — 2 feet long_ $ .60 
No. 436 — 3 feet long- .70 
No. 448 — 4 feet long _ .85 
