Telephone: Atlantic 2022 
The Sterling Grindstone 
A strong, easy-running, and 
modern Grindstone. The frame 
is of 145 and 114-inch heavy steel 
tubing, securely braced to form 
a rigid comfortable operating 
unit. Cranks and crankshaft are 
fitted with improved ball-bear- 
ings, fully encased to keep out 
dirt. The shaft is cold rolled steel 
and the shaft bearings are hard- 
ened steel, to prevent wear. All 
castings are malleable iron. 
Mounted with an Ohio Stone, 19 
to 22 inches diameter, 134 to 214 
inches thick. $13. 
The No. 115 Mounted 
Grindstone 
A GOOD BALL-BEARING GRIND- 
STONE AT A POPULAR PRICE 
The No. 115 Mounted Grindstone is 
designed to meet the demand for a low- 
priced Grindstone. The frame is con- 
structed of 1-inch by 5-inch angle steel 
substantially braced, is fitted with ball- 
bearings on shaft and crank, and a cold 
rolled-steel shaft which is detachable. 
It has a double treadle and is furnished 
with comfortable seat and clothes pro- 
tector. Mounted with a good Ohio 
stone, 20 inches diameter, 134 to 
2 inches thick. Weight of stone about 
50 pounds. $9. 



















Harvest King 
Power Grindstone 
The Harvest King Roller-bear- 
ing Power Grindstone is designed 
to meet the needs of the farmer 
who desires a Grindstone to be 
operated by a gasoline engine. 
The frame is of heavy angle steel, 
1144x114 x in, strongly braced. 
Equipped with high-grade,  se- 
lected Cleveland Grindstone, 24 
inches in diameter and 2 inches 
thick. Pulley 12 in. diameter x 23 
inches. Heavy steel roller bear- 
ings. Weight, complete, about 
140 pounds. Shipped knocked 
down but easily set up in a few 
minutes. Price, complete, with 
hand-crank, pulley, drip-cup, 
trough, and treadle attachment, 
$15. 
ke — Carborundum 
a ae File 
Mighty handy for the farmer and gardener. Cuts quickly and 
freely, and gives better, cleaner edge than the steel File, and in less 
time. For sharpening mower sections and practically any edged 
farm and garden tool. No. 57. $1, postage 10 cts. extra. 
Plymouth Binder Twine 
Plymouth Twine is smooth spun from the best fibers, is of full 
ghee: and strength and gives fine performance in the harvest 
eld. 
We can supply Standard Twine in both 10-ball and 6-ball bales. 
Write for prices. 

THE |. W. SCOTT CO.., Pittsburgh, Pa. 71 
Luther Farm Grinder 
Designed especially for the farmer who wants a good quality 
hand-power sickle and tool-grinder. 
Substantial construction; 
ball-bearing 
thrust — elimi- 
> nates friction 
and end-play 
Pigee-h att? 
Clamps on 
mower wheel 
; or bench: 
Drive-gear and pinion 
machine cut. Ball- 
®& bearings on wheel- 
yy shaft. Special sickle- 
: ~ holding attachment; 
easy and simple to grind mower knives. Grinds six sections before 
reclamping. Holds any length sickle-bar. No.85. With 4% x 1% in. 
Medium Dimo-Grit Tool-Grinding Wheel $11.40, postpaid. 
No. 82. Similar to No. 85 but not ball-bearing and without Tool- 
Grinding Wheel. (Not illustrated.) $8.55. 
No. LX3. A popular farm Grinder at a low price. (Not illus- 
trated.) With sickle wheel and 4 x 1-in. tool wheel, $7.30. 



Scythe Stones 
Carborundum Brand Scythe Stones. Made in just the right grit 
to give a proper edge. No.190. 10 in. long, 25 cts. 
No. 191. 12 in. long, 35c. No. 192. 10 in. long (heavy), 30c. 
Aloxite Brand Scythe Stones. Cut fast and clean. No. 188. 10 in. 
long, 20 cts. No. 188R. 10 in. long (steel wire in center), 25 cts. 
English Scythe Stones. Zalacre Pattern. 12-in., 50 cts. each. 
Baked Milan Scythe Stones. German Paitern. 914-in., 10c. each. 
Steel Wheels to Fit Old Wagons 
Y 


GIVE LENGTH AXLE HERE J Ty. 
Give Exact Sizes. We Allow for Plag 
In ordering, give measurements as shown in illustration, 
Ready-Made Steel Wheels 
Furnished only in heights and tire size indicated and to fit 
any of the skeins listed below. All wheels have deep groove tires. 
4x 3in. tire 4x %in. tire 
24-inehel shiver sateen CAS Seles 2-1 helohit sameeren $5 75 
28-ine height oer ss. sree An 0 Siala3 Onin hielo hits aeieereaiers 6 85 
Diameter Skein Sizes 
Length Largeend Small end Collar Nut 
9 in. 3% in. 214 in. Up to 5 8% in. Up to 33% in. 
10 in. 344 in. 214 in, Up to 5 8% in. Up to 3% in. 
10 in. 3% in. 214 in. Up to 5 % in. Up to 3% in. 
10 in. 31% in. 21% in. Up to 5% in. Up to 3% in. 
Made-to-Measure Steel Wheels 
The following prices apply to other skein sizes than given above. 
4x 3-in. tire 4x 3-in. tire 
26-ine height tives. eter tel PS ROOM O21 Melo tame races) ocrs $6 89 
2S=in here hitters ete ee SOOM a s4ainehelghit wer punciers sete eis ieee 
30sins heightens ere 6 31 SOs Nelo hie mmr setae eels 7 79 
Other heights and tire sizes quoted on request. 
Steel Wheels for Rubber Tires 
With 16x 4.00 D.C. rims to fit 5.50, 6.00, 6.25 or 6.50 rubber 
tires. Not recommended for high speeds. Tires not furnished. 
Price, Spoke or disc type as ordered, with hubs to fit stock 
skeins listed above, $5.45; Spoke type only with hubs to fit 
skeins other than stock sizes listed above, $6.25. 
All wheel prices are for one wheel and are f.o.b. factory. 
