SAW ACCESSORIES 

Jointer for Roberts Speed Saws. chen es- 
pecially for Speed Saws but can be used on all 
concave, convex, and straight breasted saws by 
merely adjusting screw. For hand and pruning 
saws, each, 90c; for cross cut saws, each, $1.65. 
Quick Release Snap— 
For Roberts Speed 
Saws and other tools 
commonly carried on 
the belt. Each, 35c. 
Saw Handles—For Rob- 
erts Speed Saws. No. 
2-14 and No. 5—65c; 
No. 1 and 8—60c; No. 
2—55c; No. 153—50c. For 
Atkins Saws—35c; Supple- 
mentary for cross cut—25c. 
\ 
THM UL, 
Atkins Safe Back Cant Saw File—Silver Steel File 
made of the same high grade material as the 
Silver Steel Saws. Length, 6 inches—35c; dozen 
Nae For Roberts Speed Saws, 50c; per dozen 


CIT 
LLL 

HU 

Tree Surgeon’s Socket Chisels and Socket Gouges 
To meet the severe requirements of chisels for 
tree surgery the blade and socket of these chisels 
are made from one piece of high grade alloy steel, 
with the upper section of the blade and the socket 
being extra heavy. Handle of hickory with turned 
steel ferrule. 
Chisels 
REET 

1% inches—$3.00 
Gouges 
¥% inch—$2.25 

1% inches—$3.25 
Extra handles, 25c each 
¥% inch—$2.50 
Bit Extensions 
The positive lock prevents loosening of the hold- 
ing sleeve, insuring absolute grip on the shank at 
all times. These extensions are so designed that 
they will drive a bit up to 1 inch in diameter 
and yet follow a 5% inch bit. 
18 inch length $2.25 24 inch length ___. 

$2.40 

-——~ 


> 
Atkins Slim Taper Files—Made from genuine 
Silver Steel and are recommended for use in 
refitting Atkins Pruning Saws. Length, 6 inches 
—30c each; dozen—$2.45. For Roberts Speed 
Saws, 35c; per dozen—$3.10. 
". 


Swan Rachet Auger Handle 



& | 
A valuable tool for drilling in close crotches and 
under limbs, as both handles are removable. 
Handles of hardwood reinforced with a steel bolt. 
Steel center. Fifteen inches long. Each $4.00. 
Swan Auger Handle—Same as above but without 
rachet. Both handles removable. Each, $1.85. 

Cavity Slicks—Oval and Taper Spoons—Necessary 
to the proper finishing of cavity fillings. Width, 
1 inch, 86c; 1% inch, $1.12. 
2. ——__—_ 
GREENLEE TOOLS 
11 
Tree Rod Bits 
Especially designed for tree surgery, these bits 
are made from very tough alloy material and are 
heat treated full length for greater strength. The 
single-spiral twist provides best chip clearance. 
These bits are perfectly finished and highly pol- 
ished and should not be confused with poorer 
quality bits that sell at a lower price. 
12 inch twist 24 inch twist 
18 inch length 30 inch length 
Pi 1G anche $1.45.—59/16cinch = Se $2.80 
Aly shea 156 Ole l/c ae ch eee 3.36 
Ei / Osan Wee 1752S / 16h och ae 3.90 
ESPLO INCh ee 3S in 
Above 12 inch twist bits with 
Total length 36 inches, 
For extra lengths 
Extension Bits. 
stiff steel square shanks. 
add 65 cents to above prices. 
add 15c per foot. 
Solid Center Auger Bits 

Double cutter head with two extension lips, 
solid center and single special twist. These bits 
are perfectly finished, highly polished, and of finest 
quality. 
3) 1G iC i ee ee ee AQe 9716 inch eee 35c 
APG iC pecomice es. joc) 7/16 mech 2-2 40c 
