WISEMAN-DOWNS CO., INC. - 34 E. PRATT ST. - BALTIMORE, MD. 71 
The Electric Carpenter 
DOES 35 DIFFERENT WOODWORKING OPERATIONS—A COMPLETE PLANING MILL 
Today the small machine is coming into its own. The old theory—‘‘that it was necessary to have bulk and weight 
in order to have strength’’—has been exploded. Today clumsy, old fashioned machines that weigh a ton are being’ re- 
placed by high-speed, ball-bearing machines less than one-fourth their weight. Experienced woodworkers are amazed, and 
agree the Electric Carpenter can turn out more work than five tons of old-fashioned, single purpose machines and ninety 
percent of the work of a one-ton combination machine. 
Here is the Electric Carpenter—650 pounds—a compact arrangement of practical units, highly developed for the 
accuracy required in pattern and cabinet shops, that actually does the work of seven separate machines. A complete 
Mihgesa shop! An efficient, direct-drive, frictionless, ball-bearing machine, capable of handling 2 in., 3 in. and 4 in. 
work rapidly. 
No other combination machine will do fine, accurate work and cut full sized lumber in so little floor space. And the 
Electric Carpenter is built for long use and rough service. ; 
Simplicity of construction—and quantity production—permit a low price that enables the carpenter to turn out his 
own mill work—at a substantial saving of time and money. 
A price that makes it easy to get into business for yourself! 
The machine can also be furnished at a slight additional cost with 25 cycle, 50 cycle or 32 volt motors. 
It can also be furnished with gasoline driven equipment at slightly additional charge. 


NOTE—band saw can be dropped 
to horizontal position by merely 
releasing a pin, it folds over on its 
horizontal support leaving table un- 
hampered for handling large veneer 
panels, etc.—see below. 

SEVEN MACHINES IN ONE 
1.8% SAW TABLE—For cross cutting, mitering, ripping, bevel-ripping, dadoing, ploughing, grooving, rabbeting. Throat 
' 2 inches wide to accommodate moulding head, wide cutters, etc. ‘ i 
2. JOINTER—For glue joint surfaces in flat sides, glue joint surfaces on edges, either square or bevel champfering. 
3. BAND SAW—For all varieties of band sawing, notching, tenoning, circle cutting, segments, sun bursts, brackets, 
\tilting table bevel cutting. : 
4. SHAPER—For mouldings, quarter round, half round, screen mouldings, shaping, edges on table tops, bases and many 
other jobs. ; : 
5. SPEED SPINDLE—For disc sanding, tool grinding, buffing, polishing, carving with flexible shaft. Takes ¢éhuck for 
» #8 boring bits, ete. : 
6. MORTISER—For screens, screen doors, sash, frames, furniture, accurate cabinet work where powerful leverage and 
accurate machined table are necessary. ; : : 
7. LATHE—For wood turning of all kinds, table legs, handles, spokes, rounds, bases, knobs, trim, spindles, beading, ete. 
ea Price - $325.00 


MASTERS HAND FERTILIZER DISTRIBUTORS 

A strong sturdy practical machine for the even distribution of Commercial Fertilizer, Grass Seed, Top Dressing and 
other material. 
PRICES: 
TBlospave Ubeismeray ID NEAR ITB NWOTE a scon cere, obechen uecledoadso ech) cehtdbtb bee ceonuecouesuediacesne® tapge oe: abpsdocce Sa oKor 7 seesseps(a aude seo dneeac2 ee 
No. M180—_Perfect 24 inch for Small Hstates............-c:ccccusssenscerecesctsecercnenteeescerenscessaserseenseserenrens oD 
No. M241—Perfect 36 inch for Parks, Golf Courses, Hte.......0..0cccc etc etetete i tertices 16. 
